> -----Original Message----- > From: Prafulla Wadaskar > Sent: Tuesday, October 19, 2010 4:35 PM > To: 'Eric Cooper'; Heiko Schocher > Cc: u-boot@lists.denx.de > Subject: RE: [PATCH] arm926ejs, suen3: fix relocation issues > > > > > -----Original Message----- > > From: Eric Cooper [mailto:e...@cmu.edu] > > Sent: Tuesday, October 19, 2010 4:14 PM > > To: Heiko Schocher > > Cc: Prafulla Wadaskar; u-boot@lists.denx.de > > Subject: Re: [PATCH] arm926ejs, suen3: fix relocation issues > > > > > Maybe, Eric (added to cc: ) should also try to do early > things (like > > > kirkwood_mpp_conf()) in board_early_init_f() as I on the suen3? > > > > I will try this and let you know. But the most helpful > data point for > > me would be whether display_banner etc. currently works on a > > SheevaPlug, which is almost identical to the DockStar. > > Hi Eric > I checked on Sheevaplug, but sheevaplug has usb-UART > interface, that does not help to test this. > Since by the time UART is up board is in booted state. > > There is anther way to test this, erase native u-boot and > check from boot from DRAM, I have not tested this yet. > > But I think this must be problem on sheevaplug too ?
Crosschecked, This problem is on all the Kirkwood boards, I am posting fix up patch for all Marvell boards. Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
