> -----Original Message-----
> From: u-boot-boun...@lists.denx.de 
> [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Albert Aribaud
> Sent: Wednesday, September 08, 2010 11:01 PM
> To: u-boot@lists.denx.de
> Subject: [U-Boot] [PATCH V3] mvsata_ide: adjust port init sequence
> 
> mvsata_ide_initialize_port(): adjust init sequence (SStatus
> should be checked only after all writes to SControl) and
> return success/failure to ide_preinit().
> 
> Also, as some tests showed init durations in the hundreds
> of us, raise the time-out to 01 ms to be on the safe side.
> 
> Signed-off-by: Albert Aribaud <albert.arib...@free.fr>
> ---
> PATCH HISTORY
> 
> V1    Initial patch.
> V2    Fixed wrong placement of comment.
>       Fixed wrong description (was 01 ms, should have been 10).
>       Added Signed-off-by.
> V3    Replaced return status values with symbolic names.
>       Made error status values negative.
>       Renamed 'tout' to 'timeleft' for clarity.
>       Replaced ternary '?:' operator with '!' and if.
> 
> Patch was run through checkscript.pl with 0 errors and warnings.
> 
>  drivers/block/mvsata_ide.c |   42 
> +++++++++++++++++++++++++++++++++---------
>  1 files changed, 33 insertions(+), 9 deletions(-)
> 

Applied to u-boot-marvell.git master branch

Regards.
Prafulla . .
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to