[PATCH 4/7] imx8mp_evk: Fix incorrect cascade for FEC and EQOS setup

[Ye Li]

The setup functions should be independent for two ethernet controllers

Signed-off-by: Ye Li <ye...@nxp.com>
---
 board/freescale/imx8mp_evk/imx8mp_evk.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/freescale/imx8mp_evk/imx8mp_evk.c 
b/board/freescale/imx8mp_evk/imx8mp_evk.c
index 89cc17c..bc4753c 100644
--- a/board/freescale/imx8mp_evk/imx8mp_evk.c
+++ b/board/freescale/imx8mp_evk/imx8mp_evk.c
@@ -101,9 +101,10 @@ int board_init(void)
 
        if (CONFIG_IS_ENABLED(FEC_MXC)) {
                setup_fec();
+       }
 
-               if (CONFIG_IS_ENABLED(DWC_ETH_QOS))
-                       ret = setup_eqos();
+       if (CONFIG_IS_ENABLED(DWC_ETH_QOS)) {
+               ret = setup_eqos();
        }
 
        return ret;
-- 
2.7.4