From: Po-Yu Chuang <ratb...@faraday-tech.com>
- add CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR
- do not update gd->bd in dram_init() because bd is unavailable then
Signed-off-by: Po-Yu Chuang <ratb...@faraday-tech.com>
---
board/faraday/a320evb/a320evb.c | 3 +--
include/configs/a320evb.h | 10 +++++++---
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/board/faraday/a320evb/a320evb.c b/board/faraday/a320evb/a320evb.c
index 85b11b9..b9343e4 100644
--- a/board/faraday/a320evb/a320evb.c
+++ b/board/faraday/a320evb/a320evb.c
@@ -46,8 +46,7 @@ int dram_init(void)
actual_size = get_ram_size((void *)sdram_base, expected_size);
- gd->bd->bi_dram[0].start = sdram_base;
- gd->bd->bi_dram[0].size = actual_size;
+ gd->ram_size = actual_size;
if (expected_size != actual_size)
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h
index 0284d40..97bf8b9 100644
--- a/include/configs/a320evb.h
+++ b/include/configs/a320evb.h
@@ -138,15 +138,19 @@
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000
- \
+ GENERATED_GBL_DATA_SIZE)
+
/*
* Load address and memory test area should agree with
* board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x12000000
+#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x2000000)
/* memtest works on 63 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_START 0x10000000
-#define CONFIG_SYS_MEMTEST_END 0x13F00000
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x3F00000)
#define CONFIG_SYS_TEXT_BASE 0
--
1.6.3.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
