[PATCH v2 4/9] board: phytec: phycore_imx8mp: Change debug UART

[Teresa Remmet]

With the first redesign the debug UART had changed from
UART2 to UART1.
As the first hardware revision is considered as alpha and
will not be supported in future. The old setup will not
be preserved.

Signed-off-by: Teresa Remmet <t.rem...@phytec.de>
---
 arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 4 ++--
 board/phytec/phycore_imx8mp/spl.c                   | 6 +++---
 include/configs/phycore_imx8mp.h                    | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi 
b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
index 6c1528934a98..32ed037e3721 100644
--- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
@@ -18,7 +18,7 @@
        u-boot,dm-spl;
 };
 
-&pinctrl_uart2 {
+&pinctrl_uart1 {
        u-boot,dm-spl;
 };
 
@@ -54,7 +54,7 @@
        u-boot,dm-spl;
 };
 
-&uart2 {
+&uart1 {
        u-boot,dm-spl;
 };
 
diff --git a/board/phytec/phycore_imx8mp/spl.c 
b/board/phytec/phycore_imx8mp/spl.c
index f9fa8d1e1281..0bc4c7693b06 100644
--- a/board/phytec/phycore_imx8mp/spl.c
+++ b/board/phytec/phycore_imx8mp/spl.c
@@ -80,8 +80,8 @@ int board_fit_config_name_match(const char *name)
 #define WDOG_PAD_CTRL   (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 
 static iomux_v3_cfg_t const uart_pads[] = {
-       MX8MP_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX8MP_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+       MX8MP_PAD_UART1_RXD__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+       MX8MP_PAD_UART1_TXD__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
 static iomux_v3_cfg_t const wdog_pads[] = {
@@ -107,7 +107,7 @@ void board_init_f(ulong dummy)
 
        arch_cpu_init();
 
-       init_uart_clk(1);
+       init_uart_clk(0);
 
        board_early_init_f();
 
diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index 04900498507a..e24f223c21d3 100644
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -39,7 +39,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "image=Image\0" \
-       "console=ttymxc1,115200\0" \
+       "console=ttymxc0,115200\0" \
        "fdt_addr=0x48000000\0" \
        "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
@@ -87,7 +87,7 @@
 #define PHYS_SDRAM_SIZE                        0x80000000
 
 /* UART */
-#define CONFIG_MXC_UART_BASE           UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              SZ_2K
-- 
2.25.1