út 23. 2. 2021 v 14:53 odesílatel Michal Simek <[email protected]> napsal: > > From: Amit Kumar Mahapatra <[email protected]> > > Update the following device tree properties for nand flash > > - Set software ecc mode. > - Set bch as ecc algo. > - Set read block to 0. > > Signed-off-by: Amit Kumar Mahapatra <[email protected]> > Signed-off-by: Michal Simek <[email protected]> > --- > > arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts > b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts > index 92d938d665d2..3204456e6451 100644 > --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts > +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts > @@ -124,6 +124,10 @@ > reg = <0x0>; > #address-cells = <0x2>; > #size-cells = <0x1>; > + nand-ecc-mode = "soft"; > + nand-ecc-algo = "bch"; > + nand-rb = <0>; > + label = "main-storage-0"; > > partition@0 { /* for testing purpose */ > label = "nand-fsbl-uboot"; > @@ -154,6 +158,10 @@ > reg = <0x1>; > #address-cells = <0x2>; > #size-cells = <0x1>; > + nand-ecc-mode = "soft"; > + nand-ecc-algo = "bch"; > + nand-rb = <0>; > + label = "main-storage-1"; > > partition@0 { /* for testing purpose */ > label = "nand1-fsbl-uboot"; > -- > 2.30.0 >
Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
