чт, 5 авг. 2021 г. в 01:39, Tom Rini <tr...@konsulko.com>: > > On Wed, Aug 04, 2021 at 11:38:02PM +0300, Matwey V. Kornilov wrote: > > > Hi, > > > > I am trying to boot an am335x based board (BeagleBone Black) from USB > > using v2021.07. I see the following issue when trying to boot via USB > > (USB based network): > > > > > > U-Boot SPL 2021.07-00013-gd0f1ad9f23 (Aug 02 2021 - 21:29:57 +0300) > > Trying to boot from USB eth > > ## Error: flags type check failure for "ethaddr" <= "40309614M" (type: m) > > ## Error inserting "ethaddr" variable, errno=1 > > eth0: eth_cpsw## Error: flags type check failure for "eth1addr" <= > > "81f01114M" (type: m) > > ## Error inserting "eth1addr" variable, errno=1 > > , eth1: usb_ether > > eth_cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! > > Problem booting with BOOTP > > SPL: failed to boot from all boot devices > > ### ERROR ### Please RESET the board ### > > > > > > I suppose that _env_flags_validate_type doesn't like this "M" suffix. > > But I don't know where it came from. > > What does the environment look like here?
How could I ask SPL about the environment? I suppose the environment is clean/default, there is no source for it. > > -- > Tom -- With best regards, Matwey V. Kornilov
