This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago. In addition there are other DM
migrations it is also missing. Remove it.
Cc: Marek Vasut <marek.va...@gmail.com>
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
arch/arm/mach-imx/mxs/Kconfig | 1 -
board/olimex/mx23_olinuxino/Kconfig | 15 ---
board/olimex/mx23_olinuxino/MAINTAINERS | 6 -
board/olimex/mx23_olinuxino/Makefile | 10 --
board/olimex/mx23_olinuxino/mx23_olinuxino.c | 81 -------------
board/olimex/mx23_olinuxino/spl_boot.c | 120 -------------------
configs/mx23_olinuxino_defconfig | 47 --------
include/configs/mx23_olinuxino.h | 118 ------------------
8 files changed, 398 deletions(-)
delete mode 100644 board/olimex/mx23_olinuxino/Kconfig
delete mode 100644 board/olimex/mx23_olinuxino/MAINTAINERS
delete mode 100644 board/olimex/mx23_olinuxino/Makefile
delete mode 100644 board/olimex/mx23_olinuxino/mx23_olinuxino.c
delete mode 100644 board/olimex/mx23_olinuxino/spl_boot.c
delete mode 100644 configs/mx23_olinuxino_defconfig
delete mode 100644 include/configs/mx23_olinuxino.h
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index c731d01d4ed3..636c08b26353 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -20,7 +20,6 @@ endchoice
config SYS_SOC
default "mxs"
-source "board/olimex/mx23_olinuxino/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
endif
diff --git a/board/olimex/mx23_olinuxino/Kconfig
b/board/olimex/mx23_olinuxino/Kconfig
deleted file mode 100644
index 0b151c9bb815..000000000000
--- a/board/olimex/mx23_olinuxino/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_MX23_OLINUXINO
-
-config SYS_BOARD
- default "mx23_olinuxino"
-
-config SYS_VENDOR
- default "olimex"
-
-config SYS_SOC
- default "mxs"
-
-config SYS_CONFIG_NAME
- default "mx23_olinuxino"
-
-endif
diff --git a/board/olimex/mx23_olinuxino/MAINTAINERS
b/board/olimex/mx23_olinuxino/MAINTAINERS
deleted file mode 100644
index 25f4a10e9ae0..000000000000
--- a/board/olimex/mx23_olinuxino/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MX23_OLINUXINO BOARD
-M: Marek Vasut <marek.va...@gmail.com>
-S: Maintained
-F: board/olimex/mx23_olinuxino/
-F: include/configs/mx23_olinuxino.h
-F: configs/mx23_olinuxino_defconfig
diff --git a/board/olimex/mx23_olinuxino/Makefile
b/board/olimex/mx23_olinuxino/Makefile
deleted file mode 100644
index b2ea89743440..000000000000
--- a/board/olimex/mx23_olinuxino/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-
-ifndef CONFIG_SPL_BUILD
-obj-y := mx23_olinuxino.o
-else
-obj-y := spl_boot.o
-endif
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c
b/board/olimex/mx23_olinuxino/mx23_olinuxino.c
deleted file mode 100644
index f13fdb8d47e7..000000000000
--- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Olimex MX23 Olinuxino board
- *
- * Copyright (C) 2013 Marek Vasut <ma...@denx.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx23.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#ifdef CONFIG_LED_STATUS
-#include <status_led.h>
-#endif
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
- /* IO0 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK0, 480000);
-
- /* SSP0 clock at 96MHz */
- mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_USB
-int board_ehci_hcd_init(int port)
-{
- /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */
- gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1);
- udelay(100);
- return 0;
-}
-
-int board_ehci_hcd_exit(int port)
-{
- /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */
- gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 0);
- return 0;
-}
-#endif
-
-int dram_init(void)
-{
- return mxs_dram_init();
-}
-
-#ifdef CONFIG_CMD_MMC
-static int mx23_olx_mmc_cd(int id)
-{
- return 1; /* Card always present */
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
- return mxsmmc_initialize(bis, 0, NULL, mx23_olx_mmc_cd);
-}
-#endif
-
-int board_init(void)
-{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
- status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_STATE);
-#endif
-
- return 0;
-}
diff --git a/board/olimex/mx23_olinuxino/spl_boot.c
b/board/olimex/mx23_olinuxino/spl_boot.c
deleted file mode 100644
index 248176c23cdc..000000000000
--- a/board/olimex/mx23_olinuxino/spl_boot.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Olimex MX23 Olinuxino Boot setup
- *
- * Copyright (C) 2013 Marek Vasut <ma...@denx.de>
