On 23.07.21 08:39, Oleksandr Suvorov wrote:
From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
The USB recovery mode is used by Toradex to load the Toradex Easy
Installer image which supports further system images installation.
Prepare for loading and launching the Toradex Easy Installer if the
USB Recovery mode is activated.
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvo...@toradex.com>
---
Changes in v2:
- remove 2 patches not meet requirements.
END
board/toradex/apalis-tk1/apalis-tk1.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/board/toradex/apalis-tk1/apalis-tk1.c
b/board/toradex/apalis-tk1/apalis-tk1.c
index b97617cfca..f418f2c39f 100644
--- a/board/toradex/apalis-tk1/apalis-tk1.c
+++ b/board/toradex/apalis-tk1/apalis-tk1.c
@@ -38,8 +38,17 @@
int arch_misc_init(void)
{
if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
- NVBOOTTYPE_RECOVERY)
- printf("USB recovery mode\n");
+ NVBOOTTYPE_RECOVERY) {
+ printf("USB recovery mode, attempting to boot Toradex Easy
Installer\n");
+ env_set("bootdelay", "-2");
+ env_set("defargs", "pcie_aspm=off user_debug=30");
+ env_set("fdt_high", "");
+ env_set("initrd_high", "");
+ env_set("setup", "env set setupargs igb_mac=${ethaddr}
consoleblank=0 no_console_suspend=1 console=${console},${baudrate}n8 ${memargs}");
+ env_set("teziargs", "rootfstype=squashfs root=/dev/ram quiet
autoinstall");
+ env_set("vidargs", "video=HDMI-A-1:640x480-16@60D");
+ env_set("bootcmd", "run setup; env set bootargs ${defargs}
${setupargs} ${vidargs} ${teziargs}; bootm
0x80208000#config@${soc}-${fdt_module}-${fdt_board}.dtb");
These above are very long lines making checkpatch unhgappy. Can we
switch to a multiline ?
Best regards,
Stefano
+ }
/* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */
gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication");
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
