(resending to the list after subscribing) Hi,
On Thu, Apr 22, 2021 at 10:15 AM Green Wan <[email protected]> wrote: > > Add fu740 support. One abstract layer is added for supporting > multiple chips such as fu540 and fu740. > > Signed-off-by: Green Wan <[email protected]> > --- > drivers/clk/sifive/Kconfig | 8 +- > drivers/clk/sifive/Makefile | 4 +- > drivers/clk/sifive/fu540-prci.c | 769 +------------------------------ > drivers/clk/sifive/fu540-prci.h | 22 + > drivers/clk/sifive/fu740-prci.c | 158 +++++++ > drivers/clk/sifive/fu740-prci.h | 22 + > drivers/clk/sifive/sifive-prci.c | 733 +++++++++++++++++++++++++++++ > drivers/clk/sifive/sifive-prci.h | 323 +++++++++++++ > 8 files changed, 1286 insertions(+), 753 deletions(-) > create mode 100644 drivers/clk/sifive/fu540-prci.h > create mode 100644 drivers/clk/sifive/fu740-prci.c > create mode 100644 drivers/clk/sifive/fu740-prci.h > create mode 100644 drivers/clk/sifive/sifive-prci.c > create mode 100644 drivers/clk/sifive/sifive-prci.h > > diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig > index c4d0a1f9b1..20fc004b59 100644 > --- a/drivers/clk/sifive/Kconfig > +++ b/drivers/clk/sifive/Kconfig > @@ -6,11 +6,11 @@ config CLK_SIFIVE > help > SoC drivers for SiFive Linux-capable SoCs. > > -config CLK_SIFIVE_FU540_PRCI > - bool "PRCI driver for SiFive FU540 SoCs" > +config CLK_SIFIVE_PRCI > + bool "PRCI driver for SiFive SoCs" > depends on CLK_SIFIVE Since the above is done in this patch, I would expect to remove all references to the CLK_SIFIVE_FU540_PRCI config option at the same time. Specifically: $ git grep CLK_SIFIVE_FU540_PRCI arch/riscv/cpu/fu540/Kconfig: imply CLK_SIFIVE_FU540_PRCI drivers/reset/Kconfig: depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_UNLEASHED If above references were fixed, it remove the need to manually add "CONFIG_CLK_SIFIVE_PRCI=y" to unleashed config in the "board: sifive: add HiFive Unmatched board support" patch. Leaving left over references to the removed config options is confusing, and makes the patch not self contained. > select CLK_ANALOGBITS_WRPLL_CLN28HPC > help > Supports the Power Reset Clock interface (PRCI) IP block found in > - FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, > - enable this driver. > + FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/ > + FU740 SoCs, enable this driver. > diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile > index b224279afb..51348b1ddc 100644 > --- a/drivers/clk/sifive/Makefile > +++ b/drivers/clk/sifive/Makefile > @@ -1,3 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0+ > > -obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o > +obj-y += sifive-prci.o > + > +obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o fu740-prci.o > diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c > index b3882d0b77..ceb2c6fab0 100644 > --- a/drivers/clk/sifive/fu540-prci.c > +++ b/drivers/clk/sifive/fu540-prci.c > @@ -5,6 +5,8 @@ > * Copyright (C) 2018 SiFive, Inc. > * Wesley Terpstra > * Paul Walmsley > + * Zong Li > + * Pragnesh Patel > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > @@ -15,632 +17,48 @@ > * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > * GNU General Public License for more details. > * > - * The FU540 PRCI implements clock and reset control for the SiFive > - * FU540-C000 chip. This driver assumes that it has sole control > - * over all PRCI resources. > - * > - * This driver is based on the PRCI driver written by Wesley Terpstra. > - * > - * Refer, commit 999529edf517ed75b56659d456d221b2ee56bb60 of: > - * https://github.com/riscv/riscv-linux > - * > * References: > * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset" > */ > > -#include <common.h> > -#include <clk-uclass.h> > -#include <clk.h> > -#include <div64.h> > -#include <dm.h> > -#include <dm/device.h> > -#include <dm/device_compat.h> > -#include <dm/uclass.h> > #include <dt-bindings/clock/sifive-fu540-prci.h> > -#include <dt-bindings/reset/sifive-fu540-prci.h> > -#include <errno.h> > -#include <reset-uclass.h> > -#include <asm/io.h> > -#include <asm/arch/reset.h> > -#include <linux/delay.h> > -#include <linux/err.h> > -#include <linux/math64.h> > -#include <linux/clk/analogbits-wrpll-cln28hpc.h> > - > -/* > - * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects: > - * hfclk and rtcclk > - */ > -#define EXPECTED_CLK_PARENT_COUNT 2 > - > -/* > - * Register offsets and bitmasks > - */ > - > -/* COREPLLCFG0 */ > -#define PRCI_COREPLLCFG0_OFFSET 0x4 > -#define PRCI_COREPLLCFG0_DIVR_SHIFT 0 > -#define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT) > -#define PRCI_COREPLLCFG0_DIVF_SHIFT 6 > -#define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT) > -#define PRCI_COREPLLCFG0_DIVQ_SHIFT 15 > -#define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT) > -#define PRCI_COREPLLCFG0_RANGE_SHIFT 18 > -#define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT) > -#define PRCI_COREPLLCFG0_BYPASS_SHIFT 24 > -#define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT) > -#define PRCI_COREPLLCFG0_FSE_SHIFT 25 > -#define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT) > -#define PRCI_COREPLLCFG0_LOCK_SHIFT 31 > -#define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT) > - > -/* COREPLLCFG1 */ > -#define PRCI_COREPLLCFG1_OFFSET 0x8 > -#define PRCI_COREPLLCFG1_CKE_SHIFT 31 > -#define PRCI_COREPLLCFG1_CKE_MASK (0x1 << PRCI_COREPLLCFG1_CKE_SHIFT) > - > -/* DDRPLLCFG0 */ > -#define PRCI_DDRPLLCFG0_OFFSET 0xc > -#define PRCI_DDRPLLCFG0_DIVR_SHIFT 0 > -#define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT) > -#define PRCI_DDRPLLCFG0_DIVF_SHIFT 6 > -#define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT) > -#define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15 > -#define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT) > -#define PRCI_DDRPLLCFG0_RANGE_SHIFT 18 > -#define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT) > -#define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24 > -#define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT) > -#define PRCI_DDRPLLCFG0_FSE_SHIFT 25 > -#define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT) > -#define PRCI_DDRPLLCFG0_LOCK_SHIFT 31 > -#define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT) > - > -/* DDRPLLCFG1 */ > -#define PRCI_DDRPLLCFG1_OFFSET 0x10 > -#define PRCI_DDRPLLCFG1_CKE_SHIFT 31 > -#define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT) > - > -/* GEMGXLPLLCFG0 */ > -#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c > -#define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0 > -#define PRCI_GEMGXLPLLCFG0_DIVR_MASK \ > - (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT) > -#define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6 > -#define PRCI_GEMGXLPLLCFG0_DIVF_MASK \ > - (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT) > -#define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15 > -#define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT) > -#define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18 > -#define PRCI_GEMGXLPLLCFG0_RANGE_MASK \ > - (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT) > -#define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24 > -#define PRCI_GEMGXLPLLCFG0_BYPASS_MASK \ > - (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT) > -#define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25 > -#define PRCI_GEMGXLPLLCFG0_FSE_MASK \ > - (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT) > -#define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31 > -#define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT) > - > -/* GEMGXLPLLCFG1 */ > -#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20 > -#define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 31 > -#define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT) > - > -/* CORECLKSEL */ > -#define PRCI_CORECLKSEL_OFFSET 0x24 > -#define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0 > -#define PRCI_CORECLKSEL_CORECLKSEL_MASK \ > - (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT) > - > -/* DEVICESRESETREG */ > -#define PRCI_DEVICESRESETREG_OFFSET 0x28 > -#define PRCI_DEVICERESETCNT 5 > - > -#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK \ > - (0x1 << PRCI_RST_DDR_CTRL_N) > -#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK \ > - (0x1 << PRCI_RST_DDR_AXI_N) > -#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK \ > - (0x1 << PRCI_RST_DDR_AHB_N) > -#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK \ > - (0x1 << PRCI_RST_DDR_PHY_N) > -#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK \ > - (0x1 << PRCI_RST_GEMGXL_N) > - > -/* CLKMUXSTATUSREG */ > -#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c > -#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1 > -#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \ > - (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT) > - > -/* PROCMONCFG */ > -#define PRCI_PROCMONCFG_OFFSET 0xF0 > -#define PRCI_PROCMONCFG_CORE_CLOCK_SHIFT 24 > -#define PRCI_PROCMONCFG_CORE_CLOCK_MASK \ > - (0x1 << PRCI_PROCMONCFG_CORE_CLOCK_SHIFT) > - > -/* > - * Private structures > - */ > - > -/** > - * struct __prci_data - per-device-instance data > - * @va: base virtual address of the PRCI IP block > - * @parent: parent clk instance > - * > - * PRCI per-device instance data > - */ > -struct __prci_data { > - void *va; > - struct clk parent_hfclk; > - struct clk parent_rtcclk; > -}; > - > -/** > - * struct __prci_wrpll_data - WRPLL configuration and integration data > - * @c: WRPLL current configuration record > - * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else > NULL) > - * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL) > - * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base > address > - * @cfg1_offs: WRPLL CFG1 register offset (in bytes) from the PRCI base > address > - * @release_reset: fn ptr to code to release clock reset > - * > - * @enable_bypass and @disable_bypass are used for WRPLL instances > - * that contain a separate external glitchless clock mux downstream > - * from the PLL. The WRPLL internal bypass mux is not glitchless. > - */ > -struct __prci_wrpll_data { > - struct wrpll_cfg c; > - void (*enable_bypass)(struct __prci_data *pd); > - void (*disable_bypass)(struct __prci_data *pd); > - u8 cfg0_offs; > - u8 cfg1_offs; > - void (*release_reset)(struct __prci_data *pd); > -}; > - > -struct __prci_clock; > - > -/* struct __prci_clock_ops - clock operations */ > -struct __prci_clock_ops { > - int (*set_rate)(struct __prci_clock *pc, > - unsigned long rate, > - unsigned long parent_rate); > - unsigned long (*round_rate)(struct __prci_clock *pc, > - unsigned long rate, > - unsigned long *parent_rate); > - unsigned long (*recalc_rate)(struct __prci_clock *pc, > - unsigned long parent_rate); > - int (*enable_clk)(struct __prci_clock *pc, bool enable); > -}; > - > -/** > - * struct __prci_clock - describes a clock device managed by PRCI > - * @name: user-readable clock name string - should match the manual > - * @parent_name: parent name for this clock > - * @ops: struct __prci_clock_ops for control > - * @pwd: WRPLL-specific data, associated with this clock (if not NULL) > - * @pd: PRCI-specific data associated with this clock (if not NULL) > - * > - * PRCI clock data. Used by the PRCI driver to register PRCI-provided > - * clocks to the Linux clock infrastructure. > - */ > -struct __prci_clock { > - const char *name; > - const char *parent_name; > - const struct __prci_clock_ops *ops; > - struct __prci_wrpll_data *pwd; > - struct __prci_data *pd; > -}; > - > -/* > - * Private functions > - */ > - > -/** > - * __prci_readl() - read from a PRCI register > - * @pd: PRCI context > - * @offs: register offset to read from (in bytes, from PRCI base address) > - * > - * Read the register located at offset @offs from the base virtual > - * address of the PRCI register target described by @pd, and return > - * the value to the caller. > - * > - * Context: Any context. > - * > - * Return: the contents of the register described by @pd and @offs. > - */ > -static u32 __prci_readl(struct __prci_data *pd, u32 offs) > -{ > - return readl(pd->va + offs); > -} > - > -static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd) > -{ > - writel(v, pd->va + offs); > -} > - > -/* WRPLL-related private functions */ > - > -/** > - * __prci_wrpll_unpack() - unpack WRPLL configuration registers into > parameters > - * @c: ptr to a struct wrpll_cfg record to write config into > - * @r: value read from the PRCI PLL configuration register > - * > - * Given a value @r read from an FU540 PRCI PLL configuration register, > - * split it into fields and populate it into the WRPLL configuration record > - * pointed to by @c. > - * > - * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros > - * have the same register layout. > - * > - * Context: Any context. > - */ > -static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r) > -{ > - u32 v; > - > - v = r & PRCI_COREPLLCFG0_DIVR_MASK; > - v >>= PRCI_COREPLLCFG0_DIVR_SHIFT; > - c->divr = v; > - > - v = r & PRCI_COREPLLCFG0_DIVF_MASK; > - v >>= PRCI_COREPLLCFG0_DIVF_SHIFT; > - c->divf = v; > - > - v = r & PRCI_COREPLLCFG0_DIVQ_MASK; > - v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT; > - c->divq = v; > - > - v = r & PRCI_COREPLLCFG0_RANGE_MASK; > - v >>= PRCI_COREPLLCFG0_RANGE_SHIFT; > - c->range = v; > - > - c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK | > - WRPLL_FLAGS_EXT_FEEDBACK_MASK); > - > - /* external feedback mode not supported */ > - c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK; > -} > - > -/** > - * __prci_wrpll_pack() - pack PLL configuration parameters into a register > value > - * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg > - * > - * Using a set of WRPLL configuration values pointed to by @c, > - * assemble a PRCI PLL configuration register value, and return it to > - * the caller. > - * > - * Context: Any context. Caller must ensure that the contents of the > - * record pointed to by @c do not change during the execution > - * of this function. > - * > - * Returns: a value suitable for writing into a PRCI PLL configuration > - * register > - */ > -static u32 __prci_wrpll_pack(const struct wrpll_cfg *c) > -{ > - u32 r = 0; > - > - r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT; > - r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT; > - r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT; > - r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT; > - > - /* external feedback mode not supported */ > - r |= PRCI_COREPLLCFG0_FSE_MASK; > - > - return r; > -} > - > -/** > - * __prci_wrpll_read_cfg0() - read the WRPLL configuration from the PRCI > - * @pd: PRCI context > - * @pwd: PRCI WRPLL metadata > - * > - * Read the current configuration of the PLL identified by @pwd from > - * the PRCI identified by @pd, and store it into the local configuration > - * cache in @pwd. > - * > - * Context: Any context. Caller must prevent the records pointed to by > - * @pd and @pwd from changing during execution. > - */ > -static void __prci_wrpll_read_cfg0(struct __prci_data *pd, > - struct __prci_wrpll_data *pwd) > -{ > - __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs)); > -} > - > -/** > - * __prci_wrpll_write_cfg0() - write WRPLL configuration into the PRCI > - * @pd: PRCI context > - * @pwd: PRCI WRPLL metadata > - * @c: WRPLL configuration record to write > - * > - * Write the WRPLL configuration described by @c into the WRPLL > - * configuration register identified by @pwd in the PRCI instance > - * described by @c. Make a cached copy of the WRPLL's current > - * configuration so it can be used by other code. > - * > - * Context: Any context. Caller must prevent the records pointed to by > - * @pd and @pwd from changing during execution. > - */ > -static void __prci_wrpll_write_cfg0(struct __prci_data *pd, > - struct __prci_wrpll_data *pwd, > - struct wrpll_cfg *c) > -{ > - __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd); > - > - memcpy(&pwd->c, c, sizeof(*c)); > -} > - > -/** > - * __prci_wrpll_write_cfg1() - write Clock enable/disable configuration > - * into the PRCI > - * @pd: PRCI context > - * @pwd: PRCI WRPLL metadata > - * @enable: Clock enable or disable value > - */ > -static void __prci_wrpll_write_cfg1(struct __prci_data *pd, > - struct __prci_wrpll_data *pwd, > - u32 enable) > -{ > - __prci_writel(enable, pwd->cfg1_offs, pd); > -} > - > -/* Core clock mux control */ > - > -/** > - * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK > - * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg > - * > - * Switch the CORECLK mux to the HFCLK input source; return once complete. > - * > - * Context: Any context. Caller must prevent concurrent changes to the > - * PRCI_CORECLKSEL_OFFSET register. > - */ > -static void __prci_coreclksel_use_hfclk(struct __prci_data *pd) > -{ > - u32 r; > - > - r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); > - r |= PRCI_CORECLKSEL_CORECLKSEL_MASK; > - __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); > - > - r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ > -} > - > -/** > - * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL > - * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg > - * > - * Switch the CORECLK mux to the PLL output clock; return once complete. > - * > - * Context: Any context. Caller must prevent concurrent changes to the > - * PRCI_CORECLKSEL_OFFSET register. > - */ > -static void __prci_coreclksel_use_corepll(struct __prci_data *pd) > -{ > - u32 r; > - > - r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); > - r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; > - __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); > - > - r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ > -} > - > -static unsigned long sifive_fu540_prci_wrpll_recalc_rate( > - struct __prci_clock *pc, > - unsigned long parent_rate) > -{ > - struct __prci_wrpll_data *pwd = pc->pwd; > > - return wrpll_calc_output_rate(&pwd->c, parent_rate); > -} > - > -static unsigned long sifive_fu540_prci_wrpll_round_rate( > - struct __prci_clock *pc, > - unsigned long rate, > - unsigned long *parent_rate) > -{ > - struct __prci_wrpll_data *pwd = pc->pwd; > - struct wrpll_cfg c; > - > - memcpy(&c, &pwd->c, sizeof(c)); > - > - wrpll_configure_for_rate(&c, rate, *parent_rate); > - > - return wrpll_calc_output_rate(&c, *parent_rate); > -} > - > -static int sifive_fu540_prci_wrpll_set_rate(struct __prci_clock *pc, > - unsigned long rate, > - unsigned long parent_rate) > -{ > - struct __prci_wrpll_data *pwd = pc->pwd; > - struct __prci_data *pd = pc->pd; > - int r; > - > - r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate); > - if (r) > - return r; > - > - if (pwd->enable_bypass) > - pwd->enable_bypass(pd); > - > - __prci_wrpll_write_cfg0(pd, pwd, &pwd->c); > - > - udelay(wrpll_calc_max_lock_us(&pwd->c)); > - > - if (pwd->disable_bypass) > - pwd->disable_bypass(pd); > - > - return 0; > -} > - > -static int sifive_fu540_prci_clock_enable(struct __prci_clock *pc, bool > enable) > -{ > - struct __prci_wrpll_data *pwd = pc->pwd; > - struct __prci_data *pd = pc->pd; > - > - if (enable) { > - __prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK); > - > - if (pwd->release_reset) > - pwd->release_reset(pd); > - } else { > - u32 r; > - > - r = __prci_readl(pd, pwd->cfg1_offs); > - r &= ~PRCI_COREPLLCFG1_CKE_MASK; > - > - __prci_wrpll_write_cfg1(pd, pwd, r); > - } > - > - return 0; > -} > - > -static const struct __prci_clock_ops sifive_fu540_prci_wrpll_clk_ops = { > - .set_rate = sifive_fu540_prci_wrpll_set_rate, > - .round_rate = sifive_fu540_prci_wrpll_round_rate, > - .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate, > - .enable_clk = sifive_fu540_prci_clock_enable, > -}; > - > -/* TLCLKSEL clock integration */ > - > -static unsigned long sifive_fu540_prci_tlclksel_recalc_rate( > - struct __prci_clock *pc, > - unsigned long parent_rate) > -{ > - struct __prci_data *pd = pc->pd; > - u32 v; > - u8 div; > - > - v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET); > - v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK; > - div = v ? 1 : 2; > - > - return div_u64(parent_rate, div); > -} > - > -static const struct __prci_clock_ops sifive_fu540_prci_tlclksel_clk_ops = { > - .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate, > -}; > - > -static int __prci_consumer_reset(const char *rst_name, bool trigger) > -{ > - struct udevice *dev; > - struct reset_ctl rst_sig; > - int ret; > - > - ret = uclass_get_device_by_driver(UCLASS_RESET, > - DM_DRIVER_GET(sifive_reset), > - &dev); > - if (ret) { > - dev_err(dev, "Reset driver not found: %d\n", ret); > - return ret; > - } > - > - ret = reset_get_by_name(dev, rst_name, &rst_sig); > - if (ret) { > - dev_err(dev, "failed to get %s reset\n", rst_name); > - return ret; > - } > - > - if (reset_valid(&rst_sig)) { > - if (trigger) > - ret = reset_deassert(&rst_sig); > - else > - ret = reset_assert(&rst_sig); > - if (ret) { > - dev_err(dev, "failed to trigger reset id = %ld\n", > - rst_sig.id); > - return ret; > - } > - } > - > - return ret; > -} > - > -/** > - * __prci_ddr_release_reset() - Release DDR reset > - * @pd: struct __prci_data * for the PRCI containing the DDRCLK mux reg > - * > - */ > -static void __prci_ddr_release_reset(struct __prci_data *pd) > -{ > - /* Release DDR ctrl reset */ > - __prci_consumer_reset("ddr_ctrl", true); > - > - /* HACK to get the '1 full controller clock cycle'. */ > - asm volatile ("fence"); > - > - /* Release DDR AXI reset */ > - __prci_consumer_reset("ddr_axi", true); > - > - /* Release DDR AHB reset */ > - __prci_consumer_reset("ddr_ahb", true); > - > - /* Release DDR PHY reset */ > - __prci_consumer_reset("ddr_phy", true); > - > - /* HACK to get the '1 full controller clock cycle'. */ > - asm volatile ("fence"); > - > - /* > - * These take like 16 cycles to actually propagate. We can't go > sending > - * stuff before they come out of reset. So wait. > - */ > - for (int i = 0; i < 256; i++) > - asm volatile ("nop"); > -} > - > -/** > - * __prci_ethernet_release_reset() - Release ethernet reset > - * @pd: struct __prci_data * for the PRCI containing the Ethernet CLK mux reg > - * > - */ > -static void __prci_ethernet_release_reset(struct __prci_data *pd) > -{ > - /* Release GEMGXL reset */ > - __prci_consumer_reset("gemgxl_reset", true); > - > - /* Procmon => core clock */ > - __prci_writel(PRCI_PROCMONCFG_CORE_CLOCK_MASK, PRCI_PROCMONCFG_OFFSET, > - pd); > -} > - > -/* > - * PRCI integration data for each WRPLL instance > - */ > +#include "sifive-prci.h" > > +/* PRCI integration data for each WRPLL instance */ > static struct __prci_wrpll_data __prci_corepll_data = { > .cfg0_offs = PRCI_COREPLLCFG0_OFFSET, > .cfg1_offs = PRCI_COREPLLCFG1_OFFSET, > - .enable_bypass = __prci_coreclksel_use_hfclk, > - .disable_bypass = __prci_coreclksel_use_corepll, > + .enable_bypass = sifive_prci_coreclksel_use_hfclk, > + .disable_bypass = sifive_prci_coreclksel_use_corepll, > }; > > static struct __prci_wrpll_data __prci_ddrpll_data = { > .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET, > .cfg1_offs = PRCI_DDRPLLCFG1_OFFSET, > - .release_reset = __prci_ddr_release_reset, > + .release_reset = sifive_prci_ddr_release_reset, > }; > > static struct __prci_wrpll_data __prci_gemgxlpll_data = { > .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET, > .cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET, > - .release_reset = __prci_ethernet_release_reset, > + .release_reset = sifive_prci_ethernet_release_reset, > }; > > -/* > - * List of clock controls provided by the PRCI > - */ > +/* Linux clock framework integration */ > +static const struct __prci_clock_ops sifive_fu540_prci_wrpll_clk_ops = { > + .set_rate = sifive_prci_wrpll_set_rate, > + .round_rate = sifive_prci_wrpll_round_rate, > + .recalc_rate = sifive_prci_wrpll_recalc_rate, > + .enable_clk = sifive_prci_clock_enable, > +}; > > -static struct __prci_clock __prci_init_clocks[] = { > +static const struct __prci_clock_ops sifive_fu540_prci_tlclksel_clk_ops = { > + .recalc_rate = sifive_prci_tlclksel_recalc_rate, > +}; > + > +/* List of clock controls provided by the PRCI */ > +struct __prci_clock __prci_init_clocks_fu540[] = { > [PRCI_CLK_COREPLL] = { > .name = "corepll", > .parent_name = "hfclk", > @@ -665,148 +83,3 @@ static struct __prci_clock __prci_init_clocks[] = { > .ops = &sifive_fu540_prci_tlclksel_clk_ops, > }, > }; > - > -static ulong sifive_fu540_prci_parent_rate(struct __prci_clock *pc) > -{ > - ulong parent_rate; > - struct __prci_clock *p; > - > - if (strcmp(pc->parent_name, "corepll") == 0) { > - p = &__prci_init_clocks[PRCI_CLK_COREPLL]; > - if (!p->pd || !p->ops->recalc_rate) > - return -ENXIO; > - > - return p->ops->recalc_rate(p, > sifive_fu540_prci_parent_rate(p)); > - } > - > - if (strcmp(pc->parent_name, "rtcclk") == 0) > - parent_rate = clk_get_rate(&pc->pd->parent_rtcclk); > - else > - parent_rate = clk_get_rate(&pc->pd->parent_hfclk); > - > - return parent_rate; > -} > - > -static ulong sifive_fu540_prci_get_rate(struct clk *clk) > -{ > - struct __prci_clock *pc; > - > - if (ARRAY_SIZE(__prci_init_clocks) <= clk->id) > - return -ENXIO; > - > - pc = &__prci_init_clocks[clk->id]; > - if (!pc->pd || !pc->ops->recalc_rate) > - return -ENXIO; > - > - return pc->ops->recalc_rate(pc, sifive_fu540_prci_parent_rate(pc)); > -} > - > -static ulong sifive_fu540_prci_set_rate(struct clk *clk, ulong rate) > -{ > - int err; > - struct __prci_clock *pc; > - > - if (ARRAY_SIZE(__prci_init_clocks) <= clk->id) > - return -ENXIO; > - > - pc = &__prci_init_clocks[clk->id]; > - if (!pc->pd || !pc->ops->set_rate) > - return -ENXIO; > - > - err = pc->ops->set_rate(pc, rate, sifive_fu540_prci_parent_rate(pc)); > - if (err) > - return err; > - > - return rate; > -} > - > -static int sifive_fu540_prci_enable(struct clk *clk) > -{ > - struct __prci_clock *pc; > - int ret = 0; > - > - if (ARRAY_SIZE(__prci_init_clocks) <= clk->id) > - return -ENXIO; > - > - pc = &__prci_init_clocks[clk->id]; > - if (!pc->pd) > - return -ENXIO; > - > - if (pc->ops->enable_clk) > - ret = pc->ops->enable_clk(pc, 1); > - > - return ret; > -} > - > -static int sifive_fu540_prci_disable(struct clk *clk) > -{ > - struct __prci_clock *pc; > - int ret = 0; > - > - if (ARRAY_SIZE(__prci_init_clocks) <= clk->id) > - return -ENXIO; > - > - pc = &__prci_init_clocks[clk->id]; > - if (!pc->pd) > - return -ENXIO; > - > - if (pc->ops->enable_clk) > - ret = pc->ops->enable_clk(pc, 0); > - > - return ret; > -} > - > -static int sifive_fu540_prci_probe(struct udevice *dev) > -{ > - int i, err; > - struct __prci_clock *pc; > - struct __prci_data *pd = dev_get_priv(dev); > - > - pd->va = (void *)dev_read_addr(dev); > - if (IS_ERR(pd->va)) > - return PTR_ERR(pd->va); > - > - err = clk_get_by_index(dev, 0, &pd->parent_hfclk); > - if (err) > - return err; > - > - err = clk_get_by_index(dev, 1, &pd->parent_rtcclk); > - if (err) > - return err; > - > - for (i = 0; i < ARRAY_SIZE(__prci_init_clocks); ++i) { > - pc = &__prci_init_clocks[i]; > - pc->pd = pd; > - if (pc->pwd) > - __prci_wrpll_read_cfg0(pd, pc->pwd); > - } > - > - return 0; > -} > - > -static struct clk_ops sifive_fu540_prci_ops = { > - .set_rate = sifive_fu540_prci_set_rate, > - .get_rate = sifive_fu540_prci_get_rate, > - .enable = sifive_fu540_prci_enable, > - .disable = sifive_fu540_prci_disable, > -}; > - > -static int sifive_fu540_clk_bind(struct udevice *dev) > -{ > - return sifive_reset_bind(dev, PRCI_DEVICERESETCNT); > -} > - > -static const struct udevice_id sifive_fu540_prci_ids[] = { > - { .compatible = "sifive,fu540-c000-prci" }, > - { } > -}; > - > -U_BOOT_DRIVER(sifive_fu540_prci) = { > - .name = "sifive-fu540-prci", > - .id = UCLASS_CLK, > - .of_match = sifive_fu540_prci_ids, > - .probe = sifive_fu540_prci_probe, > - .ops = &sifive_fu540_prci_ops, > - .priv_auto = sizeof(struct __prci_data), > - .bind = sifive_fu540_clk_bind, > -}; > diff --git a/drivers/clk/sifive/fu540-prci.h b/drivers/clk/sifive/fu540-prci.h > new file mode 100644 > index 0000000000..113301107d > --- /dev/null > +++ b/drivers/clk/sifive/fu540-prci.h > @@ -0,0 +1,22 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (C) 2020-2021 SiFive, Inc. > + * Zong Li > + * Pragnesh Patel > + */ > + > +#ifndef __SIFIVE_CLK_FU540_PRCI_H > +#define __SIFIVE_CLK_FU540_PRCI_H > + > +#include "sifive-prci.h" > + > +#define NUM_CLOCK_FU540 4 > + > +extern struct __prci_clock __prci_init_clocks_fu540[NUM_CLOCK_FU540]; > + > +static const struct prci_clk_desc prci_clk_fu540 = { > + .clks = __prci_init_clocks_fu540, > + .num_clks = ARRAY_SIZE(__prci_init_clocks_fu540), > +}; > + > +#endif /* __SIFIVE_CLK_FU540_PRCI_H */ > diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c > new file mode 100644 > index 0000000000..9a642c1c99 > --- /dev/null > +++ b/drivers/clk/sifive/fu740-prci.c > @@ -0,0 +1,158 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2018-2021 SiFive, Inc. > + * Wesley Terpstra > + * Paul Walmsley > + * Zong Li > + * Pragnesh Patel > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <dt-bindings/clock/sifive-fu740-prci.h> > +#include "sifive-prci.h" > +#include <asm/io.h> > + > +int sifive_prci_fu740_pciauxclk_enable(struct __prci_clock *pc, bool enable) > +{ > + struct __prci_wrpll_data *pwd = pc->pwd; > + struct __prci_data *pd = pc->pd; > + u32 v; > + > + if (pwd->cfg1_offs != PRCI_PCIEAUXCFG1_OFFSET) > + return -EINVAL; > + > + v = readl(pd->va + pwd->cfg1_offs); > + v = enable ? (v | PRCI_PCIEAUXCFG1_MASK) : (v & > ~PRCI_PCIEAUXCFG1_MASK); > + writel(v, pd->va + pwd->cfg1_offs); > + > + return 0; > +} > + > +/* PRCI integration data for each WRPLL instance */ > +static struct __prci_wrpll_data __prci_corepll_data = { > + .cfg0_offs = PRCI_COREPLLCFG0_OFFSET, > + .cfg1_offs = PRCI_COREPLLCFG1_OFFSET, > + .enable_bypass = sifive_prci_coreclksel_use_hfclk, > + .disable_bypass = sifive_prci_coreclksel_use_final_corepll, > +}; > + > +static struct __prci_wrpll_data __prci_ddrpll_data = { > + .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET, > + .cfg1_offs = PRCI_DDRPLLCFG1_OFFSET, > + .release_reset = sifive_prci_ddr_release_reset, > +}; > + > +static struct __prci_wrpll_data __prci_gemgxlpll_data = { > + .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET, > + .cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET, > + .release_reset = sifive_prci_ethernet_release_reset, > +}; > + > +static struct __prci_wrpll_data __prci_dvfscorepll_data = { > + .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET, > + .cfg1_offs = PRCI_DVFSCOREPLLCFG1_OFFSET, > + .enable_bypass = sifive_prci_corepllsel_use_corepll, > + .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll, > +}; > + > +static struct __prci_wrpll_data __prci_hfpclkpll_data = { > + .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET, > + .cfg1_offs = PRCI_HFPCLKPLLCFG1_OFFSET, > + .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk, > + .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll, > +}; > + > +static struct __prci_wrpll_data __prci_cltxpll_data = { > + .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET, > + .cfg1_offs = PRCI_CLTXPLLCFG1_OFFSET, > + .release_reset = sifive_prci_cltx_release_reset, > +}; > + > +static struct __prci_wrpll_data __prci_pcieaux_data = { > + .cfg1_offs = PRCI_PCIEAUXCFG1_OFFSET, > +}; > + > +/* Linux clock framework integration */ > + > +static const struct __prci_clock_ops sifive_fu740_prci_wrpll_clk_ops = { > + .set_rate = sifive_prci_wrpll_set_rate, > + .round_rate = sifive_prci_wrpll_round_rate, > + .recalc_rate = sifive_prci_wrpll_recalc_rate, > + .enable_clk = sifive_prci_clock_enable, > +}; > + > +static const struct __prci_clock_ops sifive_fu740_prci_tlclksel_clk_ops = { > + .recalc_rate = sifive_prci_tlclksel_recalc_rate, > +}; > + > +static const struct __prci_clock_ops sifive_fu740_prci_hfpclkplldiv_clk_ops > = { > + .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate, > +}; > + > +static const struct __prci_clock_ops sifive_fu740_prci_pcieaux_clk_ops = { > + .enable_clk = sifive_prci_fu740_pciauxclk_enable, > +}; > + > +/* List of clock controls provided by the PRCI */ > +struct __prci_clock __prci_init_clocks_fu740[] = { > + [PRCI_CLK_COREPLL] = { > + .name = "corepll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_corepll_data, > + }, > + [PRCI_CLK_DDRPLL] = { > + .name = "ddrpll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_ddrpll_data, > + }, > + [PRCI_CLK_GEMGXLPLL] = { > + .name = "gemgxlpll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_gemgxlpll_data, > + }, > + [PRCI_CLK_DVFSCOREPLL] = { > + .name = "dvfscorepll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_dvfscorepll_data, > + }, > + [PRCI_CLK_HFPCLKPLL] = { > + .name = "hfpclkpll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_hfpclkpll_data, > + }, > + [PRCI_CLK_CLTXPLL] = { > + .name = "cltxpll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_cltxpll_data, > + }, > + [PRCI_CLK_TLCLK] = { > + .name = "tlclk", > + .parent_name = "corepll", > + .ops = &sifive_fu740_prci_tlclksel_clk_ops, > + }, > + [PRCI_CLK_PCLK] = { > + .name = "pclk", > + .parent_name = "hfpclkpll", > + .