> -----Original Message-----
> From: ChiaWei Wang <chiawei_w...@aspeedtech.com>
> Sent: Monday, December 14, 2020 1:54 PM
> To: tr...@konsulko.com; u-boot@lists.denx.de; Ryan Chen
> <ryan_c...@aspeedtech.com>
> Cc: BMC-SW <bmc...@aspeedtech.com>
> Subject: [PATCH 6/7] aspeed: Add AST2600 platform support
>
> Add low level platform initialization for the AST2600 SoC.
> The 2-stage booting with U-Boot SPL are leveraged to support different booting
> mode.
>
> However, currently the patch supports only the booting from memory-mapped
> SPI flash.
>
> Signed-off-by: Chia-Wei, Wang <chiawei_w...@aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_c...@aspeedtech.com>
> ---
> arch/arm/include/asm/arch-aspeed/boot0.h | 23 ++
> arch/arm/include/asm/arch-aspeed/platform.h | 5 +
> arch/arm/mach-aspeed/Kconfig | 20 ++
> arch/arm/mach-aspeed/Makefile | 1 +
> arch/arm/mach-aspeed/ast2600/Kconfig | 17 ++
> arch/arm/mach-aspeed/ast2600/Makefile | 2 +
> arch/arm/mach-aspeed/ast2600/board_common.c | 105 +++++++++
> arch/arm/mach-aspeed/ast2600/lowlevel_init.S | 233 +++++++++++++++++++
> arch/arm/mach-aspeed/ast2600/spl.c | 55 +++++
> board/aspeed/evb_ast2600/Kconfig | 12 +
> board/aspeed/evb_ast2600/Makefile | 1 +
> board/aspeed/evb_ast2600/evb_ast2600.c | 5 +
> drivers/sysreset/sysreset_ast.c | 5 +
> include/configs/evb_ast2600.h | 16 ++
> 14 files changed, 500 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-aspeed/boot0.h
> create mode 100644 arch/arm/mach-aspeed/ast2600/Kconfig
> create mode 100644 arch/arm/mach-aspeed/ast2600/Makefile
> create mode 100644 arch/arm/mach-aspeed/ast2600/board_common.c
> create mode 100644 arch/arm/mach-aspeed/ast2600/lowlevel_init.S
> create mode 100644 arch/arm/mach-aspeed/ast2600/spl.c
> create mode 100644 board/aspeed/evb_ast2600/Kconfig create mode
> 100644 board/aspeed/evb_ast2600/Makefile create mode 100644
> board/aspeed/evb_ast2600/evb_ast2600.c
> create mode 100644 include/configs/evb_ast2600.h
>
> diff --git a/arch/arm/include/asm/arch-aspeed/boot0.h
> b/arch/arm/include/asm/arch-aspeed/boot0.h
> new file mode 100644
> index 0000000000..368becc87a
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-aspeed/boot0.h
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (c) Aspeed Technology Inc.
> + */
> +
> +#ifndef _ASM_ARCH_BOOT0_H
> +#define _ASM_ARCH_BOOT0_H
> +
> +_start:
> + ARM_VECTORS
> +
> + .word 0x0 /* key location */
> + .word 0x0 /* start address of image */
> + .word 0xfc00 /* maximum image size: 63KB */
> + .word 0x0 /* signature address */
> + .word 0x0 /* header revision ID low */
> + .word 0x0 /* header revision ID high */
> + .word 0x0 /* reserved */
> + .word 0x0 /* checksum */
> + .word 0x0 /* BL2 secure header */
> + .word 0x0 /* public key or digest offset for BL2 */
> +
> +#endif
> diff --git a/arch/arm/include/asm/arch-aspeed/platform.h
> b/arch/arm/include/asm/arch-aspeed/platform.h
> index 6cee036f54..d50ec5f8a9 100644
> --- a/arch/arm/include/asm/arch-aspeed/platform.h
> +++ b/arch/arm/include/asm/arch-aspeed/platform.h
> @@ -13,6 +13,11 @@
> #define ASPEED_DRAM_BASE 0x80000000
> #define ASPEED_SRAM_BASE 0x1e720000
> #define ASPEED_SRAM_SIZE 0x9000
> +#elif defined(CONFIG_ASPEED_AST2600)
> +#define ASPEED_MAC_COUNT 4
> +#define ASPEED_DRAM_BASE 0x80000000
> +#define ASPEED_SRAM_BASE 0x10000000
> +#define ASPEED_SRAM_SIZE 0x10000
> #else
> #err "Unrecognized Aspeed platform."
