From: Marcin Wojtas <m...@semihalf.com>
Because the mvpp2 driver now relies on the PHYLIB and
the external MDIO driver, configuring low level
SMI bus settings is redundant.
Signed-off-by: Marcin Wojtas <m...@semihalf.com>
Reviewed-by: Kostya Porotchkin <kos...@marvell.com>
Reviewed-by: Stefan Chulski <stef...@marvell.com>
Signed-off-by: Stefan Roese <s...@denx.de>
---
(no changes since v1)
drivers/net/mvpp2.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 847007d5b487..2043bdf10aa4 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -5292,14 +5292,6 @@ static int mvpp2_write_hwaddr(struct udevice *dev)
return mvpp2_prs_update_mac_da(port, port->dev_addr);
}
-static int mvpp22_smi_phy_addr_cfg(struct mvpp2_port *port)
-{
- writel(port->phyaddr, port->priv->iface_base +
- MVPP22_SMI_PHY_ADDR_REG(port->gop_id));
-
- return 0;
-}
-
static int mvpp2_base_probe(struct udevice *dev)
{
struct mvpp2 *priv = dev_get_priv(dev);
@@ -5422,10 +5414,6 @@ static int mvpp2_probe(struct udevice *dev)
port->base = priv->iface_base + MVPP22_PORT_BASE +
port->gop_id * MVPP22_PORT_OFFSET;
- /* Set phy address of the port */
- if (port->phyaddr < PHY_MAX_ADDR)
- mvpp22_smi_phy_addr_cfg(port);
-
/* GoP Init */
gop_port_init(port);
}
--
2.31.1