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops, > + }, > + [PRCI_CLK_PCIEAUX] { > + .name = "pciaux", > + .parent_name = "", > + .ops = &sifive_fu740_prci_pcieaux_clk_ops, > + .pwd = &__prci_pcieaux_data, > + } > +}; > diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h > new file mode 100644 > index 0000000000..b74f078906 > --- /dev/null > +++ b/drivers/clk/sifive/fu740-prci.h > @@ -0,0 +1,22 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (C) 2020-2021 SiFive, Inc. > + * Zong Li > + * Pragnesh Patel > + */ > + > +#ifndef __SIFIVE_CLK_FU740_PRCI_H > +#define __SIFIVE_CLK_FU740_PRCI_H > + > +#include "sifive-prci.h" > + > +#define NUM_CLOCK_FU740 9 > + > +extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740]; > + > +static const struct prci_clk_desc prci_clk_fu740 = { > + .clks = __prci_init_clocks_fu740, > + .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740), > +}; > + > +#endif /* __SIFIVE_CLK_FU740_PRCI_H */ > diff --git a/drivers/clk/sifive/sifive-prci.c > b/drivers/clk/sifive/sifive-prci.c > new file mode 100644 > index 0000000000..cd1acb9442 > --- /dev/null > +++ b/drivers/clk/sifive/sifive-prci.c > @@ -0,0 +1,733 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2018-2021 SiFive, Inc. > + * Wesley Terpstra > + * Paul Walmsley > + * Zong Li > + * Pragnesh Patel > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * The PRCI implements clock and reset control for the SiFive chip. > + * This driver assumes that it has sole control over all PRCI resources. > + * > + * This driver is based on the PRCI driver written by Wesley Terpstra: > + * > https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60 > + */ > + > +#include <common.h> > +#include <clk-uclass.h> > +#include <clk.h> > +#include <dm.h> > +#include <dm/device_compat.h> > +#include <reset.h> > +#include <asm/io.h> > +#include <asm/arch/reset.h> > +#include <linux/delay.h> > +#include <linux/math64.h> > +#include <dt-bindings/clock/sifive-fu740-prci.h> > + > +#include "fu540-prci.h" > +#include "fu740-prci.h" > + > +/* > + * Private functions > + */ > + > +/** > + * __prci_readl() - read from a PRCI register > + * @pd: PRCI context > + * @offs: register offset to read from (in bytes, from PRCI base address) > + * > + * Read the register located at offset @offs from the base virtual > + * address of the PRCI register target described by @pd, and return > + * the value to the caller. > + * > + * Context: Any context. > + * > + * Return: the contents of the register described by @pd and @offs. > + */ > +static u32 __prci_readl(struct __prci_data *pd, u32 offs) > +{ > + return readl(pd->va + offs); > +} > + > +static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd) > +{ > + writel(v, pd->va + offs); > +} > + > +/* WRPLL-related private functions */ > + > +/** > + * __prci_wrpll_unpack() - unpack WRPLL configuration registers into > parameters > + * @c: ptr to a struct wrpll_cfg record to write config into > + * @r: value read from the PRCI PLL configuration register > + * > + * Given a value @r read from an FU540 PRCI PLL configuration register, > + * split it into fields and populate it into the WRPLL configuration record > + * pointed to by @c. > + * > + * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros > + * have the same register layout. > + * > + * Context: Any context. > + */ > +static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r) > +{ > + u32 v; > + > + v = r & PRCI_COREPLLCFG0_DIVR_MASK; > + v >>= PRCI_COREPLLCFG0_DIVR_SHIFT; > + c->divr = v; > + > + v = r & PRCI_COREPLLCFG0_DIVF_MASK; > + v >>= PRCI_COREPLLCFG0_DIVF_SHIFT; > + c->divf = v; > + > + v = r & PRCI_COREPLLCFG0_DIVQ_MASK; > + v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT; > + c->divq = v; > + > + v = r & PRCI_COREPLLCFG0_RANGE_MASK; > + v >>= PRCI_COREPLLCFG0_RANGE_SHIFT; > + c->range = v; > + > + c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK | > + WRPLL_FLAGS_EXT_FEEDBACK_MASK); > + > + /* external feedback mode not supported */ > + c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK; > +} > + > +/** > + * __prci_wrpll_pack() - pack PLL configuration parameters into a register > value > + * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg > + * > + * Using a set of WRPLL configuration values pointed to by @c, > + * assemble a PRCI PLL configuration register value, and return it to > + * the caller. > + * > + * Context: Any context. Caller must ensure that the contents of the > + * record pointed to by @c do not change during the execution > + * of this function. > + * > + * Returns: a value suitable for writing into a PRCI PLL configuration > + * register > + */ > +static u32 __prci_wrpll_pack(const struct wrpll_cfg *c) > +{ > + u32 r = 0; > + > + r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT; > + r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT; > + r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT; > + r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT; > + > + /* external feedback mode not supported */ > + r |= PRCI_COREPLLCFG0_FSE_MASK; > + > + return r; > +} > + > +/** > + * __prci_wrpll_read_cfg0() - read the WRPLL configuration from the PRCI > + * @pd: PRCI context > + * @pwd: PRCI WRPLL metadata > + * > + * Read the current configuration of the PLL identified by @pwd from > + * the PRCI identified by @pd, and store it into the local configuration > + * cache in @pwd. > + * > + * Context: Any context. Caller must prevent the records pointed to by > + * @pd and @pwd from changing during execution. > + */ > +static void __prci_wrpll_read_cfg0(struct __prci_data *pd, > + struct __prci_wrpll_data *pwd) > +{ > + __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs)); > +} > + > +/** > + * __prci_wrpll_write_cfg0() - write WRPLL configuration into the PRCI > + * @pd: PRCI context > + * @pwd: PRCI WRPLL metadata > + * @c: WRPLL configuration record to write > + * > + * Write the WRPLL configuration described by @c into the WRPLL > + * configuration register identified by @pwd in the PRCI instance > + * described by @c. Make a cached copy of the WRPLL's current > + * configuration so it can be used by other code. > + * > + * Context: Any context. Caller must prevent the records pointed to by > + * @pd and @pwd from changing during execution. > + */ > +static void __prci_wrpll_write_cfg0(struct __prci_data *pd, > + struct __prci_wrpll_data *pwd, > + struct wrpll_cfg *c) > +{ > + __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd); > + > + memcpy(&pwd->c, c, sizeof(*c)); > +} > + > +/** > + * __prci_wrpll_write_cfg1() - write Clock enable/disable configuration > + * into the PRCI > + * @pd: PRCI context > + * @pwd: PRCI WRPLL metadata > + * @enable: Clock enable or disable value > + */ > +static void __prci_wrpll_write_cfg1(struct __prci_data *pd, > + struct __prci_wrpll_data *pwd, > + u32 enable) > +{ > + __prci_writel(enable, pwd->cfg1_offs, pd); > +} > + > +unsigned long sifive_prci_wrpll_recalc_rate(struct __prci_clock *pc, > + unsigned long parent_rate) > +{ > + struct __prci_wrpll_data *pwd = pc->pwd; > + > + return wrpll_calc_output_rate(&pwd->c, parent_rate); > +} > + > +unsigned long sifive_prci_wrpll_round_rate(struct __prci_clock *pc, > + unsigned long rate, > + unsigned long *parent_rate) > +{ > + struct __prci_wrpll_data *pwd = pc->pwd; > + struct wrpll_cfg c; > + > + memcpy(&c, &pwd->c, sizeof(c)); > + > + wrpll_configure_for_rate(&c, rate, *parent_rate); > + > + return wrpll_calc_output_rate(&c, *parent_rate); > +} > + > +int sifive_prci_wrpll_set_rate(struct __prci_clock *pc, > + unsigned long rate, > + unsigned long parent_rate) > +{ > + struct __prci_wrpll_data *pwd = pc->pwd; > + struct __prci_data *pd = pc->pd; > + int r; > + > + r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate); > + if (r) > + return r; > + > + if (pwd->enable_bypass) > + pwd->enable_bypass(pd); > + > + __prci_wrpll_write_cfg0(pd, pwd, &pwd->c); > + > + udelay(wrpll_calc_max_lock_us(&pwd->c)); > + > + return 0; > +} > + > +int sifive_prci_clock_enable(struct __prci_clock *pc, bool enable) > +{ > + struct __prci_wrpll_data *pwd = pc->pwd; > + struct __prci_data *pd = pc->pd; > + > + if (enable) { > + __prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK); > + > + if (pwd->disable_bypass) > + pwd->disable_bypass(pd); > + > + if (pwd->release_reset) > + pwd->release_reset(pd); > + } else { > + u32 r; > + > + if (pwd->enable_bypass) > + pwd->enable_bypass(pd); > + > + r = __prci_readl(pd, pwd->cfg1_offs); > + r &= ~PRCI_COREPLLCFG1_CKE_MASK; > + > + __prci_wrpll_write_cfg1(pd, pwd, r); > + } > + > + return 0; > +} > + > +/* TLCLKSEL clock integration */ > + > +unsigned long sifive_prci_tlclksel_recalc_rate(struct __prci_clock *pc, > + unsigned long parent_rate) > +{ > + struct __prci_data *pd = pc->pd; > + u32 v; > + u8 div; > + > + v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET); > + v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK; > + div = v ? 