This rule should not be in the top-level Makefile. Move it, making use
of the new LEGACY_DMA Kconfig.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Makefile | 1 -
drivers/Makefile | 3 ++-
drivers/dma/Kconfig | 1 +
3 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index 7fc982158e9..f5b6b493a7f 100644
--- a/Makefile
+++ b/Makefile
@@ -813,7 +813,6 @@ libs-y += fs/
libs-y += net/
libs-y += disk/
libs-y += drivers/
-libs-y += drivers/dma/
libs-y += drivers/gpio/
libs-y += drivers/net/
libs-y += drivers/net/phy/
diff --git a/drivers/Makefile b/drivers/Makefile
index 1bce26877bc..d63cc48f5f4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,6 +5,8 @@ obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/
obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
obj-$(CONFIG_$(SPL_TPL_)DM) += core/
+obj-$(CONFIG_$(SPL_TPL_)DMA) += dma/
+obj-$(CONFIG_$(SPL_TPL_)DMA_LEGACY) += dma/
obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/
obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/
@@ -48,7 +50,6 @@ obj-$(CONFIG_SPL_POWER) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER) += power/regulator/
obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
obj-$(CONFIG_SPL_DM_RESET) += reset/
-obj-$(CONFIG_SPL_DMA) += dma/
obj-$(CONFIG_SPL_ETH) += net/
obj-$(CONFIG_SPL_ETH) += net/phy/
obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index ff5b834a91e..bbeec794df9 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -56,6 +56,7 @@ config TI_EDMA3
config APBH_DMA
bool "Support APBH DMA"
depends on MX23 || MX28 || MX6 || MX7 || IMX8 || IMX8M
+ select DMA_LEGACY
help
Enable APBH DMA driver.
--
2.32.0.605.g8dce9f2422-goog