> #endif
> diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
> index 4f021baa06..9a725f195a 100644
> --- a/arch/arm/mach-aspeed/Kconfig
> +++ b/arch/arm/mach-aspeed/Kconfig
> @@ -9,6 +9,11 @@ config SYS_SOC
> config SYS_TEXT_BASE
> default 0x00000000
>
> +choice
> + prompt "Aspeed SoC select"
> + depends on ARCH_ASPEED
> + default ASPEED_AST2500
> +
> config ASPEED_AST2500
> bool "Support Aspeed AST2500 SoC"
> depends on DM_RESET
> @@ -18,6 +23,21 @@ config ASPEED_AST2500
> It is used as Board Management Controller on many server boards,
> which is enabled by support of LPC and eSPI peripherals.
>
> +config ASPEED_AST2600
> + bool "Support Aspeed AST2600 SoC"
> + select CPU_V7A
> + select CPU_V7_HAS_NONSEC
> + select SYS_ARCH_TIMER
> + select SUPPORT_SPL
> + select ENABLE_ARM_SOC_BOOT0_HOOK
> + help
> + The Aspeed AST2600 is a ARM-based SoC with Cortex-A7 CPU.
> + It is used as Board Management Controller on many server boards,
> + which is enabled by support of LPC and eSPI peripherals.
> +
> +endchoice
> +
> source "arch/arm/mach-aspeed/ast2500/Kconfig"
> +source "arch/arm/mach-aspeed/ast2600/Kconfig"
>
> endif
> diff --git a/arch/arm/mach-aspeed/Makefile
> b/arch/arm/mach-aspeed/Makefile index 33f65b50b2..42599c125b 100644
> --- a/arch/arm/mach-aspeed/Makefile
> +++ b/arch/arm/mach-aspeed/Makefile
> @@ -4,3 +4,4 @@
>
> obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
> obj-$(CONFIG_ASPEED_AST2500) += ast2500/
> +obj-$(CONFIG_ASPEED_AST2600) += ast2600/
> diff --git a/arch/arm/mach-aspeed/ast2600/Kconfig
> b/arch/arm/mach-aspeed/ast2600/Kconfig
> new file mode 100644
> index 0000000000..f3a53387a1
> --- /dev/null
> +++ b/arch/arm/mach-aspeed/ast2600/Kconfig
> @@ -0,0 +1,17 @@
> +if ASPEED_AST2600
> +
> +config SYS_CPU
> + default "armv7"
> +
> +config TARGET_EVB_AST2600
> + bool "EVB-AST2600"
> + depends on ASPEED_AST2600
> + help
> + EVB-AST2600 is Aspeed evaluation board for AST2600A0 chip.
> + It has 512M of RAM, 32M of SPI flash, two Ethernet ports,
> + 4 Serial ports, 4 USB ports, VGA port, PCIe, SD card slot,
> + 20 pin JTAG, pinouts for 14 I2Cs, 3 SPIs and eSPI, 8 PWMs.
> +
> +source "board/aspeed/evb_ast2600/Kconfig"
> +
> +endif
> diff --git a/arch/arm/mach-aspeed/ast2600/Makefile
> b/arch/arm/mach-aspeed/ast2600/Makefile
> new file mode 100644
> index 0000000000..448d3201af
> --- /dev/null
> +++ b/arch/arm/mach-aspeed/ast2600/Makefile
> @@ -0,0 +1,2 @@
> +obj-y += lowlevel_init.o board_common.o
> +obj-$(CONFIG_SPL_BUILD) += spl.o
> diff --git a/arch/arm/mach-aspeed/ast2600/board_common.c
> b/arch/arm/mach-aspeed/ast2600/board_common.c
> new file mode 100644
> index 0000000000..642ea48d8e
> --- /dev/null
> +++ b/arch/arm/mach-aspeed/ast2600/board_common.c
> @@ -0,0 +1,105 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) Aspeed Technology Inc.
