On 7/5/21 11:18 AM, Bin Meng wrote:
Hi Andre,
On Mon, Jul 5, 2021 at 5:07 PM Andre Przywara <andre.przyw...@arm.com> wrote:
On Mon, 5 Jul 2021 16:38:29 +0800
Bin Meng <bmeng...@gmail.com> wrote:
Hi,
On Mon, Jul 5, 2021 at 4:19 PM Marek Vasut <ma...@denx.de> wrote:
On 7/5/21 10:04 AM, Bin Meng wrote:
On Sat, Apr 17, 2021 at 10:21 PM Samuel Holland <sam...@sholland.org> wrote:
Resetting an XHCI controller inside xhci_register undoes any register
setup performed by the platform driver. And at least on the Allwinner
H6, resetting the XHCI controller also resets the PHY, which prevents
the controller from working. That means the controller must be taken out
of reset before initializing the PHY, which must be done before calling
xhci_register.
The logic in the XHCI core was added to support the Raspberry Pi 4
(although this was not mentioned in the commit log!), which uses the
xhci-pci platform driver. Move the reset logic to the platform driver,
where it belongs, and where it cannot interfere with other platform
drivers.
This also fixes a failure to call reset_free if xhci_register failed.
Fixes: 0b80371b350e ("usb: xhci: Add reset controller support")
Signed-off-by: Samuel Holland <sam...@sholland.org>
---
drivers/usb/host/xhci-mem.c | 2 --
drivers/usb/host/xhci-pci.c | 51 ++++++++++++++++++++++++++++++++++---
drivers/usb/host/xhci.c | 35 -------------------------
include/usb/xhci.h | 2 --
4 files changed, 47 insertions(+), 43 deletions(-)
Reviewed-by: Bin Meng <bmeng...@gmail.com>
So shall we apply this whole thing for 2021.10 ?
Yes. Andre wanted to get this in 2021.07 which is too late.
Ah, sorry, I didn't mean into this release, but into the 2021.10 merge
window. I was preparing the sunxi patches for the PR, so stumbled upon
this.
Ah, 2021.01 is not a problem.
So I'd be grateful if you could push this into the MW, I can then
finish up the sunxi side of things (patch 4/4).
Marek can pick up this soon.
U-Boot CI seems to fail on this, please recheck that.
