The static ethernet link type config code is no more needed because now handled
by
the meson8b glue driver, delete it.
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
arch/arm/include/asm/arch-meson/axg.h | 22 -------------
arch/arm/include/asm/arch-meson/eth.h | 12 -------
arch/arm/include/asm/arch-meson/g12a.h | 35 ---------------------
arch/arm/include/asm/arch-meson/gx.h | 20 ------------
arch/arm/mach-meson/board-axg.c | 34 --------------------
arch/arm/mach-meson/board-g12a.c | 31 ------------------
arch/arm/mach-meson/board-gx.c | 35 ---------------------
board/amlogic/beelink-s922x/beelink-s922x.c | 2 --
board/amlogic/odroid-n2/odroid-n2.c | 2 --
board/amlogic/p200/p200.c | 2 --
board/amlogic/p201/p201.c | 2 --
board/amlogic/p212/p212.c | 3 --
board/amlogic/q200/q200.c | 2 --
board/amlogic/s400/s400.c | 2 --
board/amlogic/sei510/sei510.c | 3 --
board/amlogic/sei610/sei610.c | 3 --
board/amlogic/u200/u200.c | 3 +-
board/amlogic/vim3/vim3.c | 2 --
board/amlogic/w400/w400.c | 2 +-
19 files changed, 2 insertions(+), 215 deletions(-)
diff --git a/arch/arm/include/asm/arch-meson/axg.h
b/arch/arm/include/asm/arch-meson/axg.h
index 91c87696e0..12042de935 100644
--- a/arch/arm/include/asm/arch-meson/axg.h
+++ b/arch/arm/include/asm/arch-meson/axg.h
@@ -31,26 +31,4 @@
#define AXG_AO_BL31_RSVMEM_SIZE_SHIFT 16
#define AXG_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
-/* Peripherals registers */
-#define AXG_PERIPHS_ADDR(off) (AXG_PERIPHS_BASE + ((off) << 2))
-
-#define AXG_ETH_REG_0 AXG_PERIPHS_ADDR(0x50)
-#define AXG_ETH_REG_1 AXG_PERIPHS_ADDR(0x51)
-
-#define AXG_ETH_REG_0_PHY_INTF_RGMII BIT(0)
-#define AXG_ETH_REG_0_PHY_INTF_RMII BIT(2)
-#define AXG_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
-#define AXG_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
-#define AXG_ETH_REG_0_PHY_CLK_EN BIT(10)
-#define AXG_ETH_REG_0_INVERT_RMII_CLK BIT(11)
-#define AXG_ETH_REG_0_CLK_EN BIT(12)
-
-/* HIU registers */
-#define AXG_HIU_ADDR(off) (AXG_HIU_BASE + ((off) << 2))
-
-#define AXG_MEM_PD_REG_0 AXG_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define AXG_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
-
#endif /* __AXG_H__ */
diff --git a/arch/arm/include/asm/arch-meson/eth.h
b/arch/arm/include/asm/arch-meson/eth.h
index f765cd7c4c..c0070615c2 100644
--- a/arch/arm/include/asm/arch-meson/eth.h
+++ b/arch/arm/include/asm/arch-meson/eth.h
@@ -7,18 +7,6 @@
#ifndef __MESON_ETH_H__
#define __MESON_ETH_H__
-#include <phy.h>
-
-enum {
- /* Use Internal RMII PHY */
- MESON_USE_INTERNAL_RMII_PHY = 1,
-};
-
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags);
-
/* Generate an unique MAC address based on the HW serial */
int meson_generate_serial_ethaddr(void);
diff --git a/arch/arm/include/asm/arch-meson/g12a.h
b/arch/arm/include/asm/arch-meson/g12a.h
index db29cc3a00..ef4f301f7d 100644
--- a/arch/arm/include/asm/arch-meson/g12a.h
+++ b/arch/arm/include/asm/arch-meson/g12a.h
@@ -32,39 +32,4 @@
#define G12A_AO_BL31_RSVMEM_SIZE_SHIFT 16
#define G12A_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
-/* Peripherals registers */
-#define G12A_PERIPHS_ADDR(off) (G12A_PERIPHS_BASE + ((off) << 2))
-
-#define G12A_ETH_REG_0 G12A_PERIPHS_ADDR(0x50)
-#define G12A_ETH_REG_1 G12A_PERIPHS_ADDR(0x51)