> + */
> +#include <common.h>
> +#include <dm.h>
> +#include <ram.h>
> +#include <timer.h>
> +#include <asm/io.h>
> +#include <asm/arch/timer.h>
> +#include <linux/bitops.h>
> +#include <linux/err.h>
> +#include <dm/uclass.h>
> +#include <asm/arch/scu_ast2600.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* Memory Control registers */
> +#define MCR_BASE 0x1e6e0000
> +#define MCR_CONF (MCR_BASE + 0x004)
> +
> +/* bit fields of MCR_CONF */
> +#define MCR_CONF_ECC_EN BIT(7)
> +#define MCR_CONF_VGA_MEMSZ_MASK GENMASK(3, 2)
> +#define MCR_CONF_VGA_MEMSZ_SHIFT 2
> +#define MCR_CONF_MEMSZ_MASK GENMASK(1, 0)
> +#define MCR_CONF_MEMSZ_SHIFT 0
> +
> +int dram_init(void)
> +{
> + int ret;
> + struct udevice *dev;
> + struct ram_info ram;
> +
> + ret = uclass_get_device(UCLASS_RAM, 0, &dev);
> + if (ret) {
> + debug("cannot get DRAM driver\n");
> + return ret;
> + }
> +
> + ret = ram_get_info(dev, &ram);
> + if (ret) {
> + debug("cannot get DRAM information\n");
> + return ret;
> + }
> +
> + gd->ram_size = ram.size;
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + int i = 0, rc;
> + struct udevice *dev;
> +
> + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
> +
> + while (1) {
> + rc = uclass_get_device(UCLASS_MISC, i++, &dev);
> + if (rc)
> + break;
> + }
> +
> + return 0;
> +}
> +
> +void board_add_ram_info(int use_default) {
> + int rc;
> + uint32_t conf;
> + uint32_t ecc, act_size, vga_rsvd;
> + struct udevice *scu_dev;
> + struct ast2600_scu *scu;
> +
> + rc = uclass_get_device_by_driver(UCLASS_CLK,
> + DM_GET_DRIVER(aspeed_ast2600_scu),
> &scu_dev);
> + if (rc) {
> + debug("%s: cannot find SCU device, rc=%d\n", __func__, rc);
> + return;
> + }
> +
> + scu = devfdt_get_addr_ptr(scu_dev);
> + if (IS_ERR_OR_NULL(scu)) {
> + debug("%s: cannot get SCU address pointer\n", __func__);
> + return;
> + }
> +
> + conf = readl(MCR_CONF);
> +
> + ecc = conf & MCR_CONF_ECC_EN;
> + act_size = 0x100 << ((conf & MCR_CONF_MEMSZ_MASK) >>
> MCR_CONF_MEMSZ_SHIFT);
> + vga_rsvd = 0x8 << ((conf & MCR_CONF_VGA_MEMSZ_MASK) >>
> +MCR_CONF_VGA_MEMSZ_SHIFT);
> +
> + /* no VGA reservation if efuse VGA disable bit is set */
> + if (readl(scu->efuse) & SCU_EFUSE_DIS_VGA)
> + vga_rsvd = 0;
> +
> + printf(" (capacity:%d MiB, VGA:%d MiB), ECC %s", act_size,
> + vga_rsvd, (ecc) ? "on" : "off"); }
> +
> +void enable_caches(void)
> +{
> + /* get rid of the warning message */
> +}
> diff --git a/arch/arm/mach-aspeed/ast2600/lowlevel_init.S
> b/arch/arm/mach-aspeed/ast2600/lowlevel_init.S
> new file mode 100644
> index 0000000000..594963d039
> --- /dev/null
> +++ b/arch/arm/mach-aspeed/ast2600/lowlevel_init.S
> @@ -0,0 +1,233 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) ASPEED Technology Inc.
