[PATCH] board: amlogic: vim3: read ethernet MAC address from efuse

[Marek Szyprowski]

Add the board specific code for reading built-in ethernet MAC address
from efuse.

Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com>
---
 board/amlogic/vim3/vim3.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
index 09ef39ff30..a36df61583 100644
--- a/board/amlogic/vim3/vim3.c
+++ b/board/amlogic/vim3/vim3.c
@@ -11,6 +11,7 @@
 #include <net.h>
 #include <asm/io.h>
 #include <asm/arch/eth.h>
+#include <asm/arch/sm.h>
 #include <i2c.h>
 #include "khadas-mcu.h"
 
@@ -129,9 +130,27 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd)
        return 0;
 }
 
+#define EFUSE_MAC_OFFSET       0
+#define EFUSE_MAC_SIZE         6
+
 int misc_init_r(void)
 {
+       uint8_t mac_addr[EFUSE_MAC_SIZE];
+       ssize_t len;
+
        meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
 
+       if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
+               len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
+                                         mac_addr, EFUSE_MAC_SIZE);
+               if (len != EFUSE_MAC_SIZE)
+                       return 0;
+
+               if (is_valid_ethaddr(mac_addr))
+                       eth_env_set_enetaddr("ethaddr", mac_addr);
+               else
+                       meson_generate_serial_ethaddr();
+       }
+
        return 0;
 }
-- 
2.17.1