-
-#define G12A_ETH_REG_0_PHY_INTF_RGMII BIT(0)
-#define G12A_ETH_REG_0_PHY_INTF_RMII BIT(2)
-#define G12A_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
-#define G12A_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
-#define G12A_ETH_REG_0_PHY_CLK_EN BIT(10)
-#define G12A_ETH_REG_0_INVERT_RMII_CLK BIT(11)
-#define G12A_ETH_REG_0_CLK_EN BIT(12)
-
-#define G12A_ETH_PHY_ADDR(off) (G12A_ETH_PHY_BASE + ((off) << 2))
-#define ETH_PLL_CNTL0 G12A_ETH_PHY_ADDR(0x11)
-#define ETH_PLL_CNTL1 G12A_ETH_PHY_ADDR(0x12)
-#define ETH_PLL_CNTL2 G12A_ETH_PHY_ADDR(0x13)
-#define ETH_PLL_CNTL3 G12A_ETH_PHY_ADDR(0x14)
-#define ETH_PLL_CNTL4 G12A_ETH_PHY_ADDR(0x15)
-#define ETH_PLL_CNTL5 G12A_ETH_PHY_ADDR(0x16)
-#define ETH_PLL_CNTL6 G12A_ETH_PHY_ADDR(0x17)
-#define ETH_PLL_CNTL7 G12A_ETH_PHY_ADDR(0x18)
-#define ETH_PHY_CNTL0 G12A_ETH_PHY_ADDR(0x20)
-#define ETH_PHY_CNTL1 G12A_ETH_PHY_ADDR(0x21)
-#define ETH_PHY_CNTL2 G12A_ETH_PHY_ADDR(0x22)
-
-/* HIU registers */
-#define G12A_HIU_ADDR(off) (G12A_HIU_BASE + ((off) << 2))
-
-#define G12A_MEM_PD_REG_0 G12A_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define G12A_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
-
#endif /* __G12A_H__ */
diff --git a/arch/arm/include/asm/arch-meson/gx.h
b/arch/arm/include/asm/arch-meson/gx.h
index 743d2e8bb9..26ec5d0bc3 100644
--- a/arch/arm/include/asm/arch-meson/gx.h
+++ b/arch/arm/include/asm/arch-meson/gx.h
@@ -41,24 +41,4 @@
#define GX_GPIO_IN(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1)
#define GX_GPIO_OUT(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
-#define GX_ETH_REG_0 GX_PERIPHS_ADDR(0x50)
-#define GX_ETH_REG_1 GX_PERIPHS_ADDR(0x51)
-#define GX_ETH_REG_2 GX_PERIPHS_ADDR(0x56)
-#define GX_ETH_REG_3 GX_PERIPHS_ADDR(0x57)
-
-#define GX_ETH_REG_0_PHY_INTF BIT(0)
-#define GX_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
-#define GX_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
-#define GX_ETH_REG_0_PHY_CLK_EN BIT(10)
-#define GX_ETH_REG_0_INVERT_RMII_CLK BIT(11)
-#define GX_ETH_REG_0_CLK_EN BIT(12)
-
-/* HIU registers */
-#define GX_HIU_ADDR(off) (GX_HIU_BASE + ((off) << 2))
-
-#define GX_MEM_PD_REG_0 GX_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define GX_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
-
#endif /* __GX_H__ */
diff --git a/arch/arm/mach-meson/board-axg.c b/arch/arm/mach-meson/board-axg.c
index 3b14bc9989..71ac65c636 100644
--- a/arch/arm/mach-meson/board-axg.c
+++ b/arch/arm/mach-meson/board-axg.c
@@ -91,40 +91,6 @@ static struct mm_region axg_mem_map[] = {
struct mm_region *mem_map = axg_mem_map;
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags)
-{
- switch (mode) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- /* Set RGMII mode */
- setbits_le32(AXG_ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RGMII |
- AXG_ETH_REG_0_TX_PHASE(1) |
- AXG_ETH_REG_0_TX_RATIO(4) |
- AXG_ETH_REG_0_PHY_CLK_EN |
- AXG_ETH_REG_0_CLK_EN);
- break;
-
- case PHY_INTERFACE_MODE_RMII:
- /* Set RMII mode */
- out_le32(AXG_ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RMII |
- AXG_ETH_REG_0_INVERT_RMII_CLK |
- AXG_ETH_REG_0_CLK_EN);
- break;
-
- default:
- printf("Invalid Ethernet interface mode\n");
- return;
- }
-
