Hi Tom,
please pull the next batch of Marvell Armada related patches. Here the
summary log:
----------------------------------------------------------------
- Add base support for Marvell OcteonTX2 CN9130 DB (mostly done
by Kostya)
- Sync Armada mvpp2 ethernet driver with Marvell version (misc Marvell
authors)
- Sync Armada 8k MMU setup with Marvell version (misc Marvell
authors)
- spi: kirkwood: Some fixes especially for baudrate generation
(misc Marvell authors)
- mvebu: x530: Reduce SPL image size (Stefan)
- Rename "rx_training" to "mvebu_comphy_rx_training" (Stefan)
----------------------------------------------------------------
Here the Azure build:
https://dev.azure.com/sr0718/u-boot/_build/results?buildId=87&view=results
It shows some issues with xilinx_versal_virt, which seem to be not
related to this patch set and also occurred yesterday.
Thanks,
Stefan
The following changes since commit ea184cbff99ea1d82dcf94c95afe054e95da5069:
Merge tag 'ti-v2021.07-rc3' of
https://source.denx.de/u-boot/custodians/u-boot-ti (2021-05-12 10:07:21
-0400)
are available in the Git repository at:
g...@source.denx.de:u-boot/custodians/u-boot-marvell.git
for you to fetch changes up to e0a6df9efa69bfe662def66d12b8702ad1cf3a51:
arm: octeontx2: Add Octeon TX2 CN913x DB support (2021-05-13 08:18:19
+0200)
----------------------------------------------------------------
Ben Peled (3):
net: mvpp2: AN Bypass in 1000 and 2500 basex mode
net: mvpp2: remove unused define MVPP22_SMI_PHY_ADDR_REG
net: mvpp2: fix missing switch case break
Grzegorz Jaszczyk (4):
spi: kirkwood: prevent limiting speed to 0
arm64: mvebu: do not map firmware RT service region
arm64: mvebu: a8k: move firmware related definitions to fw info
arm64: mvebu: extend the mmio region
Ken Ma (1):
spi: kirkwood: support extended baud rates
Konstantin Porotchkin (2):
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
arm: octeontx2: Add Octeon TX2 CN913x DB support
Marcin Wojtas (4):
net: mvpp2: remove redundant SMI address configuration
net: mvpp2: add explicit sgmii-2500 support
spi: kirkwood: prevent configuring speed exceeding max controller
freq
pcie: designware: mvebu: do not configure ATU for IO when not used
Stefan Chulski (5):
phy: introduce 1000BaseX and 2500BaseX modes
net: mvpp2: add CP115 port1 10G/5G SFI support
net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support
net: mvpp2: Fix 2.5G GMII_SPEED configurations
net: mvpp2: allow MDIO registration for fixed links
Stefan Roese (2):
mvebu: x530: Reduce SPL image size
cmd: mvebu: Rename rx_training to mvebu_comphy_rx_training
jinghua (1):
arm64: mvebu: a8k: align memory regions
arch/arm/dts/Makefile | 6 +
arch/arm/dts/cn9130-db-A.dts | 55 ++++
arch/arm/dts/cn9130-db-B.dts | 51 ++++
arch/arm/dts/cn9130-db-dev-info.dtsi | 44 +++
arch/arm/dts/cn9130-db.dtsi | 316
++++++++++++++++++++++
arch/arm/dts/cn9131-db-A.dts | 54 ++++
arch/arm/dts/cn9131-db-B.dts | 69 +++++
arch/arm/dts/cn9131-db.dtsi | 166 ++++++++++++
arch/arm/dts/cn9132-db-A.dts | 13 +
arch/arm/dts/cn9132-db-B.dts | 13 +
arch/arm/dts/cn9132-db.dtsi | 217 +++++++++++++++
arch/arm/mach-mvebu/armada8k/cpu.c | 70 ++---
arch/arm/mach-mvebu/include/mach/fw_info.h | 18 ++
board/Marvell/octeontx2_cn913x/MAINTAINERS | 1 +
board/Marvell/octeontx2_cn913x/README | 24 ++
cmd/mvebu/Kconfig | 9 +-
cmd/mvebu/Makefile | 2 +-
cmd/mvebu/{rx_training.c => comphy_rx_training.c} | 10 +-
configs/mvebu_db_cn9130_defconfig | 89 ++++++
configs/x530_defconfig | 2 +-
drivers/net/mvpp2.c | 257 +++++++++++-------
drivers/pci/pcie_dw_mvebu.c | 37 ++-
drivers/spi/kirkwood_spi.c | 67 ++++-
include/phy_interface.h | 4 +
24 files changed, 1413 insertions(+), 181 deletions(-)
create mode 100644 arch/arm/dts/cn9130-db-A.dts
create mode 100644 arch/arm/dts/cn9130-db-B.dts
create mode 100644 arch/arm/dts/cn9130-db-dev-info.dtsi
create mode 100644 arch/arm/dts/cn9130-db.dtsi
create mode 100644 arch/arm/dts/cn9131-db-A.dts
create mode 100644 arch/arm/dts/cn9131-db-B.dts
create mode 100644 arch/arm/dts/cn9131-db.dtsi
create mode 100644 arch/arm/dts/cn9132-db-A.dts
create mode 100644 arch/arm/dts/cn9132-db-B.dts
create mode 100644 arch/arm/dts/cn9132-db.dtsi
create mode 100644 arch/arm/mach-mvebu/include/mach/fw_info.h
create mode 100644 board/Marvell/octeontx2_cn913x/README
rename cmd/mvebu/{rx_training.c => comphy_rx_training.c} (74%)
create mode 100644 configs/mvebu_db_cn9130_defconfig
