When copying the "sed" script to generate the asm-offsets.h file from
the Linux Kbuild script into the make-asm-offsets file I missed the
fact that the former runs in a "make" context and thus uses double
"$$" to escape a single "$", while the latter is a shell script, where
this must not be done. Unfortunately the problem did not show up
during the initial tests on Power Architecture systems, but on ARM the
generated asm-offsets.h was not correct.
Signed-off-by: Wolfgang Denk <w...@denx.de>
---
tools/scripts/make-asm-offsets | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/scripts/make-asm-offsets b/tools/scripts/make-asm-offsets
index 61c095f..4c33756 100755
--- a/tools/scripts/make-asm-offsets
+++ b/tools/scripts/make-asm-offsets
@@ -8,8 +8,8 @@ mkdir -p $(dirname $2)
# Default sed regexp - multiline due to syntax constraints
SED_CMD="/^->/{s:->#\(.*\):/* \1 */:; \
- s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \
- s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:^->\([^ ]*\) [\$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \
+ s:^->\([^ ]*\) [\$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}"
(set -e
--
1.7.2.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
