Hi Tom, please pull from u-boot-imx, thanks !
The following changes since commit 184aa6504143b452132e28cd3ebecc7b941cdfa1: Merge tag 'u-boot-rockchip-20210121' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip (2021-01-21 07:39:47 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git tags/u-boot-imx-20210125 for you to fetch changes up to 4f37aa957939937f9f5b472f829ab81ef13c479a: ARM: imx: add i.MX8MN lpddr4 image cfg file (2021-01-23 14:01:59 +0100) ---------------------------------------------------------------- Changes for 2020.04 ------------------- - new board: Phytec phyCORE-i.MX8MP i.MX8MN Beacon EmbeddedWorks devkit - Fixes: several nanbcb fixes fix for imx8mm_beacon - further switch to distro boot commands - DM: DM Ether for MX6UL CI: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6013 ---------------------------------------------------------------- Adam Ford (6): imx8mm_beacon: Enable fixed regulator in SPL imx: imx8mm-beacon: Remove relocation restrictions spi: nxp_fspi: Enable support for nxp,imx8mm-fspi imx8mm_beacon: Enable QSPI Support arm64: dts: imx8mm-beacon: Resync imx8mm-beacon-som with 5.11-rc4 imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Alice Guo (5): imx8mm: configs: add support for distro boot commands board: imx8mm: add boot.cmd for distro boot on iMX8MM imx8mp: configs: add support for distro boot commands board: imx8mp: add boot.cmd for distro boot on iMX8MP imx8mq: configs: add support for distro boot commands Han Xu (1): nandbcb: nand support for i.MX8MP Heiko Schocher (1): mmc: fsl_esdhc_imx.c: fix compiler warning Marc Ferland (2): arm: dart6ul: enable DM_ETH for the dart6ul arm: dart6ul: fix ddr size macro Marek Vasut (5): ARM: imx6: dh-imx6: Move bootcounter to SNVS_LPGDR clk: imx: Add ECSPI to iMX8MN spi: imx: Define register bits in the driver spi: imx: Use clock framework if enabled ARM: imx: add i.MX8MN lpddr4 image cfg file Martin Fuzzey (1): w1: mxc: fix build Peng Fan (11): imx: imx8mp_evk: enable eth support imx: imx8mn_ddr4_evk: Use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board imx: imx8mn_evk: correct stack/malloc adress arm: dts: imx8mn: sync dts from Linux Kernel imx8m: clock: add type of set_clk_eqos arm: dts: imx8mp: sync dts from Linux Kernel arm: dts: imx8mm: sync dts from Linux Kernel arm: dts: imx8mq: sync dts from Linux Kernel imx8m: lowlevel_init: tune alignment imx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFF imx8m: add QSPI boot dev Sean Anderson (1): mx6ul(l)evk: Enable DM_ETH_PHY Teresa Remmet (1): board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP support Ye Li (9): imx: ddr: imx8m: Move selfref_en after DDR scrub nandbcb: Fix uninitialized variable imx: nandbcb: Fix resource leak imx: nandbcb: Fix resource leak in read_fcb imx: nandbcb: Fix potential overflow in fill_dbbt_data imx: nandbcb: Fix potential overflow in nandbcb_set_boot_config imx: Fix market segment fuse offset on iMX8MP imx6: Remove AHCI device before boot OS imx: timer: Modify GPT timer driver for mx7 arch/arm/dts/Makefile | 2 + arch/arm/dts/imx6ull-dart-6ul.dts | 48 ++++ arch/arm/dts/imx6ull-dart-6ul.dtsi | 57 ++--- arch/arm/dts/imx8mm-beacon-som.dtsi | 326 +++++++++++++++----------- arch/arm/dts/imx8mm-evk.dts | 534 ++++++------------------------------------ arch/arm/dts/imx8mm-evk.dtsi | 489 ++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx8mm.dtsi | 53 ++++- arch/arm/dts/imx8mn-beacon-baseboard.dtsi | 236 +++++++++++++++++++ arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi | 122 ++++++++++ arch/arm/dts/imx8mn-beacon-kit.dts | 19 ++ arch/arm/dts/imx8mn-beacon-som.dtsi | 405 ++++++++++++++++++++++++++++++++ arch/arm/dts/imx8mn-ddr4-evk.dts | 321 ++++++++++--------------- arch/arm/dts/imx8mn-evk.dtsi | 360 ++++++++++++++++++++++++++++ arch/arm/dts/imx8mn-pinfunc.h | 1266 +++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------- arch/arm/dts/imx8mn.dtsi | 411 +++++++++++++++++++++++++++----- arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 + arch/arm/dts/imx8mp-evk.dts | 117 +++++++++- arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 114 +++++++++ arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 161 +++++++++++++ arch/arm/dts/imx8mp-phycore-som.dtsi | 293 +++++++++++++++++++++++ arch/arm/dts/imx8mp-pinfunc.h | 360 +++++++++------------------- arch/arm/dts/imx8mp.dtsi | 234 +++++++++++++++++-- arch/arm/dts/imx8mq-evk.dts | 186 ++++++++++++--- arch/arm/dts/imx8mq-pinfunc.h | 623 +++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx8mq.dtsi | 302 ++++++++++++++++++++++-- arch/arm/include/asm/arch-imx8m/clock.h | 1 + arch/arm/include/asm/arch-imx8m/imx-regs.h | 2 + arch/arm/include/asm/arch-mx25/imx-regs.h | 30 --- arch/arm/include/asm/arch-mx31/imx-regs.h | 31 --- arch/arm/include/asm/arch-mx35/imx-regs.h | 30 --- arch/arm/include/asm/arch-mx5/imx-regs.h | 36 --- arch/arm/include/asm/arch-mx6/imx-regs.h | 36 --- arch/arm/include/asm/arch-mx7/imx-regs.h | 37 --- arch/arm/mach-imx/cmd_nandbcb.c | 34 +-- arch/arm/mach-imx/cpu.c | 30 ++- arch/arm/mach-imx/imx8m/Kconfig | 16 +- arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg | 17 ++ arch/arm/mach-imx/imx8m/lowlevel_init.S | 2 +- arch/arm/mach-imx/spl.c | 2 + arch/arm/mach-imx/timer.c | 16 +- board/beacon/imx8mn/Kconfig | 18 ++ board/beacon/imx8mn/MAINTAINERS | 6 + board/beacon/imx8mn/Makefile | 13 ++ board/beacon/imx8mn/README | 39 ++++ board/beacon/imx8mn/imx8mn_beacon.c | 56 +++++ board/beacon/imx8mn/lpddr4_timing.c | 1434 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/beacon/imx8mn/spl.c | 128 ++++++++++ board/freescale/imx8mm_evk/boot.cmd | 35 +++ board/freescale/imx8mn_evk/Kconfig | 2 +- board/freescale/imx8mp_evk/boot.cmd | 25 ++ board/freescale/imx8mp_evk/imx8mp_evk.c | 65 +++++- board/phytec/phycore_imx8mp/Kconfig | 12 + board/phytec/phycore_imx8mp/MAINTAINERS | 9 + board/phytec/phycore_imx8mp/Makefile | 11 + board/phytec/phycore_imx8mp/lpddr4_timing.c | 1849 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/phytec/phycore_imx8mp/phycore-imx8mp.c | 39 ++++ board/phytec/phycore_imx8mp/spl.c | 129 ++++++++++ board/variscite/dart_6ul/dart_6ul.c | 76 +----- board/variscite/dart_6ul/spl.c | 3 - configs/dh_imx6_defconfig | 5 +- configs/imx8mm_beacon_defconfig | 11 +- configs/imx8mm_evk_defconfig | 2 + configs/imx8mn_beacon_defconfig | 132 +++++++++++ configs/imx8mn_ddr4_evk_defconfig | 2 +- configs/imx8mp_evk_defconfig | 11 +- configs/imx8mq_evk_defconfig | 1 + configs/mx6ul_14x14_evk_defconfig | 1 + configs/mx6ul_9x9_evk_defconfig | 1 + configs/mx6ull_14x14_evk_defconfig | 1 + configs/mx6ull_14x14_evk_plugin_defconfig | 1 + configs/phycore-imx8mp_defconfig | 95 ++++++++ configs/variscite_dart6ul_defconfig | 2 +- drivers/clk/imx/clk-imx8mn.c | 29 +++ drivers/ddr/imx/imx8m/ddr_init.c | 5 +- drivers/mmc/fsl_esdhc_imx.c | 2 + drivers/power/power_i2c.c | 8 +- drivers/spi/mxc_spi.c | 88 +++++++ drivers/spi/nxp_fspi.c | 9 + drivers/w1/mxc_w1.c | 2 +- include/configs/dart_6ul.h | 7 - include/configs/imx8mm_beacon.h | 2 - include/configs/imx8mm_evk.h | 64 +---- include/configs/imx8mn_beacon.h | 155 ++++++++++++ include/configs/imx8mn_evk.h | 9 +- include/configs/imx8mp_evk.h | 81 +++---- include/configs/imx8mq_evk.h | 75 +----- include/configs/phycore_imx8mp.h | 107 +++++++++ include/dt-bindings/clock/imx8mn-clock.h | 30 ++- include/dt-bindings/clock/imx8mp-clock.h | 95 +++++++- include/dt-bindings/clock/imx8mq-clock.h | 31 ++- 90 files changed, 10029 insertions(+), 2347 deletions(-) create mode 100644 arch/arm/dts/imx8mm-evk.dtsi create mode 100644 arch/arm/dts/imx8mn-beacon-baseboard.dtsi create mode 100644 arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-beacon-kit.dts create mode 100644 arch/arm/dts/imx8mn-beacon-som.dtsi create mode 100644 arch/arm/dts/imx8mn-evk.dtsi create mode 100644 arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts create mode 100644 arch/arm/dts/imx8mp-phycore-som.dtsi create mode 100644 arch/arm/dts/imx8mq-pinfunc.h create mode 100644 arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg create mode 100644 board/beacon/imx8mn/Kconfig create mode 100644 board/beacon/imx8mn/MAINTAINERS create mode 100644 board/beacon/imx8mn/Makefile create mode 100644 board/beacon/imx8mn/README create mode 100644 board/beacon/imx8mn/imx8mn_beacon.c create mode 100644 board/beacon/imx8mn/lpddr4_timing.c create mode 100644 board/beacon/imx8mn/spl.c create mode 100644 board/freescale/imx8mm_evk/boot.cmd create mode 100644 board/freescale/imx8mp_evk/boot.cmd create mode 100644 board/phytec/phycore_imx8mp/Kconfig create mode 100644 board/phytec/phycore_imx8mp/MAINTAINERS create mode 100644 board/phytec/phycore_imx8mp/Makefile create mode 100644 board/phytec/phycore_imx8mp/lpddr4_timing.c create mode 100644 board/phytec/phycore_imx8mp/phycore-imx8mp.c create mode 100644 board/phytec/phycore_imx8mp/spl.c create mode 100644 configs/imx8mn_beacon_defconfig create mode 100644 configs/phycore-imx8mp_defconfig create mode 100644 include/configs/imx8mn_beacon.h create mode 100644 include/configs/phycore_imx8mp.h Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================
