Dear Reinhard Meyer, In message <4cba3fc0.1010...@emk-elektronik.de> you wrote: > > > In case of simple options like '256M_U_BOOT', these expand to > > "#define CONFIG_MK_256M_U_BOOT 1" in config.h . In case of > > assignments like 'RAM=8192', these expand to "#define CONFIG_MK_RAM > > 8192" in config.h . > > Umm, what about: > > > Out of principle: please omit the "1" in all such cases unless you > > really want to pass or test for such a numeric value anywhere. As far > > as I can tell all relevant code uses only "#ifdef" or "defined(...)", > > so not to confuse people better omit the irrelevant value. > > Your own words ;)
Yes, I know. > If someone really needs the "1", they can always write "=1" in boards.cfg. Yes, you are right. But note that this is not new behaviour, but the way it has been working all the time. I decided intentionally NOT to change this now, to avoid changing too many things at the same time. The change itself i trivial and can be performed (and tested) separataely. I have a number of othe rclean-up actions on my list, but for now I want to get really big changes in. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de A failure will not appear until a unit has passed final inspection. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
