Hi Dirk, On Tuesday 12 October 2010 15:33:07 Dirk Eibach wrote: > Board support for the Guntermann & Drunck CATCenter Io.
Apart from Wolfgangs comments, some more from myself below. > diff --git a/include/configs/io.h b/include/configs/io.h > new file mode 100644 > index 0000000..53dce7d > --- /dev/null > +++ b/include/configs/io.h <snip> > +/* Gbit PHYs */ > +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ > + > +#define CONFIG_SYS_MDIO_PIN (0x80000000 >> 13) /* our MDIO is GPIO0 */ > +#define CONFIG_SYS_MDC_PIN (0x80000000 >> 7) /* our MDC is GPIO7 */ > + > +#define MDIO_ACTIVE out32(GPIO0_TCR, in32(GPIO0_TCR) | > CONFIG_SYS_MDIO_PIN) Use out_be32() accessors here and below. Please fix and resubmit. Thanks. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
