On 7/24/21 5:10 PM, Ashok Reddy Soma wrote:
> Since set_control_reg is available in sdhci.c, use it and remove
> arasan_sdhci_set_control_reg().
>
> Signed-off-by: Ashok Reddy Soma <ashok.reddy.s...@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>
Best Regards,
Jaehoon Chung
> ---
>
> drivers/mmc/zynq_sdhci.c | 21 +--------------------
> 1 file changed, 1 insertion(+), 20 deletions(-)
>
> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
> index a192f60320..93d453a284 100644
> --- a/drivers/mmc/zynq_sdhci.c
> +++ b/drivers/mmc/zynq_sdhci.c
> @@ -600,29 +600,10 @@ static void arasan_dt_parse_clk_phases(struct udevice
> *dev)
> "clk-phase-mmc-hs400");
> }
>
> -static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
> -{
> - struct mmc *mmc = (struct mmc *)host->mmc;
> - u32 reg;
> -
> - if (!IS_SD(mmc))
> - return;
> -
> - if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
> - reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> - reg |= SDHCI_CTRL_VDD_180;
> - sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
> - }
> -
> - if (mmc->selected_mode > SD_HS &&
> - mmc->selected_mode <= MMC_HS_200)
> - sdhci_set_uhs_timing(host);
> -}
> -
> static const struct sdhci_ops arasan_ops = {
> .platform_execute_tuning = &arasan_sdhci_execute_tuning,
> .set_delay = &arasan_sdhci_set_tapdelay,
> - .set_control_reg = &arasan_sdhci_set_control_reg,
> + .set_control_reg = &sdhci_set_control_reg,
> };
> #endif
>
>
