Dear Marek Vasut,
In message <201010192228.34814.marek.va...@gmail.com> you wrote:
> Hi,
> please pull my git://git.denx.de/u-boot-pxa for-wd-testing branch into your u-
> boot-testing/Makefile-cleanup branch. Thanks
>
> The following changes since commit a5cb985d8006bd1bb6d188b84f435f5d007fd6ac:
>
> Makefile: move all Power Architecture boards into boards.cfg (2010-10-17
> 01:34:08 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git for-wd-testing
>
> Marek Vasut (19):
> PXA: pxafb: Fix indent problems
> PXA: pxa-regs.h cleanup
> PXA: pxafb: Add ACX517AKN support
> PXA: pxafb: Add support for Sharp LQ038J7DH53
> PXA: pxafb: Marvell Littleton LCD definition
> common: Enable serial for PXA250
> PXA: Palm Tungsten|C Support
> PXA: Add initial Palm LifeDrive support
> PXA: Voipac270 improvements
> PXA: Balloon3 board support
> PXA: Add missing MAINTAINERS entries
> PXA: Add necessary information for RELOC
> PXA: Fix reloc, Push lowlevel init into C code
> PXA: Fix vpac270 for Reloc
> PXA: Fix ZipitZ2 for Reloc
> PXA: Fix Balloon3 for Reloc
> PXA: Fix vpac270 OneNAND booter
> Build: PXA: Fix Vpac270 build variants
> Build: PXA: Fix TrizepsIV build variants
>
> Mikhail Kshevetskiy (4):
> PXA: remove unused u-boot.lds from board/vpac270
> PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000
> PXA: fix environment sector size, kernel and environment location for
> vpac270
> PXA: fix MDREFR[APD] bit setting
>
> MAINTAINERS | 9 +
> MAKEALL | 7 +-
> Makefile | 17 -
> arch/arm/cpu/pxa/cpu.c | 255 +++-
> arch/arm/cpu/pxa/i2c.c | 69 +-
> arch/arm/cpu/pxa/pxafb.c | 365 +++--
> arch/arm/cpu/pxa/start.S | 346 ++---
> arch/arm/cpu/pxa/timer.c | 7 +-
> arch/arm/cpu/pxa/usb.c | 61 +-
> arch/arm/include/asm/arch-pxa/hardware.h | 61 +-
> arch/arm/include/asm/arch-pxa/macro.h | 20 +-
> arch/arm/include/asm/arch-pxa/pxa-regs.h | 2688
> +++++++++++++++--------------
> board/balloon3/Makefile | 47 +
> board/balloon3/balloon3.c | 238 +++
> board/colibri_pxa270/colibri_pxa270.c | 33 +-
> board/cradle/cradle.c | 5 +-
> board/cradle/lowlevel_init.S | 4 +-
> board/csb226/csb226.c | 13 +-
> board/delta/delta.c | 37 +-
> board/delta/nand.c | 110 +-
> board/innokom/innokom.c | 14 +-
> board/palmld/Makefile | 49 +
> board/palmld/config.mk | 1 +
> board/{zipitz2 => palmld}/lowlevel_init.S | 9 +-
> board/palmld/palmld.c | 69 +
> board/{vpac270 => palmld}/u-boot.lds | 7 +-
> board/palmtc/Makefile | 49 +
> board/palmtc/config.mk | 1 +
> board/{vpac270 => palmtc}/lowlevel_init.S | 3 +-
> board/palmtc/palmtc.c | 59 +
> board/{vpac270 => palmtc}/u-boot.lds | 7 +-
> board/pxa255_idp/pxa_idp.c | 27 +-
> board/trizepsiv/conxs.c | 35 +-
> board/vpac270/Makefile | 17 +-
> board/vpac270/config.mk | 1 -
> board/vpac270/vpac270.c | 92 +-
> board/wepep250/wepep250.c | 11 +-
> board/zipitz2/Makefile | 10 +-
> board/zipitz2/config.mk | 1 -
> board/zipitz2/zipitz2.c | 57 +-
> board/zylonite/nand.c | 110 +-
> boards.cfg | 8 +
> common/serial.c | 2 +-
> drivers/mmc/pxa_mmc.c | 98 +-
> drivers/serial/serial_pxa.c | 94 +-
> include/configs/balloon3.h | 274 +++
> include/configs/cerf250.h | 3 +
> include/configs/colibri_pxa270.h | 3 +
> include/configs/cradle.h | 5 +-
> include/configs/csb226.h | 3 +
> include/configs/delta.h | 4 +
> include/configs/innokom.h | 3 +
> include/configs/lubbock.h | 3 +
> include/configs/palmld.h | 276 +++
> include/configs/palmtc.h | 248 +++
> include/configs/pleb2.h | 3 +
> include/configs/pxa255_idp.h | 3 +
> include/configs/trizepsiv.h | 3 +
> include/configs/vpac270.h | 138 +-
> include/configs/wepep250.h | 4 +
> include/configs/xaeniax.h | 3 +
> include/configs/xm250.h | 3 +
> include/configs/xsengine.h | 3 +
> include/configs/zipitz2.h | 10 +-
> include/configs/zylonite.h | 3 +
> onenand_ipl/board/vpac270/Makefile | 5 +-
> 66 files changed, 4017 insertions(+), 2206 deletions(-)
> create mode 100644 board/balloon3/Makefile
> create mode 100644 board/balloon3/balloon3.c
> create mode 100644 board/palmld/Makefile
> create mode 100644 board/palmld/config.mk
> rename board/{zipitz2 => palmld}/lowlevel_init.S (90%)
> create mode 100644 board/palmld/palmld.c
> copy board/{vpac270 => palmld}/u-boot.lds (90%)
> create mode 100644 board/palmtc/Makefile
> create mode 100644 board/palmtc/config.mk
> rename board/{vpac270 => palmtc}/lowlevel_init.S (95%)
> create mode 100644 board/palmtc/palmtc.c
> rename board/{vpac270 => palmtc}/u-boot.lds (90%)
> delete mode 100644 board/vpac270/config.mk
> delete mode 100644 board/zipitz2/config.mk
> create mode 100644 include/configs/balloon3.h
> create mode 100644 include/configs/palmld.h
> create mode 100644 include/configs/palmtc.h
Dunno what was wrong with your tree.
Cherry-picked the commits one by one.
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
So we follow our wandering paths, and the very darkness acts as our
guide and our doubts serve to reassure us. - Jean-Pierre de Caussade,
eighteenth-century Jesuit priest
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