1 : 2; > + > + return div_u64(parent_rate, div); > +} > + > +/* HFPCLK clock integration */ > + > +unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct __prci_clock *pc, > + unsigned long parent_rate) > +{ > + struct __prci_data *pd = pc->pd; > + u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET); > + > + return div_u64(parent_rate, div + 2); > +} > + > +/** > + * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to > output > + * FINAL_COREPLL > + * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg > + * > + * Switch the CORECLK mux to the final COREPLL output clock; return once > + * complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_CORECLKSEL_OFFSET register. > + */ > +void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); > + r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; > + __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to > + * output DVFS_COREPLL > + * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg > + * > + * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once > complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_COREPLLSEL_OFFSET register. > + */ > +void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); > + r |= PRCI_COREPLLSEL_COREPLLSEL_MASK; > + __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to > + * output COREPLL > + * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg > + * > + * Switch the COREPLL mux to the COREPLL output clock; return once complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_COREPLLSEL_OFFSET register. > + */ > +void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); > + r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK; > + __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to > + * output HFCLK > + * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg > + * > + * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_HFPCLKPLLSEL_OFFSET register. > + */ > +void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); > + r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK; > + __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to > + * output HFPCLKPLL > + * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg > + * > + * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once > complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_HFPCLKPLLSEL_OFFSET register. > + */ > +void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); > + r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK; > + __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */ > +} > + > +static int __prci_consumer_reset(const char *rst_name, bool trigger) > +{ > + struct udevice *dev; > + struct reset_ctl rst_sig; > + int ret; > + > + ret = uclass_get_device_by_driver(UCLASS_RESET, > + DM_DRIVER_GET(sifive_reset), > + &dev); > + if (ret) { > + dev_err(dev, "Reset driver not found: %d\n", ret); > + return ret; > + } > + > + ret = reset_get_by_name(dev, rst_name, &rst_sig); > + if (ret) { > + dev_err(dev, "failed to get %s reset\n", rst_name); > + return ret; > + } > + > + if (reset_valid(&rst_sig)) { > + if (trigger) > + ret = reset_deassert(&rst_sig); > + else > + ret = reset_assert(&rst_sig); > + if (ret) { > + dev_err(dev, "failed to trigger reset id = %ld\n", > + rst_sig.id); > + return ret; > + } > + } > + > + return ret; > +} > + > +/** > + * sifive_prci_ddr_release_reset() - Release DDR reset > + * @pd: struct __prci_data * for the PRCI containing the DDRCLK mux reg > + * > + */ > +void sifive_prci_ddr_release_reset(struct __prci_data *pd) > +{ > + /* Release DDR ctrl reset */ > + __prci_consumer_reset("ddr_ctrl", true); > + > + /* HACK to get the '1 full controller clock cycle'. */ > + asm volatile ("fence"); > + > + /* Release DDR AXI reset */ > + __prci_consumer_reset("ddr_axi", true); > + > + /* Release DDR AHB reset */ > + __prci_consumer_reset("ddr_ahb", true); > + > + /* Release DDR PHY reset */ > + __prci_consumer_reset("ddr_phy", true); > + > + /* HACK to get the '1 full controller clock cycle'. */ > + asm volatile ("fence"); > + > + /* > + * These take like 16 cycles to actually propagate. We can't go > sending > + * stuff before they come out of reset. So wait. > + */ > + for (int i = 0; i < 256; i++) > + asm volatile ("nop"); > +} > + > +/** > + * sifive_prci_ethernet_release_reset() - Release ethernet reset > + * @pd: struct __prci_data * for the PRCI containing the Ethernet CLK mux reg > + * > + */ > +void sifive_prci_ethernet_release_reset(struct __prci_data *pd) > +{ > + /* Release GEMGXL reset */ > + __prci_consumer_reset("gemgxl_reset", true); > + > + /* Procmon => core clock */ > + __prci_writel(PRCI_PROCMONCFG_CORE_CLOCK_MASK, PRCI_PROCMONCFG_OFFSET, > + pd); > + > + /* Release Chiplink reset */ > + __prci_consumer_reset("cltx_reset", true); > +} > + > +/** > + * sifive_prci_cltx_release_reset() - Release cltx reset > + * @pd: struct __prci_data * for the PRCI containing the Ethernet CLK mux reg > + * > + */ > +void sifive_prci_cltx_release_reset(struct __prci_data *pd) > +{ > + /* Release CLTX reset */ > + __prci_consumer_reset("cltx_reset", true); > +} > + > +/* Core clock mux control */ > + > +/** > + * sifive_prci_coreclksel_use_hfclk() - switch the CORECLK mux to output > HFCLK > + * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg > + * > + * Switch the CORECLK mux to the HFCLK input source; return once complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_CORECLKSEL_OFFSET register. > + */ > +void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); > + r |= PRCI_CORECLKSEL_CORECLKSEL_MASK; > + __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_coreclksel_use_corepll() - switch the CORECLK mux to output > COREPLL > + * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg > + * > + * Switch the CORECLK mux to the PLL output clock; return once complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_CORECLKSEL_OFFSET register. > + */ > +void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); > + r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; > + __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ > +} > + > +static ulong sifive_prci_parent_rate(struct __prci_clock *pc, struct > prci_clk_desc *data) > +{ > + ulong parent_rate; > + ulong i; > + struct __prci_clock *p; > + > + if (strcmp(pc->parent_name, "corepll") == 0 || > + strcmp(pc->parent_name, "hfpclkpll") == 0) { > + for (i = 0; i < data->num_clks; i++) { > + if (strcmp(pc->parent_name, data->clks[i].name) == 0) > + break; > + } > + > + if (i >= data->num_clks) > + return -ENXIO; > + > + p = &data->clks[i]; > + if (!p->pd || !p->ops->recalc_rate) > + return -ENXIO; > + > + return p->ops->recalc_rate(p, sifive_prci_parent_rate(p, > data)); > + } > + > + if (strcmp(pc->parent_name, "rtcclk") == 0) > + parent_rate = clk_get_rate(&pc->pd->parent_rtcclk); > + else > + parent_rate = clk_get_rate(&pc->pd->parent_hfclk); > + > + return parent_rate; > +} > + > +static ulong sifive_prci_get_rate(struct clk *clk) > +{ > + struct __prci_clock *pc; > + struct prci_clk_desc *data = > + (struct prci_clk_desc *)dev_get_driver_data(clk->dev); > + > + if (data->num_clks <= clk->id) > + return -ENXIO; > + > + pc = &data->clks[clk->id]; > + if (!pc->pd || !pc->ops->recalc_rate) > + return -ENXIO; > + > + return pc->ops->recalc_rate(pc, sifive_prci_parent_rate(pc, data)); > +} > + > +static ulong sifive_prci_set_rate(struct