In case of reading large area and memory-map mode is misconfigured
(memory-map size declared lower than the real size of the memory chip)
watchdog can be triggered.
Add WATCHDOG_RESET() in _stm32_qspi_read_fifo to fix it.
Issue reproduced with stm32mp157c-ev1 board and memory map size set to
1, with following command:
sf read 0xC0000000 0 0x4000000
Signed-off-by: Patrice Chotard <patrice.chot...@foss.st.com>
---
drivers/spi/stm32_qspi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/stm32_qspi.c b/drivers/spi/stm32_qspi.c
index 958c394a1a..c3da17f991 100644
--- a/drivers/spi/stm32_qspi.c
+++ b/drivers/spi/stm32_qspi.c
@@ -11,6 +11,7 @@
#include <clk.h>
#include <reset.h>
#include <spi-mem.h>
+#include <watchdog.h>
#include <linux/iopoll.h>
#include <linux/ioport.h>
#include <linux/sizes.h>
@@ -163,6 +164,7 @@ static int _stm32_qspi_wait_cmd(struct stm32_qspi_priv
*priv,
static void _stm32_qspi_read_fifo(u8 *val, void __iomem *addr)
{
*val = readb(addr);
+ WATCHDOG_RESET();
}
static void _stm32_qspi_write_fifo(u8 *val, void __iomem *addr)
--
2.17.1
