From: Sai Krishna Potthuri <lakshmi.sai.krishna.potth...@xilinx.com>
Replace 'io-standard' property with 'power-source' property in all
zynq dts files to be in sync with Zynq Pinctrl driver.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potth...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
arch/arm/dts/zynq-zc702.dts | 22 +++++++++++-----------
arch/arm/dts/zynq-zc706.dts | 18 +++++++++---------
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 4474f4bfd7b2..57a47409b915 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -213,7 +213,7 @@
conf {
groups = "can0_9_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -236,7 +236,7 @@
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -259,7 +259,7 @@
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -277,7 +277,7 @@
"gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
"gpio0_13_grp", "gpio0_14_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -301,7 +301,7 @@
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -314,7 +314,7 @@
conf {
groups = "gpio0_50_grp", "gpio0_51_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -327,7 +327,7 @@
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -341,7 +341,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -354,7 +354,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -367,7 +367,7 @@
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -390,7 +390,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 84729e9feba2..87308c0333d3 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -151,7 +151,7 @@
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -174,7 +174,7 @@
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -188,7 +188,7 @@
conf {
groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -212,7 +212,7 @@
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -225,7 +225,7 @@
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -239,7 +239,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -252,7 +252,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -265,7 +265,7 @@
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -288,7 +288,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
--
2.32.0
