HS400_ES is missed when down grade to HS mode during
device_remove the mmc device
Signed-off-by: Ye Li <ye...@nxp.com>
---
drivers/mmc/mmc.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index a1fd533..3cb6fda 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -2092,14 +2092,16 @@ static int mmc_select_mode_and_width(struct mmc *mmc,
uint card_caps)
}
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
- CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
+ CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) || \
+ CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
/*
* In case the eMMC is in HS200/HS400 mode, downgrade to HS mode
* before doing anything else, since a transition from either of
* the HS200/HS400 mode directly to legacy mode is not supported.
*/
if (mmc->selected_mode == MMC_HS_200 ||
- mmc->selected_mode == MMC_HS_400)
+ mmc->selected_mode == MMC_HS_400 ||
+ mmc->selected_mode == MMC_HS_400_ES)
mmc_set_card_speed(mmc, MMC_HS, true);
else
#endif
@@ -2952,7 +2954,7 @@ int mmc_deinit(struct mmc *mmc)
return sd_select_mode_and_width(mmc, caps_filtered);
} else {
caps_filtered = mmc->card_caps &
- ~(MMC_CAP(MMC_HS_200) | MMC_CAP(MMC_HS_400));
+ ~(MMC_CAP(MMC_HS_200) | MMC_CAP(MMC_HS_400) |
MMC_CAP(MMC_HS_400_ES));
return mmc_select_mode_and_width(mmc, caps_filtered);
}
--
2.7.4
