[PATCH 3/6] adc: meson-saradc: skip hardware init only if ADC is enabled

[Marek Szyprowski]

The driver skips hardware initialization if it is already configured by
the earlier bootloader stage (BL30). Skip the initialization only if the
hardware is really initialized and enabled.

Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com>
Change-Id: I3e2e2d270ad3e7e7f38e2bc3ce2a924a47b164af
---
 drivers/adc/meson-saradc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/adc/meson-saradc.c b/drivers/adc/meson-saradc.c
index 998cef24d88..ce7ae990ad0 100644
--- a/drivers/adc/meson-saradc.c
+++ b/drivers/adc/meson-saradc.c
@@ -512,8 +512,11 @@ static int meson_saradc_init(struct meson_saradc_priv 
*priv)
         * reading the temperature sensor.
         */
        regmap_read(priv->regmap, MESON_SAR_ADC_REG3, &regval);
-       if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED)
-               return 0;
+       if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED) {
+               regmap_read(priv->regmap, MESON_SAR_ADC_REG3, &regval);
+               if (regval & MESON_SAR_ADC_REG3_ADC_EN)
+                       return 0;
+       }
 
        meson_saradc_stop_sample_engine(priv);
 
-- 
2.17.1