From: Tim Harvey <thar...@gateworks.com>
Add support for determining host vs peripheral mode for IMX8MM
and IMX8MN configured as OTG.
Signed-off-by: Tim Harvey <thar...@gateworks.com>
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
drivers/usb/host/ehci-mx6.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index ff23a5e35e64..de53f0c15204 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -523,7 +523,7 @@ static int ehci_usb_phy_mode(struct udevice *dev)
plat->init_type = USB_INIT_DEVICE;
else
plat->init_type = USB_INIT_HOST;
- } else if (is_mx7()) {
+ } else if (is_mx7() || is_imx8mm() || is_imx8mn()) {
phy_status = (void __iomem *)(addr +
USBNC_PHY_STATUS_OFFSET);
val = readl(phy_status);
--
2.25.1
