Ni Nelson,
On 6/17/21 2:21 PM, Su (US), Nelson Z wrote:
Hi U-Boot devs,
I am an engineer working for Boeing and I need assistance with getting a
MicroChip VSC6803 API (https://github.com/microchip-ung/mesa) to work on their
VSC7429 Ethernet Switch. From their API, we have a MFI image file built to load
onto the Switch and this was instructed to be done with U-Boot. The problem is
we have a board with a blank NOR chip, so we have no starting image to even get
U-Boot up. How would we get an image with U-Boot onto our NOR chip? We have SPI
connector for SPI NOR flash. Our board is a Luton26. We have no idea how to get
U-Boot loaded onto our chip. I read on the U-Boot project's README that U-Boot
can be installed in a boot ROM, but I have no idea how to do that.
Although I am not familiar with this particular chip, it sounds like you
might need a hardware flasher, like a DediProg.
Please help. This is extremely time critical.
I presume you don't have a plane going down right now. You'll be fine,
and we'll do what we can to point you in the right direction.
Alex
Thanks,
Nelson Su