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx23.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_SSP (MXS_PAD_8MA | MXS_PAD_PULLUP)
-
-const iomux_cfg_t iomux_setup[] = {
- /* DUART */
- MX23_PAD_PWM0__DUART_RX,
- MX23_PAD_PWM1__DUART_TX,
-
- /* EMI */
- MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI,
-
- MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
-
- MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
- MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
- MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
-
- /* Green LED */
- MX23_PAD_SSP1_DETECT__GPIO_2_1 |
- (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL),
-
- /* MMC 0 */
- MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP,
-
- /* Ethernet */
- MX23_PAD_GPMI_ALE__GPIO_0_17 |
- (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
-};
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
- mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
-
-/* Fine-tune the DRAM configuration. */
-void mxs_adjust_memory_params(uint32_t *dram_vals)
-{
- /* Enable Auto Precharge. */
- dram_vals[3] |= 1 << 8;
- /* Enable Fast Writes. */
- dram_vals[5] |= 1 << 8;
- /* tEMRS = 3*tCK */
- dram_vals[10] &= ~(0x3 << 8);
- dram_vals[10] |= (0x3 << 8);
- /* CASLAT = 3*tCK */
- dram_vals[11] &= ~(0x3 << 0);
- dram_vals[11] |= (0x3 << 0);
- /* tCKE = 1*tCK */
- dram_vals[12] &= ~(0x7 << 0);
- dram_vals[12] |= (0x1 << 0);
- /* CASLAT_LIN_GATE = 3*tCK , CASLAT_LIN = 3*tCK, tWTR=2*tCK */
- dram_vals[13] &= ~((0xf << 16) | (0xf << 24) | (0xf << 0));
- dram_vals[13] |= (0x6 << 16) | (0x6 << 24) | (0x2 << 0);
- /* tDAL = 6*tCK */
- dram_vals[15] &= ~(0xf << 16);
- dram_vals[15] |= (0x6 << 16);
- /* tREF = 1040*tCK */
- dram_vals[26] &= ~0xffff;
- dram_vals[26] |= 0x0410;
- /* tRAS_MAX = 9334*tCK */
- dram_vals[32] &= ~0xffff;
- dram_vals[32] |= 0x2475;
-}
diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig
deleted file mode 100644
index 0da54c9e7606..000000000000
--- a/configs/mx23_olinuxino_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX23=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x40000
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_MX23_OLINUXINO=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_MXS_GPIO=y
-CONFIG_LED_STATUS=y
-CONFIG_LED_STATUS_GPIO=y
-CONFIG_LED_STATUS0=y
-CONFIG_LED_STATUS_BIT=778
-CONFIG_LED_STATUS_STATE=2
-CONFIG_LED_STATUS_BOOT_ENABLE=y
-CONFIG_LED_STATUS_BOOT=0
-CONFIG_LED_STATUS_CMD=y
-CONFIG_MMC_MXS=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
deleted file mode 100644
index 2ee41aeff1b7..000000000000
--- a/include/configs/mx23_olinuxino.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Marek Vasut <ma...@denx.de>
- */
-#ifndef __CONFIGS_MX23_OLINUXINO_H__
-#define __CONFIGS_MX23_OLINUXINO_H__
-
-/* System configurations */
-#define CONFIG_MACH_TYPE 4105
-
-/* U-Boot Commands */
-
-/* Memory configuration */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-/* Status LED */
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#endif
-
-/* Ethernet */
-
-/* Booting Linux */
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_LOADADDR 0x42000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "update_sd_firmware_filename=u-boot.sd\0" \
- "update_sd_firmware=" /* Update the SD firmware partition */ \
- "if mmc rescan ; then " \
- "if tftp ${update_sd_firmware_filename} ; then " \
- "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
- "setexpr fw_sz ${fw_sz} + 1 ; " \
- "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
- "fi ; " \
- "fi\0" \
- "script=boot.scr\0" \
- "uimage=uImage\0" \
- "console=ttyAMA0\0" \
- "fdt_file=imx23-olinuxino.dtb\0" \
- "fdt_addr=0x41000000\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
- "mmcdev=0\0" \
- "mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootm; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootm; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "usb start; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${uimage}; " \
- "if test ${boot_fdt} = yes; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootm; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi;" \
- "fi; " \
- "else " \
- "bootm; " \
- "fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else run netboot; fi"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_MX23_OLINUXINO_H__ */
--
2.17.1
