From: Philippe Schenker <philippe.schen...@toradex.com>
All the other boards have tdxargs specified for setting manual kernel
command-line arguments. Add them also to NAND-based boards.
Signed-off-by: Philippe Schenker <philippe.schen...@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvo...@toradex.com>
---
include/configs/colibri-imx6ull.h | 2 +-
include/configs/colibri_imx7.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/colibri-imx6ull.h
b/include/configs/colibri-imx6ull.h
index 2827c171c9..22ee2ba03e 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -63,7 +63,7 @@
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
"setenv bootargs ${defargs} ${ubiargs} " \
- "${setupargs} ${vidargs}; echo Booting from NAND...; " \
+ "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...;
" \
"ubi part ubi &&" \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 85dd891055..2fffaa39c0 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -110,7 +110,7 @@
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
"setenv bootargs ${defargs} ${ubiargs} " \
- "${setupargs} ${vidargs}; echo Booting from NAND...; " \
+ "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...;
" \
"ubi part ubi && run m4boot && " \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
--
2.29.2
