When trying to build the imx8mm-cl-iot-gate_defconfig target there is a
build error due to the missing 'fip.bin'.
To make the build process more consistent with other i.MX8M boards,
do not build fip.bin by default.
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 14 +-------------
1 file changed, 1 insertion(+), 13 deletions(-)
diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
index 3226a244a97e..00927c157449 100644
--- a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
@@ -217,18 +217,6 @@
};
};
- fip {
- description = "Trusted Firmware FIP";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- load = <0x40310000>;
-
- fip_blob: blob-ext{
- filename = "fip.bin";
- };
- };
-
fdt {
description = "NAME";
type = "flat_dt";
@@ -246,7 +234,7 @@
conf {
description = "NAME";
firmware = "uboot";
- loadables = "atf", "fip";
+ loadables = "atf";
fdt = "fdt";
};
};
--
2.25.1