> + */
> +#include <config.h>
> +#include <asm/armv7.h>
> +#include <linux/linkage.h>
> +#include <asm/arch/scu_ast2600.h>
> +
> +/* SCU register offsets */
> +#define SCU_BASE 0x1e6e2000
> +#define SCU_PROT_KEY1 (SCU_BASE + 0x000)
> +#define SCU_PROT_KEY2 (SCU_BASE + 0x010)
> +#define SCU_SMP_BOOT (SCU_BASE + 0x180)
> +#define SCU_HWSTRAP1 (SCU_BASE + 0x510)
> +#define SCU_CA7_PARITY_CHK (SCU_BASE + 0x820)
> +#define SCU_CA7_PARITY_CLR (SCU_BASE + 0x824)
> +#define SCU_MMIO_DEC (SCU_BASE + 0xc24)
> +
> +/* FMC SPI register offsets */
> +#define FMC_BASE 0x1e620000
> +#define FMC_CE0_CTRL (FMC_BASE + 0x010)
> +#define FMC_SW_RST_CTRL (FMC_BASE + 0x050)
> +#define FMC_WDT1_CTRL_MODE (FMC_BASE + 0x060)
> +#define FMC_WDT2_CTRL_MODE (FMC_BASE + 0x064)
> +
> +/*
> + * The SMP mailbox provides a space with few instructions in it
> + * for secondary cores to execute on and wait for the signal of
> + * SMP core bring up.
> + *
> + * SMP mailbox
> + * +----------------------+
> + * | |
> + * | mailbox insn. for |
> + * | cpuN polling SMP go |
> + * | |
> + * +----------------------+ 0xC
> + * | mailbox ready signal |
> + * +----------------------+ 0x8
> + * | cpuN GO signal |
> + * +----------------------+ 0x4
> + * | cpuN entrypoint |
> + * +----------------------+ SMP_MAILBOX_BASE */
> +#define SMP_MBOX_BASE (SCU_SMP_BOOT)
> +#define SMP_MBOX_FIELD_ENTRY (SMP_MBOX_BASE + 0x0)
> +#define SMP_MBOX_FIELD_GOSIGN (SMP_MBOX_BASE + 0x4)
> +#define SMP_MBOX_FIELD_READY (SMP_MBOX_BASE + 0x8)
> +#define SMP_MBOX_FIELD_POLLINSN (SMP_MBOX_BASE + 0xc)
> +
> +.macro scu_unlock
> + movw r0, #(SCU_UNLOCK_KEY & 0xffff)
> + movt r0, #(SCU_UNLOCK_KEY >> 16)
> +
> + ldr r1, =SCU_PROT_KEY1
> + str r0, [r1]
> + ldr r1, =SCU_PROT_KEY2
> + str r0, [r1]
> +.endm
> +
> +.macro timer_init
> + ldr r1, =SCU_HWSTRAP1
> + ldr r1, [r1]
> + and r1, #0x700
> + lsr r1, #0x8
> +
> + /* 1.2GHz */
> + cmp r1, #0x0
> + movweq r0, #0x8c00
> + movteq r0, #0x4786
> +
> + /* 1.6GHz */
> + cmp r1, #0x1
> + movweq r0, #0x1000
> + movteq r0, #0x5f5e
> +
> + /* 1.2GHz */
> + cmp r1, #0x2
> + movweq r0, #0x8c00
> + movteq r0, #0x4786
> +
> + /* 1.6GHz */
> + cmp r1, #0x3
> + movweq r0, #0x1000
> + movteq r0, #0x5f5e
> +
> + /* 800MHz */
> + cmp r1, #0x4
> + movwge r0, #0x0800
> + movtge r0, #0x2faf
> +
> + mcr p15, 0, r0, c14, c0, 0 @; update CNTFRQ
> +.endm
> +
> +
> +.globl lowlevel_init
> +
> +lowlevel_init:
> +#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
> + mov pc, lr
> +#else
> + /* setup ARM arch timer frequency */
> + timer_init
> +
> + /* reset SMP mailbox as early as possible */
> + mov r0, #0x0
> + ldr r1, =SMP_MBOX_FIELD_READY
> + str r0, [r1]
> +
> + /* set ACTLR.SMP to enable cache use */
> + mrc p15, 0, r0, c1, c0, 1
> + orr r0, #0x40
> + mcr p15, 0, r0, c1, c0, 1
> +
> + /*
> + * we treat cpu0 as the primary core and
