On 08.02.21 23:01, Marek Behún wrote:
Linux displays the real PCIe card connected to a mvebu PCIe slot as
device 0, not 1. This is done by setting local dev number to 1, so that
the local "Marvell Memory controller" device is on address 1.
Let's do it also in U-Boot.
With this commit the pci command in U-Boot prints something like:
=> pci
Scanning PCI devices on bus 0
BusDevFun VendorId DeviceId Device Class Sub-Class
_____________________________________________________________
00.00.00 0x168c 0x003c Network controller 0x80
Signed-off-by: Marek Behún <marek.be...@nic.cz>
Cc: Stefan Roese <s...@denx.de>
Cc: Phil Sutter <p...@nwl.cc>
Cc: Mario Six <mario....@gdsys.cc>
Cc: Baruch Siach <bar...@tkos.co.il>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
drivers/pci/pci_mvebu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c
index 2d923b7d8d..11b590617d 100644
--- a/drivers/pci/pci_mvebu.c
+++ b/drivers/pci/pci_mvebu.c
@@ -288,7 +288,7 @@ static int mvebu_pcie_probe(struct udevice *dev)
mvebu_pcie_get_local_dev_nr(pcie));
pcie->first_busno = bus;
- pcie->local_dev = 0;
+ pcie->local_dev = 1;
mvebu_pcie_set_local_bus_nr(pcie, bus);
mvebu_pcie_set_local_dev_nr(pcie, pcie->local_dev);
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
