On Sunday 27 December 2020 18:28:25 Andy Shevchenko wrote: > On Sun, Nov 29, 2020 at 6:53 PM Pali Rohár <p...@kernel.org> wrote: > > > > Now when usbtty serial console is fixed in U-Boot enable it for Nokia RX-51 > > board by default. > > > > CONFIG_CONSOLE_MUX is already used and U-Boot console is available for > > all in/out devices. Therefore there is no need to have separate commands > > 'run sercon', 'run usbcon' and 'run vgacon', so remove them. > > > > As space for U-Boot is limited to 256kB, disable some other unused options > > so CONFIG_USB_TTY can be enabled. > > > > Nokia RX-51 does not have easily accessible UART serial console so the only > > option for easy debugging is to use device's keyboard+screen or this usbtty > > serial console over USB. > > I think it's not a good idea to revive usbtty.
Well, but u-boot does not support anything else for Nokia N900. And main issues here are musb bugs which this patch series is fixing. For debugging is serial console (e.g. usbtty) needed. > I was recently playing around f_serial.c (I can send you the half > baked stuff, which by a lot of twisted code in DWC3 driver is not > working properly, actually almost not working) and I think that would > be the right thing to do. > > usbtty quite old, intrusive way of serial console via USB supported > only by outdated hardware (like this Nokia N-900), while f_serial > gotta work on better recent base. And I believe musb should be, if > needed, patched to support composite devices. > > So, kinda disagreement from my side as a summary on this. > But disclaimer, I'm not a maintainer here, just my 2 cents. > > > > > -- > With Best Regards, > Andy Shevchenko