- /* Enable power gate */
- clrbits_le32(AXG_MEM_PD_REG_0, AXG_MEM_PD_REG_0_ETH_MASK);
-}
-
#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
static struct dwc2_plat_otg_data meson_gx_dwc2_data;
diff --git a/arch/arm/mach-meson/board-g12a.c b/arch/arm/mach-meson/board-g12a.c
index cc7e01d014..2e59eee8f7 100644
--- a/arch/arm/mach-meson/board-g12a.c
+++ b/arch/arm/mach-meson/board-g12a.c
@@ -97,37 +97,6 @@ static struct mm_region g12a_mem_map[] = {
struct mm_region *mem_map = g12a_mem_map;
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags)
-{
- switch (mode) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- /* Set RGMII mode */
- setbits_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RGMII |
- G12A_ETH_REG_0_TX_PHASE(1) |
- G12A_ETH_REG_0_TX_RATIO(4) |
- G12A_ETH_REG_0_PHY_CLK_EN |
- G12A_ETH_REG_0_CLK_EN);
- break;
-
- case PHY_INTERFACE_MODE_RMII:
- /* Set RMII mode */
- out_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RMII |
- G12A_ETH_REG_0_INVERT_RMII_CLK |
- G12A_ETH_REG_0_CLK_EN);
- break;
-
- default:
- printf("Invalid Ethernet interface mode\n");
- return;
- }
-}
-
#if CONFIG_IS_ENABLED(USB_DWC3_MESON_G12A) && \
CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
static struct dwc2_plat_otg_data meson_g12a_dwc2_data;
diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c
index cae7af5afb..01fafd81c4 100644
--- a/arch/arm/mach-meson/board-gx.c
+++ b/arch/arm/mach-meson/board-gx.c
@@ -109,41 +109,6 @@ static struct mm_region gx_mem_map[] = {
struct mm_region *mem_map = gx_mem_map;
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags)
-{
- switch (mode) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- /* Set RGMII mode */
- setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
- GX_ETH_REG_0_TX_PHASE(1) |
- GX_ETH_REG_0_TX_RATIO(4) |
- GX_ETH_REG_0_PHY_CLK_EN |
- GX_ETH_REG_0_CLK_EN);
-
- break;
-
- case PHY_INTERFACE_MODE_RMII:
- /* Set RMII mode */
- out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
- GX_ETH_REG_0_CLK_EN);
-
- if (!IS_ENABLED(CONFIG_MESON_GXBB))
- writel(0x10110181, GX_ETH_REG_2);
-
- break;
-
- default:
- printf("Invalid Ethernet interface mode\n");
- return;
- }
-}
-
#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
static struct dwc2_plat_otg_data meson_gx_dwc2_data;
diff --git a/board/amlogic/beelink-s922x/beelink-s922x.c
b/board/amlogic/beelink-s922x/beelink-s922x.c
index dc0d933a39..bb74426266 100644
--- a/board/amlogic/beelink-s922x/beelink-s922x.c
+++ b/board/amlogic/beelink-s922x/beelink-s922x.c
@@ -28,8 +28,6 @@ int misc_init_r(void)
meson_get_soc_rev(tmp, sizeof(tmp)) > 0)
env_set("soc_rev", tmp);
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
efuse_mac_addr, EFUSE_MAC_SIZE);
diff --git a/board/amlogic/odroid-n2/odroid-n2.c
b/board/amlogic/odroid-n2/odroid-n2.c
index 863975e51b..88a60f34fe 100644
--- a/board/amlogic/odroid-n2/odroid-n2.c
+++ b/board/amlogic/odroid-n2/odroid-n2.c
@@ -115,8 +115,6 @@ int misc_init_r(void)
meson_get_soc_rev(tmp, sizeof(tmp)) > 0)
env_set("soc_rev", tmp);
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
efuse_mac_addr, EFUSE_MAC_SIZE);
diff --git a/board/amlogic/p200/p200.c b/board/amlogic/p200/p200.c
index 8f1bf8bfda..7c432f9d28 100644
--- a/board/amlogic/p200/p200.c
