Hello Gerald, On Sat, Aug 14, 2021 at 9:59 AM Gérald Kerma <gand...@gk2.net> wrote: > > Héllo, > > Message: 2 > > Date: Fri, 13 Aug 2021 12:03:57 +0200 > > From: Luka Kovacic<luka.kova...@sartura.hr> > > To: Pali Roh?r<p...@kernel.org> > > Cc:u-boot@lists.denx.de, Robert Marko<robert.ma...@sartura.hr>, > > Luka Perkov<luka.per...@sartura.hr>, Marek Behun > > <marek.be...@nic.cz>,s...@denx.de,s...@chromium.org, > > patrick.delau...@foss.st.com,xypron.g...@gmx.de > > Subject: Re: [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra > > board support > > Message-ID: > > <cadzsf3bukpgujq_2yp1zakqbf0hoq_4opldi69_d+qor+hb...@mail.gmail.com> > > Content-Type: text/plain; charset="UTF-8" > > > > Hello Pali, > > > > On Fri, Aug 13, 2021 at 11:27 AM Pali Roh?r<p...@kernel.org> wrote: > >> On Friday 13 August 2021 01:39:38 Luka Kovacic wrote: > >>> Add initial support for the ESPRESSOBin-Ultra board from Globalscale > >>> Technologies, Inc. > >>> > >>> The board is based on the 64-bit dual-core Marvell Armada 3720 SoC. > >>> Peripherals: > >>> - 5 Gigabit Ethernet ports (WAN has PoE, up to 30W, Topaz 6341 switch) > >>> - RTC clock (PCF8563) > >>> - USB 3.0 port > >>> - USB 2.0 port > >>> - 4x LED > >>> - UART over Micro-USB > >>> - M.2 slot (2280) > >>> - Mini PCI-E slot > >>> > >>> Additionally, automatic import of the Marvell hw_info parameters is > >>> enabled via the recently added mac command for A37XX platforms. > >>> The parameters stored in Marvell hw_info are usually the board serial > >>> number and MAC addresses. > >>> > >>> Signed-off-by: Luka Kovacic<luka.kova...@sartura.hr> > >>> Cc: Luka Perkov<luka.per...@sartura.hr> > >>> Cc: Robert Marko<robert.ma...@sartura.hr> > >>> --- > >>> arch/arm/dts/Makefile | 1 + > >>> .../arm/dts/armada-3720-espressobin-ultra.dts | 114 ++++++++++ > >>> arch/arm/dts/armada-3720-espressobin.dts | 199 +---------------- > >>> arch/arm/dts/armada-3720-espressobin.dtsi | 210 ++++++++++++++++++ > >>> board/Marvell/mvebu_armada-37xx/MAINTAINERS | 8 + > >>> board/Marvell/mvebu_armada-37xx/board.c | 92 +++++++- > >>> .../mvebu_espressobin-ultra-88f3720_defconfig | 93 ++++++++ > >>> 7 files changed, 514 insertions(+), 203 deletions(-) > >>> create mode 100644 arch/arm/dts/armada-3720-espressobin-ultra.dts > >>> create mode 100644 arch/arm/dts/armada-3720-espressobin.dtsi > >>> create mode 100644 configs/mvebu_espressobin-ultra-88f3720_defconfig > >> ... > > Thanks, all, for this job. > > I am available for testing (if needed) on EspressoBin V7, with eMMC, and > EspressoBin Ultra.
Thanks for offering your help. Can you test the following patchset (v4), when it's out, as some implementation issues still have to be resolved here? > > I have issue on EspressoBin Ultra, with the v2 patch for > EspressoBin-Ultra, on OpenWrt 21.02-RC, fw_printenv do not works... (CRC > Error) > I have the same issue with the Marvell (GlobalScale) u-Boot, factory and > upgraded version. Did you specify the U-Boot environment location correctly in the fw_printenv config? > Environments variables are correctly managed from the u-Boot itself. > > Regards, > Gérald Kerma > > PS : I am only registered to the digest, so I hope my mail will not be > disturbing... Kind regards, Luka
