Similar to usbboot, add command line to boot from raw mmc partition
using common_diskboot(), which supports legacy or FIT images.
Usage:
mmcboot [loadAaddr] [dev:part]
Where [loadAddr] defaults to CONFIG_SYS_LOAD_ADDR, and [dev:part]
defaults to ${bootdevice}.
Also fixing config macro usage for CONFIG_SUPPORT_EMMC_BOOT (suggested
by checkpatch.pl).
Signed-off-by: Ravik Hasija <raha...@linux.microsoft.com>
Signed-off-by: Dhananjay Phadke <dpha...@linux.microsoft.com>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>
Reviewed-by: Simon Glass <s...@chromium.org>
---
v2:
* Fixed build failure.
* Updated syntax of mmcboot cmd.
---
cmd/Makefile | 2 +-
cmd/mmc.c | 22 +++++++++++++++++++---
2 files changed, 20 insertions(+), 4 deletions(-)
diff --git a/cmd/Makefile b/cmd/Makefile
index dd86675bf2..573e4776f5 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -97,7 +97,7 @@ obj-$(CONFIG_CMD_MII) += mii.o
obj-$(CONFIG_CMD_MISC) += misc.o
obj-$(CONFIG_CMD_MDIO) += mdio.o
obj-$(CONFIG_CMD_SLEEP) += sleep.o
-obj-$(CONFIG_CMD_MMC) += mmc.o
+obj-$(CONFIG_CMD_MMC) += mmc.o disk.o
obj-$(CONFIG_CMD_OPTEE_RPMB) += optee_rpmb.o
obj-$(CONFIG_MP) += mp.o
obj-$(CONFIG_CMD_MTD) += mtd.o
diff --git a/cmd/mmc.c b/cmd/mmc.c
index 1529a3e05d..0c3ed6c108 100644
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -711,7 +711,7 @@ static int do_mmc_hwpartition(struct cmd_tbl *cmdtp, int
flag,
}
#endif
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
+#if CONFIG_IS_ENABLED(SUPPORT_EMMC_BOOT)
static int do_mmc_bootbus(struct cmd_tbl *cmdtp, int flag,
int argc, char *const argv[])
{
@@ -950,7 +950,7 @@ static struct cmd_tbl cmd_mmc[] = {
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
U_BOOT_CMD_MKENT(hwpartition, 28, 0, do_mmc_hwpartition, "", ""),
#endif
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
+#if CONFIG_IS_ENABLED(SUPPORT_EMMC_BOOT)
U_BOOT_CMD_MKENT(bootbus, 5, 0, do_mmc_bootbus, "", ""),
U_BOOT_CMD_MKENT(bootpart-resize, 4, 0, do_mmc_boot_resize, "", ""),
U_BOOT_CMD_MKENT(partconf, 5, 0, do_mmc_partconf, "", ""),
@@ -992,6 +992,14 @@ static int do_mmcops(struct cmd_tbl *cmdtp, int flag, int
argc,
return cp->cmd(cmdtp, flag, argc, argv);
}
+#if CONFIG_IS_ENABLED(SUPPORT_EMMC_BOOT)
+static int do_mmcboot(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ return common_diskboot(cmdtp, "mmc", argc, argv);
+}
+#endif
+
U_BOOT_CMD(
mmc, 29, 1, do_mmcops,
"MMC sub system",
@@ -1016,7 +1024,7 @@ U_BOOT_CMD(
" WARNING: Partitioning is a write-once setting once it is set to
complete.\n"
" Power cycling is required to initialize partitions after set to
complete.\n"
#endif
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
+#if CONFIG_IS_ENABLED(SUPPORT_EMMC_BOOT)
"mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n"
" - Set the BOOT_BUS_WIDTH field of the specified device\n"
"mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n"
@@ -1046,3 +1054,11 @@ U_BOOT_CMD(
"display MMC info",
"- display info of the current MMC device"
);
+
+#if CONFIG_IS_ENABLED(SUPPORT_EMMC_BOOT)
+U_BOOT_CMD(
+ mmcboot, 3, 1, do_mmcboot,
+ "boot from eMMC",
+ "[loadAddr] [dev:part]"
+);
+#endif
--
2.17.1
