Re: [PATCH 4/4] ARM: dts: stm32: Add USB OTG ID pin on DH AV96

[Patrick DELAUNAY]

Hi Marek,

From: Marek Vasut <ma...@denx.de>
Sent: mardi 1 décembre 2020 11:29

Add USB OTG ID pin mux and switch the USB OTG port from peripheral to OTG mode.

Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Patrice Chotard <patrice.chot...@st.com>
Cc: Patrick Delaunay <patrick.delau...@st.com>
---
  arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts | 3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts 
b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts
index 88f25d89b2..9b5dda318e 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts
+++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts
@@ -192,7 +192,8 @@
  };

&usbotg_hs {

-       dr_mode = "peripheral";
+       pinctrl-0 = <&usbotg_hs_pins_a>;
+       pinctrl-names = "default";
        phys = <&usbphyc_port1 0>;
        phy-names = "usb2-phy";
        status = "okay";
--
2.29.2

Reviewed-by: Patrick Delaunay <patrick.delau...@foss.st.com>

Thanks

Patrick