> + * put secondary core (cpuN) to sleep
> + */
> + mrc p15, 0, r0, c0, c0, 5 @; Read CPU ID register
> + ands r0, #0xff @; Mask off, leaving the CPU ID field
> + movw r2, #0xab00
> + movt r2, #0xabba
> + orr r2, r0
> +
> + beq do_primary_core_setup
> +
> + /* hold cpuN until mailbox is ready */
> +poll_mailbox_ready:
> + wfe
> + ldr r0, =SMP_MBOX_FIELD_READY
> + ldr r0, [r0]
> + movw r1, #0xcafe
> + movt r1, #0xbabe
> + cmp r1, r0
> + bne poll_mailbox_ready
> +
> + /* parameters for relocated SMP go polling insn. */
> + ldr r0, =SMP_MBOX_FIELD_GOSIGN
> + ldr r1, =SMP_MBOX_FIELD_ENTRY
> +
> + /* no return */
> + ldr pc, =SMP_MBOX_FIELD_POLLINSN
> +
> +do_primary_core_setup:
> + scu_unlock
> +
> + /* MMIO decode setting */
> + ldr r0, =SCU_MMIO_DEC
> + mov r1, #0x2000
> + str r1, [r0]
> +
> + /* enable CA7 cache parity check */
> + mov r0, #0
> + ldr r1, =SCU_CA7_PARITY_CLR
> + str r0, [r1]
> +
> + mov r0, #0x1
> + ldr r1, =SCU_CA7_PARITY_CHK
> + str r0, [r1]
> +
> + /* do not fill FMC50[1] if boot from eMMC */
> + ldr r0, =SCU_HWSTRAP1
> + ldr r1, [r0]
> + ands r1, #0x04
> + bne skip_fill_wip_bit
> +
> + /* fill FMC50[1] for waiting WIP idle */
> + mov r0, #0x02
> + ldr r1, =FMC_SW_RST_CTRL
> + str r0, [r1]
> +
> +skip_fill_wip_bit:
> + /* disable FMC WDT for SPI address mode detection */
> + mov r0, #0
> + ldr r1, =FMC_WDT1_CTRL_MODE
> + str r0, [r1]
> +
> + /* relocate mailbox insn. for cpuN polling SMP go signal */
> + adrl r0, mailbox_insn
> + adrl r1, mailbox_insn_end
> +
> + ldr r2, =#SMP_MBOX_FIELD_POLLINSN
> +
> +relocate_mailbox_insn:
> + ldr r3, [r0], #0x4
> + str r3, [r2], #0x4
> + cmp r0, r1
> + bne relocate_mailbox_insn
> +
> + /* reset SMP go sign */
> + mov r0, #0
> + ldr r1, =SMP_MBOX_FIELD_GOSIGN
> + str r0, [r1]
> +
> + /* notify cpuN mailbox is ready */
> + movw r0, #0xCAFE
> + movt r0, #0xBABE
> + ldr r1, =SMP_MBOX_FIELD_READY
> + str r0, [r1]
> + sev
> +
> + /* back to arch calling code */
> + mov pc, lr
> +
> +/*
> + * insn. inside mailbox to poll SMP go signal.
> + *
> + * Note that as this code will be relocated, any
> + * pc-relative assembly should NOT be used.
> + */
> +mailbox_insn:
> + /*
> + * r0 ~ r3 are parameters:
> + * r0 = SMP_MBOX_FIELD_GOSIGN
> + * r1 = SMP_MBOX_FIELD_ENTRY
> + * r2 = per-cpu go sign value
> + * r3 = no used now
> + */
> +poll_mailbox_smp_go:
> + wfe
> + ldr r4, [r0]
> + cmp r2, r4
> + bne poll_mailbox_smp_go
> +
> + /* SMP GO signal confirmed, release cpuN */
> + ldr pc, [r1]
> +
> +mailbox_insn_end:
> + /* should never reach */
> + b .
> +
> +#endif
> diff --git a/arch/arm/mach-aspeed/ast2600/spl.c
> b/arch/arm/mach-aspeed/ast2600/spl.c
> new file mode 100644
> index 0000000000..9201d4a4d4
> --- /dev/null
> +++ b/arch/arm/mach-aspeed/ast2600/spl.c
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) Aspeed Technology Inc.
