On 13/07/2021 08:48, Artem Lapkin wrote: > phy-names was improperly implemented resulting in an inoperable USB-OTG > port. > > - phy-names = "usb2-phy0\0\0usb2-phy1\0"; > + phy-names = "usb2-phy0\0usb2-phy1"; > > Signed-off-by: Artem Lapkin <[email protected]> > --- > board/amlogic/vim3/vim3.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c > index c8ebd676..6a67a39c 100644 > --- a/board/amlogic/vim3/vim3.c > +++ b/board/amlogic/vim3/vim3.c > @@ -109,8 +109,8 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) > } > > /* Update PHY names (mandatory to disable USB3.0) */ > - len = strlcpy(data, "usb2-phy0", 32) + 1; > - len += strlcpy(&data[len], "usb2-phy1", 32 - len) + 1; > + len = strlcpy(data, "usb2-phy0", 32); > + len += strlcpy(&data[len], "usb2-phy1", 32 - len); > ret = fdt_setprop(blob, node, "phy-names", data, len); > if (ret < 0) { > printf("vim3: failed to update usb phy names property > (%d)\n", ret); >
Applied to u-boot-amlogic, Thanks, Neil
