When using OP-TEE, address range [0x20000000 - 0x22000000] is reserved.
This modification allows to have a system which always work even when
OP-TEE is present.
Signed-off-by: Clément Léger <clement.le...@bootlin.com>
---
include/configs/sama5d27_som1_ek.h | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/include/configs/sama5d27_som1_ek.h
b/include/configs/sama5d27_som1_ek.h
index 8942d15934..2e937c8309 100644
--- a/include/configs/sama5d27_som1_ek.h
+++ b/include/configs/sama5d27_som1_ek.h
@@ -14,15 +14,11 @@
#undef CONFIG_SYS_AT91_MAIN_CLOCK
#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE 0x20000000
-#define CONFIG_SYS_SDRAM_SIZE 0x8000000
-
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR 0x218000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+ (0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
@@ -30,10 +26,10 @@
#undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_SD_BOOT
/* bootstrap + u-boot + env in sd card */
-#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART "
0x21000000 " \
+#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART "
0x22000000 " \
CONFIG_DEFAULT_DEVICE_TREE ".dtb; " \
- "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART "
0x22000000 zImage; " \
- "bootz 0x22000000 - 0x21000000"
+ "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART "
0x23000000 zImage; " \
+ "bootz 0x23000000 - 0x22000000"
#endif
/* SPL */
--
2.32.0
