[PATCH 27/34] x86: video: Allow coreboot video to be used on any x86 board

[Simon Glass]

When booting from coreboot we need this driver for the video to work.
Update the driver to be usable on any board.

The driver disables itself if it sees that is not booted from coreboot.

Signed-off-by: Simon Glass <s...@chromium.org>
---

 drivers/video/Kconfig    |  2 +-
 drivers/video/coreboot.c | 16 ++++++++++++----
 2 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 667157c2e97..63ae2ba43c4 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -241,7 +241,7 @@ config VIDCONSOLE_AS_NAME
 
 config VIDEO_COREBOOT
        bool "Enable coreboot framebuffer driver support"
-       depends on X86 && SYS_COREBOOT
+       depends on X86
        help
          Turn on this option to enable a framebuffer driver when U-Boot is
          loaded by coreboot where the graphics device is configured by
diff --git a/drivers/video/coreboot.c b/drivers/video/coreboot.c
index 55f72fe886f..7237542c076 100644
--- a/drivers/video/coreboot.c
+++ b/drivers/video/coreboot.c
@@ -5,6 +5,7 @@
 
 #include <common.h>
 #include <dm.h>
+#include <init.h>
 #include <vbe.h>
 #include <video.h>
 #include <asm/cb_sysinfo.h>
@@ -17,7 +18,7 @@ static int save_vesa_mode(struct cb_framebuffer *fb,
         * running on the serial console.
         */
        if (!fb)
-               return -ENXIO;
+               return log_msg_ret("save", -ENXIO);
 
        vesa->x_resolution = fb->x_resolution;
        vesa->y_resolution = fb->y_resolution;
@@ -44,16 +45,23 @@ static int coreboot_video_probe(struct udevice *dev)
        struct vesa_mode_info *vesa = &mode_info.vesa;
        int ret;
 
+       if (ll_boot_init())
+               return log_msg_ret("ll", -ENODEV);
+
        printf("Video: ");
 
        /* Initialize vesa_mode_info structure */
        ret = save_vesa_mode(fb, vesa);
-       if (ret)
+       if (ret) {
+               ret = log_msg_ret("save", ret);
                goto err;
+       }
 
        ret = vbe_setup_video_priv(vesa, uc_priv, plat);
-       if (ret)
+       if (ret) {
+               ret = log_msg_ret("setup", ret);
                goto err;
+       }
 
        printf("%dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
               vesa->bits_per_pixel);
@@ -61,7 +69,7 @@ static int coreboot_video_probe(struct udevice *dev)
        return 0;
 
 err:
-       printf("No video mode configured in coreboot!\n");
+       printf("No video mode configured in coreboot (err=%d)\n", ret);
        return ret;
 }
 
-- 
2.31.0.rc2.261.g7f71774620-goog