This series add DMA support for R5 SPL on J721e/J7200 SoCs post HSM
Rearch.
Depends on Tero's base HSM rearch support series.
v2:
Use IS_ENABLED() consistentially instead of #ifdef
Reword commit msg for 5/7 as suggested by Lokesh
Rebase on Tero's latest HSM base series.
Vignesh Raghavendra (7):
mailbox: k3-sec-proxy: Add DM to DMSC communication thread
firmware: ti_sci: Implement GET_RANGE with static data
firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.
ARM: dts: j72xx-r5-common-proc-board: Add DM firmware node
ARM: dts: k3: Add cfg register space for ringacc and udmap
soc: ti: k3-navss-ringacc: Add support for native configuration of
rings
dma: ti: k3-udma: Add support for native configuration of chan/flow
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 14 ++
.../k3-j7200-common-proc-board-u-boot.dtsi | 26 +++
.../arm/dts/k3-j7200-r5-common-proc-board.dts | 17 ++
.../k3-j721e-common-proc-board-u-boot.dtsi | 14 ++
.../arm/dts/k3-j721e-r5-common-proc-board.dts | 18 ++
.../firmware/ti,j721e-dm-sci.txt | 32 ++++
drivers/dma/ti/k3-udma-u-boot.c | 177 ++++++++++++++++++
drivers/dma/ti/k3-udma.c | 42 ++++-
drivers/firmware/ti_sci.c | 107 +++++++++++
drivers/firmware/ti_sci_static_data.h | 92 +++++++++
drivers/mailbox/k3-sec-proxy.c | 2 +-
drivers/soc/ti/k3-navss-ringacc-u-boot.c | 61 ++++++
drivers/soc/ti/k3-navss-ringacc.c | 36 +++-
13 files changed, 630 insertions(+), 8 deletions(-)
create mode 100644 doc/device-tree-bindings/firmware/ti,j721e-dm-sci.txt
create mode 100644 drivers/dma/ti/k3-udma-u-boot.c
create mode 100644 drivers/firmware/ti_sci_static_data.h
create mode 100644 drivers/soc/ti/k3-navss-ringacc-u-boot.c
--
2.31.1
