From: Peng Fan <peng....@nxp.com>
These files should not be in U-Boot repo
Signed-off-by: Peng Fan <peng....@nxp.com>
---
board/freescale/imx8mm_evk/boot.cmd | 35 -----------------------------
board/freescale/imx8mp_evk/boot.cmd | 25 ---------------------
2 files changed, 60 deletions(-)
delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
diff --git a/board/freescale/imx8mm_evk/boot.cmd
b/board/freescale/imx8mm_evk/boot.cmd
deleted file mode 100644
index fdfceec263..0000000000
--- a/board/freescale/imx8mm_evk/boot.cmd
+++ /dev/null
@@ -1,35 +0,0 @@
-setenv bootargs console=${console} root=${mmcroot};
-
-for boot_target in ${boot_targets};
-do
- if test "${boot_target}" = "mmc1" ; then
- if fatload mmc 1:${mmcpart} ${kernel_addr_r} ${image}; then
- if fatload mmc 1:${mmcpart} ${fdt_addr} ${fdt_file};
then
- echo Load image and .dtb from SD card(mmc1);
- booti ${kernel_addr_r} - ${fdt_addr};
- exit;
- fi
- fi
- fi
-
- if test "${boot_target}" = "mmc2" ; then
- if fatload mmc 2:${mmcpart} ${kernel_addr_r} ${image}; then
- if fatload mmc 2:${mmcpart} ${fdt_addr} ${fdt_file};
then
- echo Load image and .dtb from eMMC(mmc2);
- booti ${kernel_addr_r} - ${fdt_addr};
- exit;
- fi
- fi
- fi
-
- if test "${boot_target}" = "dhcp" ; then
- if dhcp ${kernel_addr_r} ${serverip}:${image}; then
- if dhcp ${fdt_addr} ${serverip}:${fdt_file}; then
- echo Load image and .dtb from net(dhcp);
- booti ${kernel_addr_r} - ${fdt_addr};
- exit;
- fi
- fi
- fi
-
-done
diff --git a/board/freescale/imx8mp_evk/boot.cmd
b/board/freescale/imx8mp_evk/boot.cmd
deleted file mode 100644
index 10bcced774..0000000000
--- a/board/freescale/imx8mp_evk/boot.cmd
+++ /dev/null
@@ -1,25 +0,0 @@
-setenv bootargs console=${console} root=${mmcroot};
-
-for boot_target in ${boot_targets};
-do
- if test "${boot_target}" = "mmc1" ; then
- if fatload mmc 1:${mmcpart} ${kernel_addr_r} ${image}; then
- if fatload mmc 1:${mmcpart} ${fdt_addr} ${fdt_file};
then
- echo Load image and .dtb from SD card(mmc1);
- booti ${kernel_addr_r} - ${fdt_addr};
- exit;
- fi
- fi
- fi
-
- if test "${boot_target}" = "mmc2" ; then
- if fatload mmc 2:${mmcpart} ${kernel_addr_r} ${image}; then
- if fatload mmc 2:${mmcpart} ${fdt_addr} ${fdt_file};
then
- echo Load image and .dtb from eMMC(mmc2);
- booti ${kernel_addr_r} - ${fdt_addr};
- exit;
- fi
- fi
- fi
-
-done
--
2.30.0
