On Thu, Jun 10, 2021 at 03:39:35PM +0300, Camelia Groza wrote: > From: Camelia Groza <[email protected]> > > The T2080RDB boards revision D and up have updated Aquantia PHYs on the > two 10Gbps copper ports connected to MAC1 and MAC2 (from AQ1202 to > AQR113C). The second PHY connected to MAC2 is located at a different > address on the MDIO bus compared to revision C boards. Device tree > fixups are required for both Linux and u-boot to set the correct PHY > address for the new board revisions. > > The first patch in the series implements a callback that detects the > board revision based on the CPLD registers. > > The second patch updates the PHY addresses in u-boot for the legacy, > non-DM, driver implementation.
I'd much rather see DM_ETH migration completed and non-DM_ETH code removed while someone is actively here again. Thanks! -- Tom
signature.asc
Description: PGP signature