+++ b/board/amlogic/p200/p200.c
@@ -25,8 +25,6 @@ int misc_init_r(void)
char serial[EFUSE_SN_SIZE];
ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
mac_addr, EFUSE_MAC_SIZE);
diff --git a/board/amlogic/p201/p201.c b/board/amlogic/p201/p201.c
index 597bb71cbf..7c432f9d28 100644
--- a/board/amlogic/p201/p201.c
+++ b/board/amlogic/p201/p201.c
@@ -25,8 +25,6 @@ int misc_init_r(void)
char serial[EFUSE_SN_SIZE];
ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RMII, 0);
-
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
mac_addr, EFUSE_MAC_SIZE);
diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c
index fbc49e9565..fcef90bce5 100644
--- a/board/amlogic/p212/p212.c
+++ b/board/amlogic/p212/p212.c
@@ -26,9 +26,6 @@ int misc_init_r(void)
char serial[EFUSE_SN_SIZE];
ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RMII,
- MESON_USE_INTERNAL_RMII_PHY);
-
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
mac_addr, EFUSE_MAC_SIZE);
diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c
index 62e6fa3d19..3aa6d8f200 100644
--- a/board/amlogic/q200/q200.c
+++ b/board/amlogic/q200/q200.c
@@ -26,8 +26,6 @@ int misc_init_r(void)
char serial[EFUSE_SN_SIZE];
ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
mac_addr, EFUSE_MAC_SIZE);
diff --git a/board/amlogic/s400/s400.c b/board/amlogic/s400/s400.c
index b081942dcc..06a9044fd8 100644
--- a/board/amlogic/s400/s400.c
+++ b/board/amlogic/s400/s400.c
@@ -16,8 +16,6 @@
int misc_init_r(void)
{
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
meson_generate_serial_ethaddr();
return 0;
diff --git a/board/amlogic/sei510/sei510.c b/board/amlogic/sei510/sei510.c
index 5a5148ea68..bb188c21f7 100644
--- a/board/amlogic/sei510/sei510.c
+++ b/board/amlogic/sei510/sei510.c
@@ -18,9 +18,6 @@
int misc_init_r(void)
{
- meson_eth_init(PHY_INTERFACE_MODE_RMII,
- MESON_USE_INTERNAL_RMII_PHY);
-
meson_generate_serial_ethaddr();
env_set("serial#", "AMLG12ASEI510");
diff --git a/board/amlogic/sei610/sei610.c b/board/amlogic/sei610/sei610.c
index 27dba93582..6490bac9eb 100644
--- a/board/amlogic/sei610/sei610.c
+++ b/board/amlogic/sei610/sei610.c
@@ -18,9 +18,6 @@
int misc_init_r(void)
{
- meson_eth_init(PHY_INTERFACE_MODE_RMII,
- MESON_USE_INTERNAL_RMII_PHY);
-
meson_generate_serial_ethaddr();
env_set("serial#", "AMLG12ASEI610");
diff --git a/board/amlogic/u200/u200.c b/board/amlogic/u200/u200.c
index 373235d77a..06a9044fd8 100644
--- a/board/amlogic/u200/u200.c
+++ b/board/amlogic/u200/u200.c
@@ -16,8 +16,7 @@
int misc_init_r(void)
{
- meson_eth_init(PHY_INTERFACE_MODE_RMII,
- MESON_USE_INTERNAL_RMII_PHY);
+ meson_generate_serial_ethaddr();
return 0;
}
diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
index 7b09617cdc..6cd5f2e115 100644
--- a/board/amlogic/vim3/vim3.c
+++ b/board/amlogic/vim3/vim3.c
@@ -149,8 +149,6 @@ int misc_init_r(void)
char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
efuse_mac_addr, EFUSE_MAC_SIZE);
diff --git a/board/amlogic/w400/w400.c b/board/amlogic/w400/w400.c
index 47a51710dc..4199198496 100644
--- a/board/amlogic/w400/w400.c
+++ b/board/amlogic/w400/w400.c
@@ -14,7 +14,7 @@
int misc_init_r(void)
{
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
+ meson_generate_serial_ethaddr();
return 0;
}
--
2.25.1
