[PATCH] arm64: dts: meson: odroidc2: readd PHY reset properties

[Stefan Agner]

The sync of the device tree and dt-bindings from Linux v5.6-rc2
11a48a5a18c6 ("Linux 5.6-rc2") causes Ethernet to break on some
ODROID-C2. The PHY seems to need proper reset timing to be functional
in U-Boot and Linux afterwards. Readd the old PHY reset bindings for
dwmac until we support the new bindings in the PHY node.

Fixes: dd5f2351e99a ("arm64: dts: meson: sync dt and bindings from v5.6-rc2")
Signed-off-by: Stefan Agner <ste...@agner.ch>
---
 arch/arm/dts/meson-gxbb-odroidc2.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts 
b/arch/arm/dts/meson-gxbb-odroidc2.dts
index 70fcfb7b06..8b80bbc90b 100644
--- a/arch/arm/dts/meson-gxbb-odroidc2.dts
+++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
@@ -188,6 +188,10 @@
        phy-handle = <&eth_phy0>;
        phy-mode = "rgmii";
 
+       snps,reset-gpio = <&gpio GPIOZ_14 0>;
+       snps,reset-delays-us = <0 10000 1000000>;
+       snps,reset-active-low;
+
        amlogic,tx-delay-ns = <2>;
 
        mdio {
-- 
2.31.1