Dear Stefan Roese, In message <201010111519.04457...@denx.de> you wrote: > > The Sequoia RAM-booting target has been created mainly for boards equipped > only with NAND flash (no NOR). This image can be loaded via a JTAG debugger > into RAM and started there. After this U-Boot can be used to initially > program > the NAND flash. To make porting easier for other PPC4xx NAND-only users, I > therefore removed NOR support from this RAM-booting image.
But the Sequoia board has both NOR and NAND, so we should support both. > I now see two possible solutions for the current compile breakage: > > a) Enable NOR again on sequoia_ramboot > b) Keep NOR disabled and remove CONFIG_FDT_FIXUP_NOR_FLASH_SIZE for > sequoia_ramboot As a) is way more useful to customers we should do that. > Just let me know which one you would prefer and I will send a patch for it. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de God grant me the senility to accept the things I cannot change, The frustration to try to change things I cannot affect, and the wisdom to tell the difference. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
