Much of the image-handling code predates the introduction of Kconfig and has quite a few #ifdefs in it. It also uses its own IMAGE_... defines to help reduce the #ifdefs, which is unnecessary now that we can use IS_ENABLED() et al.
The image code is also where quite a bit of code is shared with the host tools. At present this uses a lot of checks of USE_HOSTCC. This series introduces 'host' Kconfig options and a way to use CONFIG_IS_ENABLED() to check them. This works in a similar way to SPL, so CONFIG_IS_ENABLED(FIT) will evaluate to true on the host build (USE_HOSTCC) if CONFIG_HOST_FIT is enabled. This allows quite a bit of clean-up of the image.h header file and many of the image C files. The 'host' Kconfig options should help to solve a more general problem in that we mostly want the host tools to build with all features enabled, no matter which features the 'target' build actually uses. This is a pain to arrange at present, but with 'host' Kconfigs, we can just define them all to y. There are cases where the host tools do not have features which are present on the target, for example environment and physical addressing. To help with this, some of the core image code is split out into image-board.c and image-host.c files. Even with these changes, some #ifdefs remain (101 down to 42 in common/image*). But the code is somewhat easier to follow and there are fewer build paths. In service of the above, this series includes a patch to add an API function for zstd, so the code can be dropped from bootm.c It also introduces a function to handle manual relocation. Changes in v2: - Add new abuf_init_set() function Simon Glass (49): Add support for an owned buffer compiler: Add a comment to host_build() zstd: Create a function for use from U-Boot btrfs: Use U-Boot API for decompression image: Avoid switch default in image_decomp() image: Update zstd to avoid reporting error twice gzip: Avoid use of u64 image: Update image_decomp() to avoid ifdefs image: Split board code out into its own file image: Fix up checkpatch warnings in image-board.c image: Split host code out into its own file image: Create a function to do manual relocation image: Avoid #ifdefs for manual relocation image: Remove ifdefs around image_setup_linux() el at image: Add Kconfig options for FIT in the host build kconfig: Add host support to CONFIG_IS_ENABLED() image: Shorten FIT_ENABLE_SHAxxx_SUPPORT image: Rename SPL_SHAxxx_SUPPORT to SPL_FIT_SHAxxx hash: Use Kconfig to enable hashing in host tools hash: Drop some #ifdefs in hash.c image: Drop IMAGE_ENABLE_FIT image: Drop IMAGE_ENABLE_OF_LIBFDT image: Use Kconfig to enable CONFIG_FIT_VERBOSE on host image: Rename CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORT image: Use Kconfig to enable FIT_RSASSA_PSS on host Kconfig: Rename SPL_CRC32_SUPPORT to SPL_CRC32 image: Drop IMAGE_ENABLE_CRC32 Kconfig: Rename SPL_MD5_SUPPORT to SPL_MD5 image: Drop IMAGE_ENABLE_MD5 image: Drop IMAGE_ENABLE_SHA1 image: Drop IMAGE_ENABLE_SHAxxx image: Drop IMAGE_BOOT_GET_CMDLINE image: Drop IMAGE_OF_BOARD_SETUP image: Drop IMAGE_OF_SYSTEM_SETUP image: Drop IMAGE_ENABLE_IGNORE image: Drop IMAGE_ENABLE_SIGN/VERIFY defines image: Drop IMAGE_ENABLE_BEST_MATCH image: Drop IMAGE_ENABLE_EN/DECRYPT defines image: Tidy up fit_unsupported_reset() image: Drop unnecessary #ifdefs from image.h image: Drop #ifdefs for fit_print_contents() image: Drop most #ifdefs in image-board.c image: Reduce variable scope in boot_get_ramdisk() image: Split up boot_get_ramdisk() image: Remove #ifdefs from select_ramdisk() image: Remove some #ifdefs from image-fit and image-fit-sig image: Reduce variable scope in boot_get_fdt() image: Split up boot_get_fdt() image: Remove #ifdefs from select_fdt() arch/arc/lib/bootm.c | 2 +- arch/arm/lib/bootm.c | 4 +- arch/arm/mach-imx/hab.c | 2 +- arch/microblaze/lib/bootm.c | 2 +- arch/nds32/lib/bootm.c | 4 +- arch/riscv/lib/bootm.c | 4 +- board/synopsys/hsdk/hsdk.c | 2 +- common/Kconfig.boot | 18 +- common/Makefile | 2 +- common/bootm.c | 30 +- common/bootm_os.c | 8 + common/hash.c | 96 +- common/image-board.c | 958 +++++++++++++++++ common/image-cipher.c | 6 +- common/image-fdt.c | 275 ++--- common/image-fit-sig.c | 7 +- common/image-fit.c | 42 +- common/image-host.c | 27 + common/image-sig.c | 57 +- common/image.c | 1179 ++------------------- common/spl/Kconfig | 27 +- configs/axm_defconfig | 2 +- configs/bcm963158_ram_defconfig | 2 +- configs/chromebit_mickey_defconfig | 2 +- configs/chromebook_jerry_defconfig | 2 +- configs/chromebook_minnie_defconfig | 2 +- configs/chromebook_speedy_defconfig | 2 +- configs/evb-px30_defconfig | 2 +- configs/firefly-px30_defconfig | 2 +- configs/imxrt1020-evk_defconfig | 2 +- configs/imxrt1050-evk_defconfig | 2 +- configs/mt8516_pumpkin_defconfig | 2 +- configs/odroid-go2_defconfig | 2 +- configs/px30-core-ctouch2-px30_defconfig | 2 +- configs/px30-core-edimm2.2-px30_defconfig | 2 +- configs/sandbox_defconfig | 3 +- configs/socfpga_agilex_atf_defconfig | 2 +- configs/socfpga_agilex_vab_defconfig | 2 +- configs/socfpga_stratix10_atf_defconfig | 2 +- configs/taurus_defconfig | 2 +- fs/btrfs/compression.c | 51 +- include/abuf.h | 148 +++ include/compiler.h | 8 + include/fdt_support.h | 2 +- include/gzip.h | 8 +- include/image.h | 178 +--- include/linux/kconfig.h | 13 +- include/linux/zstd.h | 11 + include/relocate.h | 30 +- include/u-boot/aes.h | 8 +- include/u-boot/ecdsa.h | 2 +- include/u-boot/hash-checksum.h | 5 +- include/u-boot/rsa.h | 12 +- lib/Kconfig | 5 + lib/Makefile | 5 +- lib/abuf.c | 103 ++ lib/gunzip.c | 28 +- lib/hash-checksum.c | 2 +- lib/lmb.c | 2 +- lib/rsa/rsa-sign.c | 4 +- lib/rsa/rsa-verify.c | 4 +- lib/zstd/Makefile | 2 +- lib/zstd/zstd.c | 64 ++ test/lib/Makefile | 1 + test/lib/abuf.c | 303 ++++++ tools/Kconfig | 111 ++ tools/Makefile | 19 +- tools/image-host.c | 6 +- 68 files changed, 2276 insertions(+), 1650 deletions(-) create mode 100644 common/image-board.c create mode 100644 common/image-host.c create mode 100644 include/abuf.h create mode 100644 lib/abuf.c create mode 100644 lib/zstd/zstd.c create mode 100644 test/lib/abuf.c -- 2.31.1.527.g47e6f16901-goog