clk *clk, ulong rate) > +{ > + int err; > + struct __prci_clock *pc; > + struct prci_clk_desc *data = > + (struct prci_clk_desc *)dev_get_driver_data(clk->dev); > + > + if (data->num_clks <= clk->id) > + return -ENXIO; > + > + pc = &data->clks[clk->id]; > + if (!pc->pd || !pc->ops->set_rate) > + return -ENXIO; > + > + err = pc->ops->set_rate(pc, rate, sifive_prci_parent_rate(pc, data)); > + if (err) > + return err; > + > + return rate; > +} > + > +static int sifive_prci_enable(struct clk *clk) > +{ > + struct __prci_clock *pc; > + int ret = 0; > + struct prci_clk_desc *data = > + (struct prci_clk_desc *)dev_get_driver_data(clk->dev); > + > + if (data->num_clks <= clk->id) > + return -ENXIO; > + > + pc = &data->clks[clk->id]; > + if (!pc->pd) > + return -ENXIO; > + > + if (pc->ops->enable_clk) > + ret = pc->ops->enable_clk(pc, 1); > + > + return ret; > +} > + > +static int sifive_prci_disable(struct clk *clk) > +{ > + struct __prci_clock *pc; > + int ret = 0; > + struct prci_clk_desc *data = > + (struct prci_clk_desc *)dev_get_driver_data(clk->dev); > + > + if (data->num_clks <= clk->id) > + return -ENXIO; > + > + pc = &data->clks[clk->id]; > + if (!pc->pd) > + return -ENXIO; > + > + if (pc->ops->enable_clk) > + ret = pc->ops->enable_clk(pc, 0); > + > + return ret; > +} > + > +static int sifive_prci_probe(struct udevice *dev) > +{ > + int i, err; > + struct __prci_clock *pc; > + struct __prci_data *pd = dev_get_priv(dev); > + > + struct prci_clk_desc *data = > + (struct prci_clk_desc *)dev_get_driver_data(dev); > + > + pd->va = (void *)dev_read_addr(dev); > + if (IS_ERR(pd->va)) > + return PTR_ERR(pd->va); > + > + err = clk_get_by_index(dev, 0, &pd->parent_hfclk); > + if (err) > + return err; > + > + err = clk_get_by_index(dev, 1, &pd->parent_rtcclk); > + if (err) > + return err; > + > + for (i = 0; i < data->num_clks; ++i) { > + pc = &data->clks[i]; > + pc->pd = pd; > + if (pc->pwd) > + __prci_wrpll_read_cfg0(pd, pc->pwd); > + } > + > + if (IS_ENABLED(CONFIG_SPL_BUILD)) { > + if (device_is_compatible(dev, "sifive,fu740-c000-prci")) { > + u32 prci_pll_reg; > + unsigned long parent_rate; > + > + prci_pll_reg = readl(pd->va + PRCI_PRCIPLL_OFFSET); > + > + if (prci_pll_reg & PRCI_PRCIPLL_HFPCLKPLL) { > + /* > + * Only initialize the HFPCLK PLL. In this > + * case the design uses hfpclk to drive > + * Chiplink > + */ > + pc = &data->clks[PRCI_CLK_HFPCLKPLL]; > + parent_rate = sifive_prci_parent_rate(pc, > data); > + sifive_prci_wrpll_set_rate(pc, 260000000, > + parent_rate); > + pc->ops->enable_clk(pc, 1); > + } else if (prci_pll_reg & PRCI_PRCIPLL_CLTXPLL) { > + /* CLTX pll init */ > + pc = &data->clks[PRCI_CLK_CLTXPLL]; > + parent_rate = sifive_prci_parent_rate(pc, > data); > + sifive_prci_wrpll_set_rate(pc, 260000000, > + parent_rate); > + pc->ops->enable_clk(pc, 1); > + } > + } > + } > + > + return 0; > +} > + > +static struct clk_ops sifive_prci_ops = { > + .set_rate = sifive_prci_set_rate, > + .get_rate = sifive_prci_get_rate, > + .enable = sifive_prci_enable, > + .disable = sifive_prci_disable, > +}; > + > +static int sifive_clk_bind(struct udevice *dev) > +{ > + return sifive_reset_bind(dev, PRCI_DEVICERESETCNT); > +} > + > +static const struct udevice_id sifive_prci_ids[] = { > + { .compatible = "sifive,fu540-c000-prci", .data = > (ulong)&prci_clk_fu540 }, > + { .compatible = "sifive,fu740-c000-prci", .data = > (ulong)&prci_clk_fu740 }, > + { } > +}; > + > +U_BOOT_DRIVER(sifive_prci) = { > + .name = "sifive-prci", > + .id = UCLASS_CLK, > + .of_match = sifive_prci_ids, > + .probe = sifive_prci_probe, > + .ops = &sifive_prci_ops, > + .priv_auto = sizeof(struct __prci_data), > + .bind = sifive_clk_bind, > +}; > diff --git a/drivers/clk/sifive/sifive-prci.h > b/drivers/clk/sifive/sifive-prci.h > new file mode 100644 > index 0000000000..5ce33d6184 > --- /dev/null > +++ b/drivers/clk/sifive/sifive-prci.h > @@ -0,0 +1,323 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (C) 2020-2021 SiFive, Inc. > + * Wesley Terpstra > + * Paul Walmsley > + * Zong Li > + * Pragnesh Patel > + */ > + > +#ifndef __SIFIVE_CLK_SIFIVE_PRCI_H > +#define __SIFIVE_CLK_SIFIVE_PRCI_H > + > +#include <clk.h> > +#include <linux/clk/analogbits-wrpll-cln28hpc.h> > + > +/* > + * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects: > + * hfclk and rtcclk > + */ > +#define EXPECTED_CLK_PARENT_COUNT 2 > + > +/* > + * Register offsets and bitmasks > + */ > + > +/* COREPLLCFG0 */ > +#define PRCI_COREPLLCFG0_OFFSET 0x4 > +#define PRCI_COREPLLCFG0_DIVR_SHIFT 0 > +#define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT) > +#define PRCI_COREPLLCFG0_DIVF_SHIFT 6 > +#define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT) > +#define PRCI_COREPLLCFG0_DIVQ_SHIFT 15 > +#define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT) > +#define PRCI_COREPLLCFG0_RANGE_SHIFT 18 > +#define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT) > +#define PRCI_COREPLLCFG0_BYPASS_SHIFT 24 > +#define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT) > +#define PRCI_COREPLLCFG0_FSE_SHIFT 25 > +#define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT) > +#define PRCI_COREPLLCFG0_LOCK_SHIFT 31 > +#define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT) > + > +/* COREPLLCFG1 */ > +#define PRCI_COREPLLCFG1_OFFSET 0x8 > +#define PRCI_COREPLLCFG1_CKE_SHIFT 31 > +#define PRCI_COREPLLCFG1_CKE_MASK (0x1 << PRCI_COREPLLCFG1_CKE_SHIFT) > + > +/* DDRPLLCFG0 */ > +#define PRCI_DDRPLLCFG0_OFFSET 0xc > +#define PRCI_DDRPLLCFG0_DIVR_SHIFT 0 > +#define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT) > +#define PRCI_DDRPLLCFG0_DIVF_SHIFT 6 > +#define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT) > +#define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15 > +#define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT) > +#define PRCI_DDRPLLCFG0_RANGE_SHIFT 18 > +#define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT) > +#define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24 > +#define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT) > +#define PRCI_DDRPLLCFG0_FSE_SHIFT 25 > +#define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT) > +#define PRCI_DDRPLLCFG0_LOCK_SHIFT 31 > +#define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT) > + > +/* DDRPLLCFG1 */ > +#define PRCI_DDRPLLCFG1_OFFSET 0x10 > +#define PRCI_DDRPLLCFG1_CKE_SHIFT 31 > +#define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT) > + > +/* PCIEAUXCFG1 */ > +#define PRCI_PCIEAUXCFG1_OFFSET 0x14 > +#define PRCI_PCIEAUXCFG1_SHIFT 0 > +#define PRCI_PCIEAUXCFG1_MASK (0x1 << PRCI_PCIEAUXCFG1_SHIFT) > + > +/* GEMGXLPLLCFG0 */ > +#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c > +#define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0 > +#define PRCI_GEMGXLPLLCFG0_DIVR_MASK \ > + (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT) > +#define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6 > +#define PRCI_GEMGXLPLLCFG0_DIVF_MASK \ > + (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT) > +#define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15 > +#define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT) > +#define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18 > +#define PRCI_GEMGXLPLLCFG0_RANGE_MASK \ > + (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT) > +#define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24 > +#define PRCI_GEMGXLPLLCFG0_BYPASS_MASK \ > + (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT) > +#define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25 > +#define PRCI_GEMGXLPLLCFG0_FSE_MASK \ > + (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT) > +#define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31 > +#define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT) > + > +/* GEMGXLPLLCFG1 */ > +#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20 > +#define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 31 > +#define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT) > + > +/* CORECLKSEL */ > +#define PRCI_CORECLKSEL_OFFSET 0x24 > +#define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0 > +#define PRCI_CORECLKSEL_CORECLKSEL_MASK \ > + (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT) > + > +/* DEVICESRESETREG */ > +#define