> + */
> +#include <common.h>
> +#include <debug_uart.h>
> +#include <dm.h>
> +#include <spl.h>
> +#include <init.h>
> +#include <asm/io.h>
> +#include <asm/arch/scu_ast2600.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void board_init_f(ulong dummy)
> +{
> + spl_early_init();
> + preloader_console_init();
> + timer_init();
> + dram_init();
> +}
> +
> +u32 spl_boot_device(void)
> +{
> + return BOOT_DEVICE_RAM;
> +}
> +
> +struct image_header *spl_get_load_buffer(ssize_t offset, size_t size) {
> + /*
> + * When boot from SPI, AST2600 already remap 0x00000000 ~ 0x0fffffff
> + * to BMC SPI memory space 0x20000000 ~ 0x2fffffff. The next stage BL
> + * has been located in SPI for XIP. In this case, the load buffer for
> + * SPL image loading will be set to the remapped address of the next
> + * BL instead of the DRAM space CONFIG_SYS_LOAD_ADDR
> + */
> + return (struct image_header *)(CONFIG_SYS_TEXT_BASE); }
> +
> +#ifdef CONFIG_SPL_OS_BOOT
> +int spl_start_uboot(void)
> +{
> + /* boot linux */
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_SPL_LOAD_FIT
> +int board_fit_config_name_match(const char *name) {
> + /* just empty function now - can't decide what to choose */
> + debug("%s: %s\n", __func__, name);
> + return 0;
> +}
> +#endif
> diff --git a/board/aspeed/evb_ast2600/Kconfig
> b/board/aspeed/evb_ast2600/Kconfig
> new file mode 100644
> index 0000000000..42008cd033
> --- /dev/null
> +++ b/board/aspeed/evb_ast2600/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_EVB_AST2600
> +
> +config SYS_BOARD
> + default "evb_ast2600"
> +
> +config SYS_VENDOR
> + default "aspeed"
> +
> +config SYS_CONFIG_NAME
> + default "evb_ast2600"
> +
> +endif
> diff --git a/board/aspeed/evb_ast2600/Makefile
> b/board/aspeed/evb_ast2600/Makefile
> new file mode 100644
> index 0000000000..9291db6ee1
> --- /dev/null
> +++ b/board/aspeed/evb_ast2600/Makefile
> @@ -0,0 +1 @@
> +obj-y += evb_ast2600.o
> diff --git a/board/aspeed/evb_ast2600/evb_ast2600.c
> b/board/aspeed/evb_ast2600/evb_ast2600.c
> new file mode 100644
> index 0000000000..e6dc8c7952
> --- /dev/null
> +++ b/board/aspeed/evb_ast2600/evb_ast2600.c
> @@ -0,0 +1,5 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) Aspeed Technology Inc.
> + */
> +#include <common.h>
> diff --git a/drivers/sysreset/sysreset_ast.c b/drivers/sysreset/sysreset_ast.c
> index ee941c7770..d747ed00a7 100644
> --- a/drivers/sysreset/sysreset_ast.c
> +++ b/drivers/sysreset/sysreset_ast.c
> @@ -12,6 +12,7 @@
> #include <asm/io.h>
> #include <asm/arch/wdt.h>
> #include <linux/err.h>
> +#include <hang.h>
>
> static int ast_sysreset_request(struct udevice *dev, enum sysreset_t type)
> { @@ -33,11 +34,15 @@ static int ast_sysreset_request(struct udevice *dev,
> enum sysreset_t type)
> return -EPROTONOSUPPORT;
> }
>
> +#if !defined(CONFIG_SPL_BUILD)
> ret = wdt_expire_now(wdt, reset_mode);
> if (ret) {
> debug("Sysreset failed: %d", ret);
> return ret;
> }
> +#else
> + hang();
> +#endif
>
> return -EINPROGRESS;
> }
> diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h
> new file mode 100644 index 0000000000..e7975bf66d
> --- /dev/null
> +++ b/include/configs/evb_ast2600.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (c) Aspeed Technology Inc.
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <configs/aspeed-common.h>
> +
> +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
> +
> +/* Memory Info */
> +#define CONFIG_SYS_LOAD_ADDR 0x83000000
> +
> +#endif /* __CONFIG_H */
> --
> 2.17.1
