Set MC Firmware size in read commands in
env to 2MB.
Signed-off-by: Priyanka Jain <priyanka.j...@nxp.com>
---
include/configs/ls2080ardb.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 8626a1d5e6..3cc3b44678 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -319,11 +319,11 @@ unsigned long get_board_sys_clk(void);
"env exists secureboot && " \
"esbc_validate 0x80640000 && " \
"esbc_validate 0x80680000; " \
- "sf read 0x80a00000 0xa00000 0x300000; " \
+ "sf read 0x80a00000 0xa00000 0x200000; " \
"sf read 0x80e00000 0xe00000 0x100000; " \
"fsl_mc start mc 0x80a00000 0x80e00000 \0"
#define SD_MC_INIT_CMD \
- "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \
+ "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \
"mmc read 0x80e00000 0x7000 0x800;" \
"env exists secureboot && " \
"mmc read 0x80640000 0x3200 0x20 && " \
@@ -344,12 +344,12 @@ unsigned long get_board_sys_clk(void);
"env exists secureboot && " \
"esbc_validate 0x80640000 && " \
"esbc_validate 0x80680000; " \
- "sf read 0x80a00000 0xa00000 0x300000; " \
+ "sf read 0x80a00000 0xa00000 0x200000; " \
"sf read 0x80e00000 0xe00000 0x100000; " \
"fsl_mc start mc 0x80a00000 0x80e00000 \0"
#elif defined(CONFIG_SD_BOOT)
#define MC_INIT_CMD \
- "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x1000;" \
"mmc read 0x80100000 0x7000 0x800;" \
"env exists secureboot && " \
"mmc read 0x80640000 0x3200 0x20 && " \
--
2.17.1
