On an NXP LX2160 based platform it has been noticed, that the currently implemented memset/memcpy functions for aarch64 are suboptimal. Especially the memset() for clearing the NXP MC firmware memory is very expensive (time-wise).
By using optimized functions, a speedup of ~ factor 6 has been measured. This patchset now adds the optimized functions ported from this repository: https://github.com/ARM-software/optimized-routines As the optimized memset function make use of the dc opcode, which needs the caches to be enabled, an additional check is added and a simple memset version is used in this case. Please note that checkpatch.pl complains about some issue with this imported file: arch/arm/lib/asmdefs.h Since it's imported I did explicitly not make any changes here, to make potential future sync'ing easer. Thanks, Stefan Changes in v3: - Add memmove alias, as this function also handles it optimized - Add memmove as well Changes in v2: - Add file names and locations and git commit ID from imported files to the commit message - New patch Stefan Roese (3): arm64: arch/arm/lib: Add optimized memset/memcpy/memmove functions arm64: memset-arm64: Use simple memset when cache is disabled arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove arch/arm/Kconfig | 38 +++++- arch/arm/include/asm/string.h | 4 + arch/arm/lib/Makefile | 5 + arch/arm/lib/asmdefs.h | 98 ++++++++++++++ arch/arm/lib/memcpy-arm64.S | 242 ++++++++++++++++++++++++++++++++++ arch/arm/lib/memset-arm64.S | 146 ++++++++++++++++++++ 6 files changed, 527 insertions(+), 6 deletions(-) create mode 100644 arch/arm/lib/asmdefs.h create mode 100644 arch/arm/lib/memcpy-arm64.S create mode 100644 arch/arm/lib/memset-arm64.S -- 2.32.0
