On Fri, 21 May 2021 10:11:47 -0400 Tom Rini <tr...@konsulko.com> wrote:
> On Thu, May 20, 2021 at 01:56:29PM -0500, Adam Ford wrote: > > On Thu, May 20, 2021 at 6:25 AM Marek Behún <marek.be...@nic.cz> > > wrote: > > > > > > Enable LTO for some boards that were tested by people on U-Boot > > > Mailing List. > > > > > > Signed-off-by: Marek Behún <marek.be...@nic.cz> > > > Tested-by: Adam Ford <aford...@gmail.com> > > > Tested-by: Pali Rohár <p...@kernel.org> > > > Tested-by: Tim Harvey <thar...@gateworks.com> > > > > Since the imx8mm beacon boards and the imx8mm venice board both show > > promise, does it make sense to 'imply' the LTO for anything enabling > > imx8mm? > > Same thing for the various omap3 boards, and potentially the renesas > > RZ/G2 boards. I know Tom went through to remove a bunch of boards > > that were never converted to DM. Most of the boards remaining > > boards have minimal board files and most of code is common to other > > boards in the same platforms. > > > > I have an l138_lcdk that I can use to test which I expect to be > > similar to the da850evm. > > As much as I am eager to move everything, quickly, over to LTO by > default, I think the problems that we've seen thus far show it's best > to really make it an explicit enable per board at least for the first > release or two. Once we've hopefully gotten more boards tested and > enabled we can see what makes sense for defaults, give a release worth > of heads up, and then go. >
