On 13.08.21 13:56, Pali Rohár wrote:
SATA disks could be connected via mPCIe add-in card with PCIe-SATA
controller into Mox-B or Mox-G module.
Signed-off-by: Pali Rohár <p...@kernel.org>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
configs/turris_mox_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig
index c19b8379c32a..fc5e1fc3766f 100644
--- a/configs/turris_mox_defconfig
+++ b/configs/turris_mox_defconfig
@@ -12,6 +12,7 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="armada-3720-turris-mox"
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
@@ -32,6 +33,7 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_WDT=y
@@ -47,6 +49,8 @@ CONFIG_MAC_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
@@ -81,6 +85,8 @@ CONFIG_PINCTRL_ARMADA_37XX=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_RTC=y
CONFIG_RTC_DS1307=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_MVEBU_A3700_UART=y
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