PRCI_DEVICESRESETREG_OFFSET 0x28 > +#define PRCI_DEVICERESETCNT 6 > + > +/* CLKMUXSTATUSREG */ > +#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c > +#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1 > +#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \ > + (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT) > + > +/* CLTXPLLCFG0 */ > +#define PRCI_CLTXPLLCFG0_OFFSET 0x30 > +#define PRCI_CLTXPLLCFG0_DIVR_SHIFT 0 > +#define PRCI_CLTXPLLCFG0_DIVR_MASK (0x3f << PRCI_CLTXPLLCFG0_DIVR_SHIFT) > +#define PRCI_CLTXPLLCFG0_DIVF_SHIFT 6 > +#define PRCI_CLTXPLLCFG0_DIVF_MASK (0x1ff << PRCI_CLTXPLLCFG0_DIVF_SHIFT) > +#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT 15 > +#define PRCI_CLTXPLLCFG0_DIVQ_MASK (0x7 << PRCI_CLTXPLLCFG0_DIVQ_SHIFT) > +#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18 > +#define PRCI_CLTXPLLCFG0_RANGE_MASK (0x7 << PRCI_CLTXPLLCFG0_RANGE_SHIFT) > +#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT 24 > +#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 << PRCI_CLTXPLLCFG0_BYPASS_SHIFT) > +#define PRCI_CLTXPLLCFG0_FSE_SHIFT 25 > +#define PRCI_CLTXPLLCFG0_FSE_MASK (0x1 << PRCI_CLTXPLLCFG0_FSE_SHIFT) > +#define PRCI_CLTXPLLCFG0_LOCK_SHIFT 31 > +#define PRCI_CLTXPLLCFG0_LOCK_MASK (0x1 << PRCI_CLTXPLLCFG0_LOCK_SHIFT) > + > +/* CLTXPLLCFG1 */ > +#define PRCI_CLTXPLLCFG1_OFFSET 0x34 > +#define PRCI_CLTXPLLCFG1_CKE_SHIFT 24 > +#define PRCI_CLTXPLLCFG1_CKE_MASK (0x1 << PRCI_CLTXPLLCFG1_CKE_SHIFT) > + > +/* DVFSCOREPLLCFG0 */ > +#define PRCI_DVFSCOREPLLCFG0_OFFSET 0x38 > + > +/* DVFSCOREPLLCFG1 */ > +#define PRCI_DVFSCOREPLLCFG1_OFFSET 0x3c > +#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT 24 > +#define PRCI_DVFSCOREPLLCFG1_CKE_MASK (0x1 << > PRCI_DVFSCOREPLLCFG1_CKE_SHIFT) > + > +/* COREPLLSEL */ > +#define PRCI_COREPLLSEL_OFFSET 0x40 > +#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT 0 > +#define PRCI_COREPLLSEL_COREPLLSEL_MASK \ > + (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT) > + > +/* HFPCLKPLLCFG0 */ > +#define PRCI_HFPCLKPLLCFG0_OFFSET 0x50 > +#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT 0 > +#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK \ > + (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT 6 > +#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK \ > + (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT 15 > +#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK \ > + (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT 18 > +#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK \ > + (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT 24 > +#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK \ > + (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT 25 > +#define PRCI_HFPCLKPLL_CFG0_FSE_MASK \ > + (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT 31 > +#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK \ > + (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT) > + > +/* HFPCLKPLLCFG1 */ > +#define PRCI_HFPCLKPLLCFG1_OFFSET 0x54 > +#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT 24 > +#define PRCI_HFPCLKPLLCFG1_CKE_MASK \ > + (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT) > + > +/* HFPCLKPLLSEL */ > +#define PRCI_HFPCLKPLLSEL_OFFSET 0x58 > +#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0 > +#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK \ > + (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT) > + > +/* HFPCLKPLLDIV */ > +#define PRCI_HFPCLKPLLDIV_OFFSET 0x5c > + > +/* PRCIPLL */ > +#define PRCI_PRCIPLL_OFFSET 0xe0 > + > +#define PRCI_PRCIPLL_CLTXPLL (0x1 << 0) > +#define PRCI_PRCIPLL_GEMGXLPLL (0x1 << 1) > +#define PRCI_PRCIPLL_DDRPLL (0x1 << 2) > +#define PRCI_PRCIPLL_HFPCLKPLL (0x1 << 3) > +#define PRCI_PRCIPLL_DVFSCOREPLL (0x1 << 4) > +#define PRCI_PRCIPLL_COREPLL (0x1 << 5) > + > +/* PROCMONCFG */ > +#define PRCI_PROCMONCFG_OFFSET 0xF0 > +#define PRCI_PROCMONCFG_CORE_CLOCK_SHIFT 24 > +#define PRCI_PROCMONCFG_CORE_CLOCK_MASK \ > + (0x1 << PRCI_PROCMONCFG_CORE_CLOCK_SHIFT) > + > +/* > + * Private structures > + */ > + > +/** > + * struct __prci_data - per-device-instance data > + * @va: base virtual address of the PRCI IP block > + * @parent: parent clk instance > + * > + * PRCI per-device instance data > + */ > +struct __prci_data { > + void *va; > + struct clk parent_hfclk; > + struct clk parent_rtcclk; > +}; > + > +/** > + * struct __prci_wrpll_data - WRPLL configuration and integration data > + * @c: WRPLL current configuration record > + * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else > NULL) > + * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL) > + * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base > address > + * @cfg1_offs: WRPLL CFG1 register offset (in bytes) from the PRCI base > address > + * @release_reset: fn ptr to code to release clock reset > + * > + * @enable_bypass and @disable_bypass are used for WRPLL instances > + * that contain a separate external glitchless clock mux downstream > + * from the PLL. The WRPLL internal bypass mux is not glitchless. > + */ > +struct __prci_wrpll_data { > + struct wrpll_cfg c; > + void (*enable_bypass)(struct __prci_data *pd); > + void (*disable_bypass)(struct __prci_data *pd); > + u8 cfg0_offs; > + u8 cfg1_offs; > + void (*release_reset)(struct __prci_data *pd); > +}; > + > +/** > + * struct __prci_clock - describes a clock device managed by PRCI > + * @name: user-readable clock name string - should match the manual > + * @parent_name: parent name for this clock > + * @ops: struct __prci_clock_ops for control > + * @pwd: WRPLL-specific data, associated with this clock (if not NULL) > + * @pd: PRCI-specific data associated with this clock (if not NULL) > + * > + * PRCI clock data. Used by the PRCI driver to register PRCI-provided > + * clocks to the Linux clock infrastructure. > + */ > +struct __prci_clock { > + const char *name; > + const char *parent_name; > + const struct __prci_clock_ops *ops; > + struct __prci_wrpll_data *pwd; > + struct __prci_data *pd; > +}; > + > +/* struct __prci_clock_ops - clock operations */ > +struct __prci_clock_ops { > + int (*set_rate)(struct __prci_clock *pc, > + unsigned long rate, > + unsigned long parent_rate); > + unsigned long (*round_rate)(struct __prci_clock *pc, > + unsigned long rate, > + unsigned long *parent_rate); > + unsigned long (*recalc_rate)(struct __prci_clock *pc, > + unsigned long parent_rate); > + int (*enable_clk)(struct __prci_clock *pc, bool enable); > +}; > + > +/* > + * struct prci_clk_desc - describes the information of clocks of each SoCs > + * @clks: point to a array of __prci_clock > + * @num_clks: the number of element of clks > + */ > +struct prci_clk_desc { > + struct __prci_clock *clks; > + size_t num_clks; > +}; > + > +void sifive_prci_ethernet_release_reset(struct __prci_data *pd); > +void sifive_prci_ddr_release_reset(struct __prci_data *pd); > +void sifive_prci_cltx_release_reset(struct __prci_data *pd); > + > +/* Core clock mux control */ > +void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd); > +void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd); > +void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd); > +void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd); > +void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd); > +void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd); > +void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd); > + > +unsigned long sifive_prci_wrpll_round_rate(struct __prci_clock *pc, > + unsigned long rate, > + unsigned long *parent_rate); > + > +/* Linux clock framework integration */ > +int sifive_prci_wrpll_set_rate(struct __prci_clock *pc, > + unsigned long rate, > + unsigned long parent_rate); > + > +unsigned long sifive_prci_wrpll_recalc_rate(struct __prci_clock *pc, > + unsigned long parent_rate); > + > +unsigned long sifive_prci_tlclksel_recalc_rate(struct __prci_clock *pc, > + unsigned long parent_rate); > + > +unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct __prci_clock *pc, > + unsigned long parent_rate); > + > +int sifive_prci_clock_enable(struct __prci_clock *pc, bool enable); > + > +#endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */ > -- > 2.31.0 > -- Regards, Dimitri. -- Regards, Dimitri.
