On 22.8.2021 14.50, Marek Vasut wrote:
> On 8/22/21 9:41 AM, Oskari Lemmelä wrote:
>> Hi Marek,
>>
>> I was bisecting SPI flash boot problem in rockpro64 board and commit
>> e2e95e5e25421fb seems to broke it.
>>
>> It seems that after speed and mode change SPL is unable to load BL31
>> anymore from SPI flash device.
>> There is no errors it just hangs forever.
>>
>> If I change default mode to 0 (CONFIG_SF_DEFAULT_MODE=0), loading
>> BL31 seems to work. In that case spi_set_speed_mode is also called
>> but only speed is changed from 1Mhz to 10Mhz.
>>
>> So changing mode from 0 to 3 in SPL stage seems to be the problem.
>>
>> Any idea what could be the problem?
>
> See 8c6d8c3219 ("configs: libretech: set SPI mode to 0")Rockchip SPI supports both SCLK polarity and phase config and mode 3 is working fine if uboot is booted from MMC. However RK3399 documentation says SPI should be disabled while modifying master settings (speed, mode and so on). So this could be rk_spi.c driver issue. Oskari
